Distance from Ground to Bottom of Curt Trailer Hitch C11265 Installed on a 2016 Toyota Corolla
Question:
Can anyone tell me how much ground clearance there is with a Curt 11265 Trailer Hitch for my 2016 Toyota Corolla. I need to know the distance between the bottom of the hitch and the ground.
asked by: David
Expert Reply:
With Curt trailer hitch # C11265 installed on your 2016 Toyota Corolla the distance from the ground to the bottom of the hitch will be approximately 9-1/4 inches. It measures 10-3/4 inches from the ground to the top of the receiver opening.
If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch.
Curt also says you have to use stabilization strap # 18050 when using this hitch for any non-trailer load (such as a bike rack or cargo carrier) per their warranty requirements.
Products Referenced in This Question
Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Accessories and Parts
- Hitch Bike Racks
- Hitch Cargo Carrier
- Tie Down Straps
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Video: Curt Ball Mounts - Fixed Ball Mount - C45023 Review
- Shop: Curt Class I Drawbar - 3-3/4" Rise - 11-1/2" Long - 2,000 lbs
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Q&A: Distance From Center Of Hitch Pin Hole Of Curt Trailer Hitch C11265 To Face Of Receiver
- Video: Curt Ball Mounts - Fixed Ball Mount - C45021 Review
- Video: Curt Ball Mounts - Fixed Ball Mount - C45562 Review
- Video: Curt Class I Drawbar Review C45021
- Video: Curt Class I and II Pin and Clip Review
- Video: Curt Hitch Ball - Trailer Hitch Ball - C40018 Review
- Video: Curt Hitch Ball - Trailer Hitch Ball - A-82 Review
- Shop: Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2-1/2" Span
- Shop: Curt Class II Drawbar - 3-1/8" Rise - 11-1/4" Long - 3,500 lbs
- Shop: 2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs
- Shop: Curt Class I Drawbar - 4" Rise - 9" Long - 2,000 lbs
- Shop: Curt Class II Euro Style Drawbar with 2" Ball - 3-1/8" Rise - 3,500 lbs
- Q&A: Why Can't Class II Accessories Be Used with Class I Trailer Hitch Receiver
- Q&A: Trailer Hitch Recommendation For 2016 Toyota Corolla
- Q&A: Best Trailer Hitch Receiver for a 2006 Toyota Corolla Sport
- Q&A: Does Trailer Hitch on 2010 Toyota Corolla Cover Rear Jack Point
- Q&A: Least Visible Trailer Hitch Recommendation for 2009 Toyota Corolla
- Q&A: Difference Between Chrome Plated Steel Hitch Ball and Raw Steel in Terms of Corrosion Resistance
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 25580
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 90160
- Article: How to Measure for Trailer Hitch Drop
- Search Results: hitch
- Shop: Brake Controller