You are correct with the part you will need in order to convert your Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar for Blue Ox Base Plates # RM-677 for use with your Roadmaster direct connect base plates, which are two of the swivel ears:
- Replacement Swivel Ear for Roadmaster Sterling or Nighthawk Tow Bar # RM-910661
Along with the ears, the only other thing you will need the pins, like you asked about, which are the Replacement Base Pins with Chains and Clips for Roadmaster... view full answer...
You can use the Tekonsha Plug-In Wiring Adapter # 3024-P with the Curt Wiring Adapter for Cequent Trailer Brake Controller Wiring Harnesses # C51520. These are needed as Curt Does not have their own adapter for the Curt Venturer Trailer Brake Controller # C74VV to connect to your 2021 Ram 1500 Lonestar. view full answer...
The Locking L-Shaped Handle # 37210895 all come with key 751. So if you purchase three they will all the same 751 key. Each handle comes with 2 keys so you will have a total of six 751 keys.
If you have any further questions please feel free to reach back out to me anytime and I would be more than happy to further assist you. view full answer...
I recommend The Curt Trailer Hitch Receiver # C15005 for your 2022 Ram 1500. I like the Curt trailer hitch over the any other hitch because the Curt Hitch has a concealed cross tube and once installed with give you an off the factory clean look. view full answer...
Yes, The Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers # 325-GH-323 can be used without using the ball mount. You can attach a bike rack or cargo carrier in the Gen Y Hitch.
The Gen Y Hitch has a heavy-duty steel construction, and has a zinc primer and powder coat finish that resists corrosion.
The tongue weight capacity is up to 1,500 pounds, and has a gross towing weight up to 10,000 pounds.
The etrailer Hitch Receiver Lock # e98881 has a hardened steel construction that can... view full answer...
Yes you can absolutely use a fixed hitch like the B&W Companion OEM 5th Wheel Hitch for Ram Towing Prep Package # BWRVK3600 with your 2020 Ram 2500.
You will need to upgrade your pin box to a rotating pin box like the Reese Sidewinder 5th Wheel King Pin with Rotating Turret # RP34FR.
The rotating pin box in conjunction with the contoured nose of your trailer, will provide your truck with the needed clearance to make 90° turns.
Sidewinders are going to be pin box specific, for instance... view full answer...
The SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-307-47 you were looking at are a really nice solution to help fight the sag you're experiencing and they'll also help with road shock to help smooth out your ride a bit. I really like the SumoSprings compared to an air bag since they're maintenance free and you don't need to add a compressor to get the most out of the system.
SumoSprings are progressively load bearing, so they'll get stiffer as more weight is applied on them;... view full answer...
I recommend using the Curt EZr Double Lock Gooseneck Hitch # C60682, which is a confirmed fit on the 2011 Ram 2500 Mega Cab Diesel short bed. This is an under-bed mounting kit with a removable gooseneck ball, so it'll give you the clean truck bed you're looking for when you're not towing.
I've linked a short review video of this hitch for you to check out, as well. view full answer...
A complete flat towing system consists of base plates, a compatible tow bar, safety cables, tow bar wiring/lighting solution, supplemental braking (required by law in most states and provinces) and possibly a high/low adapter.
For base plates I recommend using the Roadmaster EZ5 kit part # RM-522203-5 which is a confirmed fit on your 2019 Ram 1500 Limited. The most popular compatible tow bar is the Falcon All Terrain # RM-522. This has non-binding arms which makes the setup very easy... view full answer...
No, The Timbren Front Suspension Enhancement System # TUF100 will not fit your 2014 Ram 1500. The Timbren Front Suspension Enhancement System # TDF15004B is the correct system for you.
This system will provide additional support as needed so you always have a smooth, comfortable ride. Using this system will not affect the empty ride of the vehicle. They work independently side-to-side and will act as shock absorbers, taking the brunt of bumps and rough roads.
The springs have a weight... view full answer...
I recommend The Firestone Ride-Rite Air Helper Springs # F2598 over The Timbrens # TDR2500D because they will provide a better support/ride comfort when hauling heavier loads and will also help out better with the squatting of your 2018 Ram 2500.
The Firestones have a load-leveling capacity up to 5,000 pounds and have an adjustable air pressure between 5 psi to 100 psi. Using these airbags will also improve your steering control and braking when you're hauling or towing.
To operate... view full answer...
For The 2022 Ram 2500 Short Bed With Factory Pucks I recommend The Demco Autoslide 5th Wheel Trailer Hitch w/ Slider # DM8550035.I like this slider hitch over the others because when making sharp turns you will not have to get out of your truck and adjust the hitch. It will slide by itself and then when you get the vehicle and trailer straight again it will go to normal. It is also extremely easy to install. You will also need the Rail Adapter # DM6099 which will fit right into your puck... view full answer...
Thank you for the pictures. The pig tail that you have on your 2003 Gulfstream Friendship motorhome is a 4-way flat connector. To connect that to your 2020 Ram 1500, you will use the Roadmaster Universal Hy-Power Diode Wiring Kit # RM-154.
I have listed out some other parts needed below, so you can ensure you have what you need.
Base Plate Kit:
- Roadmaster Direct-Connect Base Plate Kit # RM-522203-5
Tow Bar:
- Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676 (includes... view full answer...
Thanks for the picture. The TorkLift StableLoad Rear Suspension Upgrade w Quick-Disconnects item # TLA7311 aren't going to be of any help to you because your overload spring is already engaged due to the weight in the bed of your Ram 3500. I am guessing your truck bottoms out quite a bit.
I recommend the SuperSprings Custom Suspension Stabilizer and Sway Control Kit item # SSA23. They will reinforce your Ram's rear suspension with extra leaf springs that prevent sagging. This kit is designed... view full answer...
I would be happy to help you and I have a great setup for your 2017 Ram 2500 4WD. I would not recommend the Timbren item # TDR2500D you referenced. Those are rated up to 8500 lbs and will offer a stiff ride when you are not loaded up.
For your rear axle, I recommend the SumoSprings Rebel Custom Helper Springs item # SS27GR. These helper springs are a 2-piece system that connects at top and bottom and provides unlimited suspension travel and movement for a smooth, comfortable ride. The... view full answer...
If you're looking to help the suspension on your 2022 Ram 1500 absorb road shocks better you can for sure install a set of aftermarket jounce bumpers, like the SumoSprings Solo Custom Helper Springs # SSR-307-40. I like these springs over the others because they provide one of the smoothest rides possible and will work great when carrying heavy cargo or towing a larger trailer. The springs have a simple, no-drill installation.
If you have any further questions please feel free to reach... view full answer...
The Yakima BedRock HD Bars # Y01160-59 you referenced have a 300-lbs total capacity, not per bar; additionally it should be noted that when used for off road applications you'll be limited to 180-lbs total. The good thing about most crossbar mounted tent systems is that they're going to have a ladder system that will also support a lot of the weight, so you shouldn't have too much of an issue as long as you're under the weight limit of the tent.
The issue is that if you've got a BAKFlip... view full answer...
The etrailer Base Plate Kit # e98945 is an excellent option for your 2021 Ram 1500 Classic. I really like the look of it once installed and it's one of the easier systems when you're talking about connecting/disconnecting the tow bar.
For a tow bar I highly recommend the etrailer XHD Non-Binding Tow Bar # e94ZR because it has that non-binding feature and it has a higher weight capacity at 10,500 lbs so you'll have a nice safety margin between that and what your truck weighs in at so you... view full answer...
For your 2021 Jeep Wrangler Sahara, you'll need:
-A Base plate
- A set of tow bars
- A braking system
- Tow bar wiring
- A high-low adapter
For a base plate I recommend the Romadmaster Direct-Connect Base Plate # RM-521453-5. This base plate kit is custom made to fit your vehicle, has a simple no-drill installation, and provide a clean look when not in use.
Next is a set of tow bars. I recommend the Roadmaster Falcon All-Terrain # RM-522. This tow bar will directly connect to your... view full answer...
The plug and play harness for your 2021 Dodge Ram 1500 Classic is item # 331-TPH-020. This harness will connect to your Redarc Liberty Brake Controller item # RED44FR and give you the port that plugs directly into your Dodge truck underneath the dash. view full answer...
Go To Results