The Lippert Components Anti-Billowing Kit for Solera Slide Topper Awnings - Black # LC78FR is designed to fit right over the slide awning roller as pictured. The inside diameter of the arm is 2.545 inches according to my tech contact at Lippert. view full answer...
Since your motorhome weighs 24,000 lbs and it was built on a 2017 Ford F-53 chassis you will want the following sway bars:
Front Anti-Sway Bar - Roadmaster item # RM-1139-148
Rear Anti-Sway Bar - Roadmaster item # RM25VR
I have linked installation videos below for both parts.
We do have a steering stabilizer for your motorhome. It is the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes item # RM62RR. view full answer...
Thanks for the picture and the dimensions. Based on what you have given me we have a couple of options for lug nut covers. The first is the Wheel Masters Lug Nut Covers - Stainless Steel - Ford - 1-1/16" - Qty 8
Item # WM8011 you referenced. This lug nut cover is 1 9/16" tall. This is for Ford wheels.
The second option is the Wheel Masters Lug Nut Covers - Stainless Steel - 1-1/2" - Qty 6 item # WM8012. I have attached a diagram with the dimensions of this lug nut cover. I recommend you... view full answer...
I reached out to the manufacturer, Lippert, who was able to give me some of the dimensions you were looking for regarding the Trailair Air Ride 5th Wheel King Pin - Fabex 750, 765 and 770, RBW 7028 # UF35-946212.
They didn't have the dimensions from the bolt holes, but were able to provide me with the spec sheet they did have, which shows the length, width, and height, which should be useful for you. As you can see by the accompanying cut out of the sheet, the Trailair Air Ride # UF35-946212... view full answer...
I contacted Roadmaster on your behalf who confirmed the rear bushing you are looking for is # RM205222-10 for 1-5/8" sway bars while the front bushings # RM-205219-10 are for 1-3/8" sway bars.
Included is a video resource for additional information. view full answer...
For the Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Hub Mount - 135-Degree Bend # WM8001-135, the inner hose is 13 inches straight and the outside hose is 9-1/2 inches. I've attached a photo to help. view full answer...
I spoke with my contact at Curt about hitch # C13902. The overall width is approximately 41-1/2 inches. The bolt holes are approximately 39-1/2 inches apart on center. view full answer...
The B355 endlinks that come with the End Link Kit for Roadmaster Rear Anti-Sway Bar for Pickup Trucks # RM-590170-00 have a center hole measurement of 14 inches, while the overall length is 15-1/2 inches. I've attached a diagram to illustrate.
The Endlink Kit is designed to be used with Roadmaster Rear Anti-Sway Bar # RM-1139-173, which fits certain model year Ford Super Duty trucks. view full answer...
I took some measurements of Replacement Fan Motor Assembly Kit # FVK8017-00 for you. The width across the center of the bow tie is 12-5/8 inches. The outer diameter of the fan is 11-3/8 inches.
On the mounting holes on the bow tie they are 11-1/16 inches on center side to side and 5-15/16 inches on center top to bottom. I have included a picture showing these measurements for you.
It is a 3-speed fan. view full answer...
The Replacement Fan Switch for Ventline RV Range Hoods is 0.85" long x 0.594" wide x 0.9" deep (from bottom of bezel to the terminals). This replacement switch is designed to fit on Ventline S0721 Series range hoods. If you have a different range or size switch, please let me know and I can help you find a different replacement. view full answer...
The Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes # RM-RBK22-RSSA is approximately 20 inches long and will fit a 2013 Ford F-53 chassis with a GVWR of 15,700 lbs 16,000 lbs 18,000 lbs, 20,500 lbs, and 22,000 lbs.
As a note the best way to enhance the ride of your motorhome which was built on a 2013 Ford F-53 chassis is to add an aftermarket rear anti-sway bar because they are a vast improvement over the OEM sway bars and their placement at the rear... view full answer...
The Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 is capable of supporting up to 1,600lbs of tongue weight. I do recommend verifying that the weight of your bike and the carrier does not exceed the capacity of the receiver and will not exceed the GVWR for your chassis. view full answer...
The dimension of the SumoSprings Rebel Custom Helper Springs - 2 Piece - Front Axle # SSF-170-40-2 that you are seeking is the 8-1/2 inches from bracket to bracket. Anything larger than that will create separation which is ideal for steering to keep your wheels on the ground when needed but anything shorter than that will cause compression and will give stability. You can see both of these actions in the attached video. view full answer...
To replace your 2006 Holiday Rambler's electric steps, I recommend the Kwikee Electric RV Step Complete Assembly item # LC3658373. These electric steps are 24" wide and 11-1/8" deep. This is a complete kit too that comes with everything needed to install including door switches that will automatically open and close when the door opens and closes.
The Kwikee item # LC3658373 feature an automatic shut-down if the step strikes an obstacle and the weatherproof wiring and connectors will prevent... view full answer...
I was able to get the measurement you were looking for from the spring to the top of the bracket of the Timbren Front Suspension Enhancement System # TFFF53B.
As you can see in the accompanying photo, that length is 7 inches.
This is a fit for the front axle of a 2006 Ford F-53 with front leaf springs. If you also wanted the Timbrens for the rear axle the correct fit is the Timbren Rear Suspension Enhancement System # TFRF53A.
Adding the Timbrens to your motorhome will allow for a smoother... view full answer...
Yes, there is a 12 volt power source on the 7-way that is on your 2011 Ford F-53 RV. It will be on the 11:00 position of the connector as you look at the front of it. Check out the picture I attached that has a picture with all of the terminals of a 7-way labeled with their functions.
You might want to test for voltage on this circuit with a Circuit Tester # 3808 as well just to be sure.
I also attached an FAQ article on trailer wiring that you might find informative. view full answer...
In regards to the Curt Trailer Hitch Receiver part # C15445, the distance between the top two mounting holes front to back is 17.695". view full answer...
I went out to the warehouse to check the wire gauge on Right Angle 3-Wire Pigtail # A47PB. Each of the 3 wires is 18 gauge. At 10 inches in length 18 gauge automotive-grade wire can handle a maximum of approximately 15 amps which is much more than any light that it goes with pigtail A47PB. view full answer...
The Roadmaster Rear Anti-Sway Bar # 1139-144 that you referenced is a 1-3/4 inch thick anti-sway bar. I confirmed this with Roadmaster.
To determine if you will need the u-bolt kit # RM-590050-00 you will need to check out the current u-bolts your rear suspension is using. Basically if the u-bolt has enough threads above the nut to accommodate an additional 1/2 inch thick plate being attached to it you would not need the kit. If there's not enough threads on the u-bolt to accommodate an... view full answer...
The distance from the center of the front hole to the center of the rear hole is 17-3/16 inches, and then the distance from the center of the rear hole to the middle hole is 5-3/4 inches. view full answer...
Go To Results