I can definitely help you out! I went ahead and confirmed with the instructional manual of the Thule Fit Kit - 3128 # THKIT3128 that these mount directly into the fixed mounting points on your 2022 Mitsubishi Outlander (Sport models only). There are no door jamb clips included in this setup. I went ahead and attached photos from the instructions for your convenience. It is also important to note that the # THKIT3128 is only confirmed to fit your fixed mounting points if you purchased your... view full answer...
The Curt # C13163 will work great for you. The hitch comes with bolts for installation. You may want the Nylon Tube Brush - 1/2" # 814092 and some penetrating lubricant to clean your factory frame weld nuts.
If you will be towing with this hitch, then I recommend wiring harness # 118482 which will install behind your tail lights and draw power directly from your vehicle battery to protect your vehicle electronics. I've attached an article to help with routing that power wire.
Finally... view full answer...
I can confirm that the Curt # C13163 is a confirmed fit on your 2018 Mitsubishi Outlander SE (all models except the PHEV) and as long as you're using a bike rack that is designed to fit in a 2" hitch there won't be any modifications/adjustments that would need to be done on the hitch. If for some reason there was something wrong with the hitch then, yes, you would be able to return it without issue.
We do not carry the Allen Sports rack you mentioned, and it would fit on this hitch, but... view full answer...
Yes. the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11449 is the correct fit for your 2018 Mitsubishi Mirage G4. I've attached a photo for reference, but this hitch is confirmed to fit 2017 to 2019 Mirage G4 models. If you will be using the hitch for a bike rack or other accessory, use of the stabilization strap # 18050 is required so you don't void the manufacturer warranty.
Class I hitches will limit you to Class I rated bike racks, so I have also linked a page... view full answer...
We do have a hitch and 4-way wiring to fit your 2023 Mitsubishi Outlander PHEV.
The Curt Trailer Hitch Receiver # C86FV will fit your PHEV version of the Outlander and provide you with a 2" trailer hitch receiver. You can then use the T-One Vehicle Wiring Harness # TK46VR to provide the 4 way plug.
The etrailer Ball Mount Kit # 989900 can be added to round out a tow package. view full answer...
The Rhino Rack Roof Rack part # RRVA137S-2, # RRRLKVA is listed as a fit for your 2014 Mitsubishi Outlander with the fit kit part # DK290 which comes with the threaded portion you are missing to mount it to your vehicle roof. view full answer...
Thank you for the photo of your older Yakima hitch bike rack for which you want to confirm the fit of replacement shank/tongue assembly # 8880580.
Yakima confirmed the fit of this part on your rack. You may also need Hitch Bolt # 8890200 to secure the shank to your hitch.
I also went to our warehouse and took a number of measurements that should give you what you need to verify that this part will work on your rack. The linked photo indicates the hole diameters, hole spacing and inside... view full answer...
The Curt Class 3 Trailer Hitch, # 13223, will fit on your 2002 Mitsubishi Montero Sport. It is a Class 3 2-inch hitch with a towing weight capacity of 5,000 lbs. and a tongue weight capacity of 500 lbs.
For towing you will need a ball mount, # C45010, and hitch ball # 19260 (1-7/8 inch diameter), # 19247 (2 inch diameter), or # 63853 (2-5/16 inch diameter).
You will want to check the owner's manual or with the dealer for the gross towing weight capacity of your 2002 Mitsubishi Montero... view full answer...
The part you referenced, the Thule Passage 2 Bike Trunk-Mount Carrier # TH910XT, will fit the 2002 Mitsubishi Mirage LS 2-door coupe model. I've linked at right a video showing this rack's installation.
This rack features Thule's patented Fit Dial adjustment system that ensures a perfect fit on your Mirage. It is protected by Thule's limited lifetime warranty. view full answer...
The Thuule Passage 3 # TH911XT is a trunk mounted 3-bike rack that is designed to fit your 2000 Mitsubishi Galant. It has cushioned anti-sway cradles and is designed to work with most spoilers.
The Saris Guardian 3 # SAR43FR is not a fit for your vehicle.
If you plan on transporting any alternative frames bikes, like many women's bikes are, then you will need to use an adapter bar like # UB01 for them to mount properly.
I have linked both products to this page for your purchasing convenienc... view full answer...
I called the manufacture of the Rhino Rack Nautic 581 Rear Loading Kayak Carrier part # RR581 and they told me that it would probably work with your Malibu X-13 kayak but would not be the best way to carry the kayak due to the shape of the hull. The best way to carry this kayak would involve a very simple crossbar pad like Rhino-Rack SUP and Surfboard Pads part # RRRWP05 along with tie-downs like the Rhino-Rack Bonnet Tie-Down Strap with Anchor part # RRRBAS1-2.
The hull of the kayak where... view full answer...
I do have a hitch adapter that allows you to use the Curt Class I receiver hitch part # C11394 with the 2" bike rack. The Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver part # HTAD will fit into the Class I hitch and give you a 2" opening to fit the bike rack however it does cut the tongue weight rating of your hitch in half. The new tongue weight capacity rating of the Curt Class I with the use of the adapter is 100 lbs. If the weight of your bike rack and bikes does not exceed 100... view full answer...
Great question. Some hitch installs can interfere with the spare tire, but this isn't the case with your vehicle.
The 2012 Mitsubishi Outlander Sport has the spare tire stored in a compartment under the floor of the cargo area, so it will not interfere with the installation of a trailer hitch. I've provided a photo of the underside of the vehicle with the hitch installed.
I've linked you to an installation video that'll show you exactly where the hitch sits under the vehicle. view full answer...
With a Class I trailer hitch on your 2006 Mitsubishi Eclipse, you should only use the ball mount that is recommended for use with the trailer hitch. Another problem is that the ball mount that you have referenced is a Class II accessory. Class II items are designed so that they will not fit in a Class I trailer hitch.
You could use Sportframe Drawbar, # 3592, which will give you a 2-1/8 inch rise or # C45016, which will give you a 2-5/8 inch rise. view full answer...
The Curt Trailer Hitch Receiver part # C87WR is a confirmed fit for a 2023 Mitsubishi Outlander SE AWD. This is an excellent bolt-on option that provides you with a class III capacity and 2" opening which is good for use with bike racks and cargo carriers or towing if needed. It features a simple bolt-on install.
Please note, if you are towing you'll also need a few other items like the T-One Vehicle Wiring Harness part # TK46VR and Curt Towing Starter Kit part # C45534. view full answer...
I can only confirm that the replacement rubber strip, # TH853354407, is a fit for Thule Rapid Aero crossbars. If the bars on your 2011 Mitsubishi Outlander Sport happen to be made by Thule then it is possible this strip will fit. view full answer...
I have the perfect trailer hitch receiver for you. In order to install a hitch on your 2004 Mitsubishi Lancer Sportback wagon. You will want the Curt Trailer Hitch Receiver part # C11476 as this is the only hitch receiver option available for your vehicle. This hitch receiver is a complete bolt-on installation that includes everything needed to install the unit. Please regard that this hitch receiver does not fit the Evolution and Ralliart models. view full answer...
There are roof racks for both of your cars that will work with the Thule Hullavator # TH898, but both of your Mitsubishi's will require their own roof rack. The reason for that is they require different parts to install so you can either get a separate rack for both vehicles, or choose the one vehicle you use the most and put the rack on that car.
I'll list the racks that fit both cars for you.
- 2017 Mitsubishi Outlander (with Naked Roof): Rhino-Rack Vortex Aero Crossbars # RRVA137B-2,... view full answer...
I did some research on the Dorman Autograde wheel nut lock you mentioned and found that the sides of the nut are smooth to prevent the wheel lock from being removed with conventional tools.
You will want to attach the Thule lug nut adapter to one of the remaining standard lug nuts, with 6 wrench flats, that hold the wheel on your vehicle. Only one standard lug nut is required for attachment of the K-Summit tire chains.
I posted a video showing these chains being installed that should... view full answer...
Go To Results