I spoke with my contact at Sportrack and he informed me that the front bar scale to use is 16 inches, the rear is 14 inches.
From where the front and rear doors meet the front bar sits 8 inches in front of that. Then the rear bar is 24 inches behind the front measured on center. view full answer...
The receiver tube of the Curt # C11265 Class I hitch measures 5-1/2 inches long, as you can see in the provided photo. The # C11265 is a fit for the 2003-2019 Toyota Corolla.
If you'll be using the hitch for light-duty towing, you'll need a few other items to complete your towing system. For a trailer wiring harness, use the Curt # 55542. For a ball mount, use # C45521 and # PC2 for a hitch pin. For a 1-7/8 inch trailer ball, use # A-80 or # A-82 for a 2 inch ball. view full answer...
From what I have found, the John Deere S100 weighs 414 lbs without fuel. The Curt # C11265 has a max gross trailer weight of 2,000 lbs so that will not be a problem. However, you will want to consult your owners manual since you will be limited by the capacity of your vehicle. You will also need to account for the weight of the trailer you use.
In addition to the hitch you will need the T-One Vehicle Wiring Harness # 118405. This plugs into the connection points in your rear cargo area... view full answer...
Tensile strength is not available in regards to this adapter because it is only rated to be used on certain Thule accessories and should not be used for other purposes. Due to this there would not be a reason for Thule to have information regarding tensile strength. view full answer...
The Brophy Hitch Adapter, part # HT5R is designed to be inserted in a 1-1/4 inch trailer hitch receiver and gives you a 2 inch receiver for hitch mounted accessories like bike carriers or cargo carriers. Using an adapter like # HT5R will reduce the tongue weight capacity of your hitch by 50 percent. If the hitch you have installed is a Class l hitch with a 200 lb tongue weight capacity, you will reduce that to 100 lbs. That weight includes the weight of the carrier and any cargo in the... view full answer...
I went out to the warehouse and pulled the Skull with L.E.D. Eyes Trailer Hitch Receiver Cover, item # CR-018, to measure for you. There are two hitch pin holes in the 1-1/4 inch shank portion of the cover. The first is 2-1/8 inches from the back of the skull and the second is 2-3/4 inches. From the top of the shank to the top of the skull is 1-1/2 inches. So as long as you have 1-1/2 inches above the top of the receiver opening at 2-1/8 or 2-3/4 inches from the center of the hitch pin... view full answer...
With Curt trailer hitch # C11265 installed on your 2016 Toyota Corolla the distance from the ground to the bottom of the hitch will be approximately 9-1/4 inches. It measures 10-3/4 inches from the ground to the top of the receiver opening.
If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch.
Curt... view full answer...
The maximum trailer hitch size your 2012 Toyota Corolla can accommodate is Class I. The one I recommend is the Draw-Tite # 24913. You will be able to fit Class-I accessories with the 1-1/4 inch receiver opening. I have attached an installation video for you to look at.
I recommend checking your owners manual to verify the capacities of your 2012 Corolla. From what I could find, it looks like your Corolla has a maximum tongue weight of 100 pounds and maximum towing capacity of 1,000 pounds.... view full answer...
We actually do have a trailer hitch for your 2020 Toyota Corolla Sedan! It is the Class I Draw-Tite Sportframe Trailer Hitch Receiver # 24983 and it has a 1-1/4" hitch receiver.
You did refer to this as a tow hitch so if you planned on using this trailer hitch for towing you also need some wiring and a ball mount kit. I recommend the Tekonsha T-One # 118810 for wiring because of how reliable it is and that it bypasses your OEM wiring so you know your vehicle is protected. For a ball mount... view full answer...
From my research, I found that your maximum towing capacity for your 2007 Toyota Corolla S is 1,500 pounds. This is the amount of weight that your vehicle can tow horizontally out of your rear hitch receiver. As far as a the amount of tongue capacity, your vehicle has a maximum tongue weight capacity of 300 pounds. This is the amount of weight that your vehicle can take vertically on your hitch. However, in order to know for sure, I recommend consulting with your owner's manual for the... view full answer...
Having a 16" wheel and tire that measures 26-1/2" is a little odd as, typically, these will be right at or a little over 30" in diameter. 14" wheels, like the # LH84VR which has an ST205/75r14 tire as an example, will measure 26.14" in diameter, so if you only have room for a 21" diameter, this will not be a good option.
For the diameter you are looking for, you will need something like the Kenda 4.80-12 Bias Trailer Tire with 12" White Wheel # AM30660. This will have a diameter of 20.7"... view full answer...
I went out to the warehouse and measured the distance between the base plate brackets on the Roadmaster XL Base Plate Kit, item # 1165-1. The distance is 28-3/8 inches on center between the mounting holes. I have posted a photo with the measurement I took added to it for you to see. view full answer...
Curt measures rise differently and everyone else just goes by the specs Curt provides. All of our rise and drop measurements are taken the same way (unless otherwise noted). Curt estimates rise and drop. We measure from the top of the receiver opening to provide the exact. So from the top of the receiver opening to the top of the ball platform it is 5-3/8 inches when ball mount # C45028 is in the rise position and 6 inches in the drop position.
Like you said that is the highest available... view full answer...
The Curt Cargo Carrier, part # C-18145 has an overall capacity of 500 lb,s but this capacity will be limited by the tongue weight capacity of your Class I hitch. A class I hitch typically has a tongue weight capacity of 200 lbs, which means that the carrier itself and whatever is placed on it cannot weigh more than 200 lbs. Your hitch should have a sticker on it that will list its tongue weight capacity.
Please note that exceeding the tongue weight capacity of the hitch can result in... view full answer...
A vehicle's roof weight capacity may not always appear in the owner's manual, although you certainly would expect to easily find this information there. Sometimes you will need to inquire at the local dealership to find this out. I checked the available online data on the Toyota website and could not find this information. Usually dealers can look up the car's VIN and confirm roof capacity.
The roof racks made for any given car, such as the 2019 Corolla sedan, can have a different weight... view full answer...
The Draw-Tite # 24983 has a maximum tongue weight of 200-lbs, but your 2020 Toyota Corolla may have a slightly lower tongue weight and when towing/carrying items on the hitch you're always limited to the lowest rated component in the setup. As long as your vehicle can hold 200-lbs tongue weight then you can use the full capacity, but if the Corolla has less then you will want to abide by that number. view full answer...
Generally running boards like the Aries Oval Nerf Bars w/ Custom Installation Kit # AA4445024 have 300lb static weight capacity. Realistically though the running boards are going to be stronger than the rocker panel that they mount to so the capacity of the rocker panel is the better thing to check. view full answer...
The bolts included with the Curt Trailer Hitch # 11227 are M12 - 1.25 x 40mm hex. All of the hardware included with this hitch is listed in the installation instructions, see link.
On older vehicles it is a good idea to clean the threads with a wire brush, see video demonstration. The Battery Post and Terminal Cleaner, # DW00254, is a good choice for this purpose.
Since your vehicle is a 1992 model, you may need to use a tap or make one. Using a identically sized bolt you can create your... view full answer...
The 19X 47 Curt Carrier # C18110, weighs 30 pounds. Yes you must factor in the weight of the cargo carrier and cargo and any items loaded behind the rear axle of the car. You also need to check your vehicle maximum tongue weight rating and use the lowest maximum rating of the vehicle, hitch or cargo carrier as the weight that can be carried in the receiver hitch.
If you have a 200 pound max tongue weight rating and no items loaded in the vehicle behind the rear axle then you could carry... view full answer...
The Thule Passage 3 Bike Carrier # TH911XT has a total weight capacity of 105 lbs, but that's for all 3 bikes. When we break that down it comes out to 35 lbs per bike which is standard for trunk mount bike racks.
For your E-Bike you're going to need to install a trailer hitch on your 2016 Toyota Corolla and go with a hitch mount bike rack.
I recommend going with the Draw-Tite Trailer Hitch # 24913 and then using the Hollywood Racks Sport Rider SE 2 Electric Bike Rack # HLY74FR. This bike... view full answer...
Go To Results