Installation Tips and Bolt Thread Size for the Curt Trailer Hitch # 11227 on a 1992 Toyota Corolla
Question:
You say the bolts on the back side are 12 mm. Are they 12 mm X 1.50, or are they 12 mm X 1.75 ?
asked by: Henry W
Expert Reply:
The bolts included with the Curt Trailer Hitch # 11227 are M12 - 1.25 x 40mm hex. All of the hardware included with this hitch is listed in the installation instructions, see link.
On older vehicles it is a good idea to clean the threads with a wire brush, see video demonstration. The Battery Post and Terminal Cleaner, # DW00254, is a good choice for this purpose.
Since your vehicle is a 1992 model, you may need to use a tap or make one. Using a identically sized bolt you can create your own tap. We have a video showing this process for you to review also, see link.
Some items you may need to complete your towing setup are listed below.
Draw-Tite Trailer Wiring, # 119178KIT
1-7/8 inch Hitch Ball, # 19256
2 inch Hitch Ball, # 19258
![Bob G](https://images.etrailer.com/static/images/catg/people/287_tn.jpg)
Products Referenced in This Question
Tekonsha Tail Light Converter with 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 1-1/2 Feet Long
- Universal Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >