Expert Answers about Toyota RAV4

• Replacement 7-Way/4-Pole Trailer Connector for 2009 Toyota RAV4
• If you're comfortable doing the wiring, there's no reason why you can't snip off the vehicle side connectors of the Hopkins # HM43385 4-pole/7-way trailer connector to replace your existing 4-pole/7-way. The wire color codes are as follows: • Yellow wire-Left Turn/Brake Lamp • Green wire-Right Turn/Brake Lamp • Brown wire-Running Lamps • White wire-Ground • Purple wire-Reverse Lamps • Black wire-12-V Auxiliary Feed to Trailer • Blue wire-Output Voltage From Brake Controller to Trailer You'll...
  view full answer...


• Replacement Leaf Spring Needed with One Open End on a Bayliner Trailer
• It sounds like the 4-Leaf Slipper Spring w/ Open Eye End # e33SR could be what you are looking for. Over time leaf springs can stretch so this one being 1/4" shorter than your current leaf spring is most likely correct. This leaf spring is rated for a 4,300 lb axle and comes with 4 leafs. The amount of leafs isn't really important since you are simply looking for the weight capacity to be right at or slightly more than what your axle is rated for. The only real issue that I see is this...
  view full answer...


• Replacement # 753-3532 Adapter Plate to Fit Old Thule Spare Me Bike Rack on 2011 Toyota RAV4
• The old Thule Spare Me 943 isn't compatible with your new RAV 4, as you've already found out. Luckily enough, the replacement # 753-3532 mounting plate for the latest version of the Spare Me # TH963PRO would be compatible with your 2011 RAV 4 and with your older Spare Me bike rack. The plate is all you'll need to get the rack to fit on your new car. I've confirmed this with Thule for you.
  view full answer...


• Replacement End Caps for Thule AeroBlade Edge Roof Racks
• The correct end caps for the Thule AeroBlade Edge crossbars depends which mounting style you have. For the flush or fixed point AeroBlade Edge racks use parts # TH1500052334 for the right side and # TH1500052333 for the left. If your bars connect to raised side rails that run along the sides of the vehicle's roof use parts # TH1500052314 for the right and # TH1500052313 for the left.
  view full answer...


• Replacement Hitch Mounting Hardware for 2018 Toyota RAV-4
• Replacement hitch installation hardware kits are available with part # RHK; you'll just want to go to that page and put the part number of the hitch you're needing hardware for in the field marked "Hitch Item Number". For example, the Curt 2" hitch for a 2018 Toyota RAV-4 is part # C13149, so you'd put that in the "Hitch Item Number" field. I've linked all of the available hitches for your 2018 Toyota RAV-4 for you to look through and choose which one you've got.
  view full answer...


• Parts Needed to Install Brake Controller in 2009 Toyota RAV4
• For your 2009 Toyota RAV4 there isn't a plug and play style of brake controller install harness so you'd have to hardwire one in with the # ETBC7 plus a 4-way kit part # 118412 if you do not have a 4-way already. Those two parts would be all you need to install the brake controller part # 39523 that you mentioned in your 2009 Toyota RAV4. I attached an install video for the ETBC7 installed in a Rav4 similar to your 2009 model.
  view full answer...


• Can I Replace The Straps On A Yakima Raptor Roof Bike Carrier
• The rack in your photo is the Yakima Raptor. We do sell a replacement strap for that bike rack. The Replacement Rattler Wheel Straps for Yakima Bike Carriers (QTY 2). part # Y02082, has a tab that slides into the groove underneath the tray of your Yakima Raptor. I have included a product description link and a demo video of the straps below.
  view full answer...


• Replacement Hardware for a Thule Adventurer Cargo Box on Thule Aero Load bars
• The Thule Adventurer attaches to roof rack crossbars using hardware # TH04997. This hardware will fit around bars up to 3-3/4 inches wide. So if the standard hardware does not fit around the bars that you have then the u-bolts you mentioned, the EasySnap also will not fit. Also the EasySnap hardware is not a fit for the Adventurer box.
  view full answer...


• Replacement U-Bolt for a Thule Canyon XT Cargo Basket
• I have a solution for you but I contacted the manufacturer regarding this question and they informed that the Replacement U-Bolt for Thule Sidekick Cargo Box # TH02943 will not fit a Thule Canyon XT basket. They also told me that there is not a 4" wide option that is compatible with the Canyon XT. The Canyon XT Baskets like the # TH859XT use a 3-1/2" wide mounting point, so that is as wide of a U-Bolt that you can use. The replacement U-Bolt that is as close to the 4" x 2" you want is the...
  view full answer...


• Replacement Ring Terminal for T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
• I'm sorry to hear that you lost the ring terminal that came with your wiring harness. In order to replace the ring terminal that came with your T-One Vehicle Wiring Harness # 118801 you can use the Ring Terminal - 12-10 Gauge Wire - 5/16" Ring ID # 44-5356A.
  view full answer...


• How Are Lock Cores of Rhino Rack Roof Rack Replaced
• First, you are going to need a key for the old locks. Without the original keys or key number they can't be removed. The key is needed to depress the tumblers in the locks you have. Otherwise you will not be able to get them out. What is the number on the face of the locks you have? With the key inserted you will then need access to the back of the lock. At the back there is a metal tab holding the lock in. Use a flat blade tool or knife to press that tab down while at the same time pushing...
  view full answer...


• Replacement Mounting Hardware for Curt Class III Hitch on a 2019 Toyota RAV4
• You can get replacement hardware to install the Curt Trailer Hitch # C13416 on your 2019 Toyota RAV4 with part # RHK. Just fill in the blanks before ordering so we know what exact hardware you need. If you want to try acquiring the hardware locally then you'll need four hex bolts (M12-1.25 x 35mm, CL10.9) as well as four 1/2" conical tooth washers. Attached is an installation video on a 2019 RAV4 that you can check out.
  view full answer...


• Locking Hitch Pin Replacement for Reese Q Slot Bike Rack PS63138
• We found that the Saris hitch lock part # SA3022 fit the Q Slot bike rack PS63138 you have but since that rack is no longer available we do not have a replacement from Reese for it.
  view full answer...


• Trailer Wiring Harness Recommendation for 2022 Toyota RAV4
• The best trailer wiring kit that fits your 2022 Toyota RAV4 is the Curt kit part # C56434 which installs easily and has the most reliable converter box which means a lower likelihood of it shorting out and needing to be replaced. I attached an install video for this on a similar RAV4 for you to check out as well.
  view full answer...


• Trailer Hitch Recommendation for 2016 Toyota RAV4 for Yakima Bike Rack
• For your 2016 Toyota Rav4 the etrailer hitch part # e98864 would be your best choice for a hitch for carrying your Yakima DoubleDown. This hitch will fit well and work great with the bike rack plus has the best price so it's the hands-down best option. I attached an install video as well.
  view full answer...


• Are Replacement Lock Cores Available for Locking Knob on Swagman Upright Bike Rack
• Swagman does not provide replacement lock cores so you will need to replace each of the knobs on your Upright Roof Bike Carrier # S64720 with part # P1030. This does not have a keyed alike option so unfortunately you wouldn't be able to order it keyed alike.
  view full answer...


• Replacement Bearing For Timken 07000
• We do have a replacement for a Timken 07000 bearing, as it has a 1.000 inch inner diameter, so what you can use is the Replacement Trailer Hub Bearing # L44643. In regards to seal, that will depend on the diameter of your spindle where the grease seal rides, but if it is the same 1.000 inches we do have the CE Smith Grease Seals - 10174VB - Single Lip # CE16305A. Otherwise, if you let me know the number on your seal (if possible) or the diameter of your spindle (to the thousandths of...
  view full answer...


• Replacement Threaded Hitch Bolt for a Thule DoubleTrack Bike Rack
• The threaded hitch bolt you will need for your Thule DoubleTrack TH990XT is # TH62RE. The nuts inside the shank though are not available. Nor is the shank itself. But you could either use the new bolt or a tap and die set to cut new threads in the nuts.
  view full answer...


• Need 3 Inch Center-Detented U-Bolts for Older Cargo Box
• Thank you for providing the photo and width dimension of the u-bolt for which you are seeking a replacement. If you can provide us with the make and model of your cargo box, we can research availability of exact replacement parts. We do not currently have any u-bolts with a center detent as shown in the photo. However, I can recommend some multi-purpose replacement u-bolts that may work for you even though mounting a cargo box is not necessarily their intended purpose. Part # CE15502A...
  view full answer...


• Parts Used To Create The Square Pipe Mount Swivel Jack With Footplate
• If you are looking for the parts needed to mount the jack # TJDP-7000S-B, the parts are already included in the packaging. To mount, place female pipe # TJP-FP58 in the proper location for trailer application. Weld on all the way around the female pivot pipe with 3/16" filet weld. Just in case you need it, I have the breakdown of the parts used to create the Square Pipe Mount Swivel Jack w Footplate # TJDP-7000S-B. You will need Replacement Drop Leg with Foot for etrailer and Ram Square,...
  view full answer...