The Thule Xsporter Pro and TracONE Ladder Rack Adapter Kit for Toyota Tacoma - 2016 to Current - Black # THXK4B or the # THXK4 in silver are the adapter kits for your Xsporter off your 2011 Tacoma. This will make your rack compatible with your 2018 Tacoma. view full answer...
I contacted the manufacturer with the date code that you were able to provide and they were able to tell me that the correct replacement tarp/vinyl for the cover on your 2009 Toyota Tacoma with 5' bed is the Replacement Tarp for TruXedo Lo Pro Soft Tonneau Cover # TX1117751. view full answer...
The correct replacement tarp for your Extang Blackmax tonneau cover is the Replacement Tarp for Extang BlackMax Soft Tonneau Cover # EX1905. view full answer...
We've checked with Lock N Roll in the past and while they don't offer a locking pin for the ball mount portion of the # 336VS511 they do know that the Fastway Hitch Lock part # FA86-00-3660 does fit it. view full answer...
Yes, to replace the plastic housing on the Dutton-Lainson Covered Hand Winch # DL17027 you just need the part # DL62QR.
I confirmed this with my contact at Dutton-Lainson. view full answer...
For the Replacement End Cap for Thule Xsporter Pro Truck Bed Ladder Rack # 852-3214001 on a Thule Xsporter # TH500XTB-THXK3, you will need to purchase the screw separately. I confirmed with Thule that the screw you need is the Replacement M6-1x14mm Socket Head Cap Screw for Thule Ladder Racks # THHD-27059. view full answer...
We have the Firestone 1/4" Air Line Tubing # F9416 which will provide you with 30 feet of Firestone 1/4" air line. You mentioned only needing 10', but this would provide you with additional tubing should another issue arise.
When inserting the air line into the fittings, having a perfectly squared cut is crucial to avoid leakage. We recommend using a tubing cutter like part # AL10530. view full answer...
The Westin Signature Series Step Bars, Black Powder Coated, for Toyota Tacoma # 25-2775 will use the Replacement Step Pad for Westin E-Series Nerf Bars - 21" Long x 3" Wide - Qty 1 # 23-0001. I confirmed this with my contact at Westin. view full answer...
First you are going to need to identify the cover on your 2013 Toyota Tacoma. Since it was installed by a dealer you will want to first check underneath your tarp for and manufacturer information stamped onto the tarp itself. Next you will want to check the rails for any tags or decals which identify the tonneau cover manufacturer and model number. Without any of this information it is impossible to verify the correct replacement tarp.
The Replacement Tarp # EX13660 for the Extang Tuff... view full answer...
We'd love to help you out! I was able to find what you're looking for, so what you'll want is the Replacement Tarp for Extang Classic Platinum Roll-up Soft Tonneau Cover # EX6905. view full answer...
If the plug you have on your 2008 Toyota Tacoma is the US Car Connector like the Curt # C56229 then you can simply use the Curt T-Connector # C55774 or the Hopkins # HM40975 to add 4-Way and 7-Way connectors to your vehicle. This is much more cost-effective and it a simple plug-in installation.
If you happen to have something else please send me a picture of it so I can see what we have that may be compatible. view full answer...
I recommend going with the Redarc Tow-Pro Elite # RED44FR for towing with your 2022 Toyota Tacoma for a few reasons; not only does it have a totally customized install when you pick up the Adapter # RED99FR and Mounting Panel # 331-TPSI-002, but it also gives you the most customizable towing experience. You can use proportional braking for normal, everyday use, but then you can switch it over to user-control mode if you'll be on the brakes a LOT or even going off-road!
This is easily... view full answer...
The correct replacement trap for the snap version of the Extang FullTilt SL Soft Tonneau Cover on your 2011 Toyota Tacoma with the 6' bed is the Replacement Cover for Extang FullTilt SL Vinyl Tonneau Cover part # EX5915. view full answer...
The 5,000 lb tow weight rating is definitely enough to safely tow a car trailer weighing in at 4,600 lbs total. The only time I would be nervous about the weight difference is if it was under 100 lbs in your situation.
According to my research the OEM hitch on your 2013 Toyota Tacoma installs using the bumper brackets so if you remove the OEM hitch you'll need to find replacement brackets for the bumper. Once that is done you can install an aftermarket hitch and for that I recommend the... view full answer...
To select new hubs that will properly fit on the spindles of your trailer axle you will need to identify the bearing part numbers from the original hubs. Both the original and new hubs' inner and outer bearings must match for the new hubs to fit on your spindles. You also need to confirm the axle weight rating along with the bolt pattern, which in your case is 4-on-4. The new hubs need to be rated correctly for your axle; the plate or sticker that should be on the axle itself will indicate... view full answer...
The correct replacement tarp for the Extang FullTilt Vinyl Tonneau Cover on your 2001 Toyota Tacoma with the 6' bed is the part # EX5870. The tarp that you were looking at is a fit for various Dodge Ram applications. view full answer...
The correct replacement hardware kit for the Westin Bull Bar on your 2007 Toyota Tacoma Sport will be the part # 32-160PK. This is the complete hardware kit for the Westin Ultimate Bull Bar # 32-1600 and # 32-1605, which are designed for the 2005-2015 Toyota Tacoma. It includes all of the necessary mounting hardware, including the brackets.
The Replacement Installation Kit # 32-169PK that you referenced is not the correct kit for your Tacoma, as this is a replacement kit for Bull Bars... view full answer...
We do not have all of the parts you would need available separately and to be honest, by the time you piece it all together you would not be saving much if any money because there are a number of parts that you would need (I have included a parts diagram you can check out).
Your best bet is to just get a whole new Air Lift Ride Control Air Helper Springs # AL59561 kit. Cost wise it is not going to be much more, if any. But then you know for sure that everything is in good working condition.... view full answer...