If the contacts on the battery terminals inside of the remote for your Air Lift WirelessAIR Compressor System became corroded and the remote still does not work once this corrosion was cleaned out then odds are the corrosion has spread to the contacts on the circuit board. If that was the case then you will need to replace the remote, the Replacement Wireless Remote for Air Lift WirelessAIR Compressor System part # AL73002 which is for the Air Lift WirelessAIR Compressor System for Air... view full answer...
There has been quite a bit of debating back and forth over whether or not a hitch like the # 13184 can be installed on your 2006 Toyota Tundra. The manufacturers have also had mixed answers on the fit over time. One thing is for certain, installation would require modification of the bumper and also the removal of the factory hitch. Even then, there is no guarantee you will be able to fit a custom hitch on your vehicle.
The best option would be to use a universal hitch like the Draw-Tite... view full answer...
The correct mounting hardware kit for the Westin HDX Grille Guard # 57-2235 on your 2012 Toyota Tundra is the part # 57-223PK. This kit includes all the needed hardware and custom brackets so you can install the grille guard on your truck (without worrying about hood interference).
I have attached the written installation instructions that you can check out as well. view full answer...
From what I could find, it looks like the TruXedo Lo Pro QT cover that fits your 2008 Toyota Tacoma with 5' bed would be the 555801 cover. That would make the Replacement Tarp for TruXedo Lo Pro Soft Tonneau Cover # TX1117751 the correct replacement tarp for your cover.
I do recommend verifying that you have the 555801 cover, because replacement tarps will be model specific. view full answer...
There are two washers types included in the mounting hardware for the Thule Canyon XT # TH859XT. They are the 20mm diameter fairing washer # TH73FR and the 12mm diameter washer. The part you need is 6 of the 12mm diameter washers for mounting to the U-bolts. I confirmed with my tech at Thule that those washers are the Replacement M6 Washer # 951061254. view full answer...
With the Sears carriers having most parts no longer available, from our experience the Replacement Lock Core and Key for SportRack Explorer Cargo Box # SR03807 is the lock core that works on most Sears carriers. If you wanted to let me know what model carrier you have, I would be happy to confirm this for you.
Unfortunately, there is no way to have the # SR03807 keyed alike. view full answer...
We do have a replacement for a Timken 07000 bearing, as it has a 1.000 inch inner diameter, so what you can use is the Replacement Trailer Hub Bearing # L44643.
In regards to seal, that will depend on the diameter of your spindle where the grease seal rides, but if it is the same 1.000 inches we do have the CE Smith Grease Seals - 10174VB - Single Lip # CE16305A.
Otherwise, if you let me know the number on your seal (if possible) or the diameter of your spindle (to the thousandths of... view full answer...
Yes! If you are talking about replacement mounting brackets for the Detail K2 Storm II Snowplow - 84" Wide x 22" Tall # K2STOR8422, we do carry them for your 2019 Toyota Sequoia! That is the Custom Mounting Brackets for Detail K2 Snowplows # K285113. view full answer...
The Thule 753-3220 has been discontinued, but C Clamps that will work for 2016-current Toyota Tundra models are available as part # THXK4. The kit includes the necessary (8) 2-1/4 x 3/8 inch diameter bolts. Thule confirms that the kit is compatible with your Xsporter ladder rack. The clamp kit allows the Xsporter rack to attach to the bed rail system in your 2017 Tundra. view full answer...
Typically the seals on the Extang covers are replaceable. I have listed the seals we have available for the Extang Solid Fold 2.0 covers we have available below.
- Replacement Side Seal for Extang Solid Fold 2.0 Tonneau Covers # EX32560368
- Replacement Cab Seal for Extang Solid Fold 2.0 Tonneau Covers # EX32000120
- Replacement Tailgate Seal for Extang Solid Fold 2.0 Tonneau Covers # EX32563200
These replacement seals will work with the Extang Solid Fold 2.0 covers. If you have a different... view full answer...
The Replacement Tarp for Extang Trifecta 2.0 Soft Tonneau Cover, # EX92915-20 that you reference is the correct replacement cover for a 2011 Toyota Tacoma 6 foot bed that has an Extang Trifecta 2.0 Soft Tonneau Cover, # EX92915 installed.
If you have an original Extang Trifecta Series B Soft Tonneau Cover, then the # EX92915-20 is not confirmed to fit and I recommend you update your truck with the Extang Trifecta 2.0 Soft Tonneau Cover, # EX92915. view full answer...
You will need the Replacement Canvas # EX97VJ for the Extang Trifecta Signature 2.0 Soft Tonneau Cover # EX94801 on your 2007 Toyota Tundra with the 5'7" bed. view full answer...
It sounds like you are seeking the Replacement Adapter Sleeve for Yakima HighLite and DoubleDown Ace Bike Racks # Y8890342. Then for the pin you will want the pin and clip # Y8890176.
If I misunderstood what you were asking please provide a little more information. view full answer...
I reached out to Progressive Dynamics to find a replacement for your WFCO wf9960 that will give you an output of 14.5 VDC. For an equivalent converter/charger you need the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger - 60 Amp # PD4560K18LS8 (PD4560A).
This uses a custom charging profile for lithium and multistage charging for lead acid. It has a high voltage output to provide a full, quick charge for your lithium batteries. It has an output... view full answer...
Per Extang you will need the Replacement Custom Tarp # EX42CR for your 2004 Toyota Tundra Limited Access Cab with 6' bed and the Extang Classic Platinum Tonneau Cover. view full answer...
For your older Thule bike rack with 2" shank you can use Replacement Threaded Pin for Thule Snug Tite Hitch Lock and Anti-Rattle Device # TH62RE as a replacement. If you would like a locking pin then use Thule Snug Tite Hitch Lock and Anti-Rattle Device # THSTL2. I attached a couple demonstration videos for you to check out. view full answer...
I spoke to Extang and they were able to identify the cover for me. They said that you have an Extang Express Soft Tonneau cover 50840.
The Replacement Tarp # EX49840 is the part that you need to order for that cover. view full answer...
According to the serial number you sent in your Lippert pin box is a 1116. This means the correct Reese Goose Box replacement is part # RP94716-61301 but I have a different recommendation for 2 reasons; this pin box is only rated for 16,000 lbs and the GVWR of your Keystone is 16,500 lbs so you can potentially overload the pin box, plus the parent company of Reese was bought out not long ago (as of May 2023) and availability of a lot of their products is still up in the air so it may be... view full answer...
Yes, the replacement tarp part # EX92915-20 is the correct replacement cover for a 2008 Toyota Tacoma 6 foot bed that has an Extang Trifecta Tonneau # EX92915 installed. As long as your cover is an Extang Trifecta this is exactly what you'd need! view full answer...
The Hydraulic Trailer Brake Kit, # AKUBRK-35 that you linked to is for a 10" diameter x 2-1/4" wide and for 4 bolt flange. It does appear that his will fit the application you are asking for, for the 1999 Demco Kar Kaddy Model KK360 with drum brakes. However, I will point out that we have the recommended replacement brake assemblies for the Demco Kar Kaddy in # DMSB24429M for the left side and # DMSB24428M for the right.
The # AKUBRK-35 is a good product but Demco does recommend the... view full answer...