In order to have separate turn and brake lights on your trailer, I strongly recommend using a 2-wire to 3-wire converter, like the Tow Ready # 118158 on the trailer. This will allow you to have 4-way connectors on both the vehicle and the trailer. The 4-way connectors are much more common than 5-way connectors, and will allow to you tow other things with your vehicle, or tow your trailer with other vehicles, without the need for an adapter. This converter box is not designed to be exposed... view full answer...
Yes both the roof racks you mentioned do fit your 2020 Hyundai Elantra:
Thule part numbers # TH711420, # TH710501, and # TH145069
Rhino Rack # RRVA118B-2, # RRRLKVA, and # DK461 view full answer...
Both the Thule Passage Trunk Rack # TH910XT and the Thule OutWay Trunk Rack # TH45JV are confirmed to fit your 2009 Hyundai Elantra. There are a few differences to justify the price difference between the two.
The # TH45JV has an updated cradling system with 2 layers of cushioning to absorb road shock and absorb vibration as compared to the single layer of the # TH910XT. The # TH45JV also includes a cable lock to help secure the bikes to the rack and a lock to secure the rack to the car.... view full answer...
I checked with Thule and the OutWay 3 trunk mount bike carrier # TH56BV is a fit for your 2013 Hyundai Elantra GT.
If you will be carrying any bikes that do not have a top frame bar that goes straight across (like a typical men's bike would) then I recommend using bike adapter bar # 64005. This will allow you to carry those bikes more level and will provide better ground clearance. I have to use these adapters and without them my wife's bike would be at a severe angle and I would not be... view full answer...
The Curt Class I hitch you referred to, part # C11400 WILL fit Korean-built Elantra GT models. You can see the installation instructions by clicking the provide link. view full answer...
I do have an option for you for extra storage but the owners manual on your 2010 Hyundai Elantra does not recommend using that vehicle for trailer towing. A lot of people still do it but it is not recommended by the vehicle manufacturer and could lead to damage to the vehicle.
Instead I recommend using a cargo carrier on your hitch. If you do not have a trailer hitch yet, I recommend the Draw-Tite Class I hitch part # 24795 if you have a Sedan or the Draw-Tite Class I hitch part # 24844... view full answer...
The Demco Kar Kaddy X Tow Dolly w/ Disc Brakes - Tilt Bed Frame - 4,800 lbs - Wide Tread # DM9713093 will work for your 2022 Hyundai Elantra Hybrid. It looks like your curb weight, depending on your configuration, is no more than 3,069 lbs and the weight of the dolly is 510 lbs so you will not exceed the towing limits of your motorhome.
For the lights, you will not need to have the lights on your vehicle powered on. The Kar Kaddy X has a full LED DOT lighting package that includes brake,... view full answer...
While we don't have a block heater that fits your 2020 Hyundai Elantra we do have a heated dipstick option with the part # KH15200 which would help out. view full answer...
For your 2018 Hyundai Elantra SE we have the Draw Tite hitch part # 24939 which is a confirmed fit and would work great. It has only the lower hitch opening visible which allows it to be a bit more hidden.
If you wanted trailer wiring the Tekonsha kit part # 118692 would be a great option as well as it's easy to install and our most reliable option. view full answer...
There are a couple of possible wiring options for the 2011 Hyundai Elantra. I have included a link to them for you to view. I would go with the Tow Ready harness # 118532. It requires a direct connection to the vehicle battery to power the trailer lights. This protects the vehicles sensitive wiring. I have included a link to the installation instructions for you. I have also included a link to an FAQ article I wrote with tips on routing the power wire for the wiring harness. view full answer...
It sounds like you are referring to the ball mount that fits into the 1-1/4 inch square receiver on the Draw-Tite Trailer Hitch, # 24902. The ball mount, pin and clip is not included with this trailer hitch. With a Class I trailer hitch like this, you can only use the ball mount recommended by the trailer hitch manufacturer.
If you are talking about the installation hardware, parts 1, 2, 3, and 4 in the instructions, those items should have been included with the rest of the hardware.
For... view full answer...
We have several hitches that are specifically designed to fit the 2009 Hyundai Elantra sedan. The trailer hitch that you have referenced, # 24844, is designed to fit the 2009 - 2011 Hyundai Elantra Touring Hatchback, so it will not fit the sedan. The difference is that # 24844 has a longer receiver tube so it is not too far under the vehicle.
The Sedan rear end has a different shape so the receiver tube is shorter. The comparable trailer hitch for a sedan model is # 24795. I have included... view full answer...
There aren't a whole lot of options for a roof rack on your 2016 Hyundai Elantra GT with the panoramic glass roof but I was able to get a confirmed fit from Thule.
You would need the fit kit part # THKIT1695, for crossbars the part # TH711420 and then the foot pack part # TH480R. We normally don't recommend opening any type of sun roof on a vehicle with a roof rack installed as the wind noise is pretty intense from the crossbars.
Yes we do test fits at our location here in Wentzville,... view full answer...
You can contact the dealer and have them look up the VIN and they should be able to tell you. There is also a sticker on the driver side door jamb that should show where the vehicle was made.
The issue is that on Korean built models there is a hole that is not present on the frame that would have to be drilled using the hitch as a template. All the other attachment points are correct. This is an issue on the sedan models but we have not heard about issues on the hatchbacks. view full answer...
It is safe to carry two bikes on a trunk rack on the highway. I have carried two bikes from Washington DC to St. Louis and back with the Saris Bones EX 3 Bike Rack - Trunk Mount - Adjustable Arms, part # SA803. It is my go to trunk rack recommendation. It has adjustable arms to get a better fit than a fixed arm rack. It has rubberized fit to protect the finish of your car. It an work with cars that come with spoilers. It can also fold flat for compact storage. Lastly, it is made in the... view full answer...
I do have a set of ISSE Hybrid Snow Socks that will fit your 2008 Hyundai Elantra with standard size tires but the ISSE Hybrid Snow Socks part # TCH58 will not. For a set of ISSE Hybrid Snow Socks that will fit both standard tire sizes (195/65-15 or 205/55-16) you will want to use part # TCH62.
If you have a different size tire please let me know and I'll see if we have a better fit for you. view full answer...
According to the folks at Draw-Tite, the reason the # 24905 Class I hitch won't fit Korean manufactured models is that the rear bumper/frame area of the vehicle is slightly different on Korean made models. The exhaust is routed differently, and will prevent the hitch from being installed, and the driver's side mounting bracket will be blocked by an obstruction on the rear of the vehicle.
I can't speak to what was different about the one reviewer's vehicle that allowed the hitch to fit,... view full answer...
For your 2016 Hyundai Elantra GT hatchback that was made in Korea (second letter of VIN is letter M) the Curt hitch part # C11400 is the hitch you'd need as it's the correct fit.
If you were looking for trailer wiring too the Tekonsha kit part # 118692 is what I recommend as it installs very easily and also has a very reliable converter box. view full answer...
Both the 2015 and 2016 model years of the Hyundai Elantra are part of the car's 5th generation. This will tend to mean that they will share fits for aftermarket parts like trailer hitches such as the Draw-Tite # 24902. I did check with my technical contact at Draw-Tite and hitch # 24902 is indeed a confirmed carry-over fit for the 2016 Elantra Sedan and Coupe versions. Curt hitch # C11303 has also been confirmed as a carry-over item for the Sedan.
I have linked an installation video, written... view full answer...
For your 2021 Jayco 27RL I recommend the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 5" Screen Item # FCE48TASL-05. This system has the three cameras and 5" monitor screen you're wanting and is Furrion branded so you'll be able to easily install this on your camper. view full answer...
Go To Results