The Rhino Rack Roof Rack part # RRVA137S-2, # RRRLKVA is listed as a fit for your 2014 Mitsubishi Outlander with the fit kit part # DK290 which comes with the threaded portion you are missing to mount it to your vehicle roof. view full answer...
Your pictures did attach and it does look like you do have the right connectors on your 2011 Mitsubishi Outlander for trailer wiring harness # 118518 or # C56102. I have linked installation instructions and a video showing installation on a 2007 model which will be the same as your 2011. view full answer...
The Tow Ready Custom Fit Vehicle Wiring, # 118518, for the 2007 Mitsubishi Outlander is a powered converter. It draws power for the trailer lights from the vehicle battery and not from the tail lights. This harness connects to some pre-wired components on the vehicle which does not affect the tail lights on the vehicle so it will not produce excessive draw on vehicle LED tail lights and it will work fine if the trailer has LED, or incandescent tail lights. I have included a link to the... view full answer...
The AirBedz XUV Air Mattress with Built-In Rechargeable Battery Air Pump part # 341031 fits all models of the Mitsubishi Outlander. The dimensions of the bed inflated are 66" long by 52" wide by 10" deep if you would like to compare that measurement to the space that you have just to be sure. view full answer...
We have a Curt hitch that fits your 2019 Mitsubishi Outlander SE with the part # C13398 but the part number you referenced only fits the Outlander Sport models. view full answer...
the cargo mat # WT40360 for the 2008 Mitsubishi Outlander is designed to fit just the cargo area of the vehicle not including the area with the seat folded down.
For a cargo mat that will fit from the 2nd row back (fits over 3rd row when folded down) we have the Covercraft area mat # CC76207625. view full answer...
When I reached out to my contacts at Curt they confirmed that the Curt Trailer Hitch Receiver # C13163 will not fit the 2015 Mitsubishi Outlander PHEV model. They had no trailer hitches that are confirmed to fit the PHEV model of the Mitsubishi Outlander.
The best way to carry your bike racks on your 2015 Mitsubishi Outlander is to use a truck mounted bike rack. Our Saris Bones EX 2 Bike Rack - Adjustable Arms - Trunk Mount # SAR83FR is one of our most reliable and dependable racks. If... view full answer...
The T-One Vehicle Wiring Harness # 118277 is only compatible for the 2016-2020 Mitsubishi Outlander with factory tow package. We do have the Curt T-Connector Vehicle Wiring Harness # C43WR which is designed for vehicles without a factory tow package but can also work on vehicles with the factory tow package but will not use the factory wiring. If you have the PHEV model you will need the Kit # C59496.
If you wish to still use the factory tow package wiring you will need to order the components... view full answer...
The maximum tongue weight for the CURT Class II 1-1/4 Inch Hitch, part # 12293, on your 2006 Mitsubishi Outlander is 300 lbs. With the total weight of the scooter and the power lift at 208 lbs, it will work as far as weight capacity.
It is required by the manufacturer (CURT) to use a stabilizing strap like the CURT Strap with Cambuckle, part # 18050, to stabilize any non-trailer load on your CURT hitch. This strap attaches to your vehicle and to your hitch accessory, like the power lift,... view full answer...
That is an excellent question and the answer is that your 2014 Mitsubishi Outlander will need to use the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56189 with the Submersible, Under 80" Trailer Light Kit # TL5RK due to the amperage draw you referenced.
The Curt kit has a max amperage of 3 amps per circuit, which will be needed for the 2.5 amps of the trailer light kit; the T-One Vehicle Wiring Harness # 118482 has a 2.1 amp capacity, as you noted, and... view full answer...
Yes, you will absolutely be able to carry a 4-bike rack on your 2022 Mitsubishi Outlander with the Curt hitch that fits, which is the following part number:
- Curt Trailer Hitch Receiver # C87WR
The 525 lb tongue weight of the # C87WR is enough to handle any 4-bike rack and its bikes, even the ones that weigh the most and have the most capacity.
For example, the heaviest you can get is the 291-1/2 lb total (91-1/2 lbs for the rack and 50 lbs per-bike) of the Hollywood Racks Sport Rider... view full answer...
Your photo shows that your 2015 Outlander has the roof setup with flush rails. We do not have a Rola roof rack for this application but we do that others that will work great.
For weight capacity, appearance and value I really like the Rhino-Rack SRB Vortex Aero system made of parts # RRVA126B-2 and # RRSX031. This black aerodynamic rack has a 165-lb capacity on your Outlander and provides quieter performance than all other bar shapes. Please check out the linked video to see more.
The... view full answer...
Thank you for the photo of your older Yakima hitch bike rack for which you want to confirm the fit of replacement shank/tongue assembly # 8880580.
Yakima confirmed the fit of this part on your rack. You may also need Hitch Bolt # 8890200 to secure the shank to your hitch.
I also went to our warehouse and took a number of measurements that should give you what you need to verify that this part will work on your rack. The linked photo indicates the hole diameters, hole spacing and inside... view full answer...
Yes, the Antenna Mounting Bracket for Rhino Rack-Crossbars and Platforms # RR43196 will fit into the channels of the Thule WingBar Evo Crossbars # TH711200.
This antenna mounting bracket is meant to fit most crossbars with top channels, along with Rhino-Rack Pioneer platforms. view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13163 excludes the PHEV. However, there is a 2018 Mitsubishi Outlander PHEV fit and it is # C13398. This will work well for bike racks and other accessories.
If you will be towing, I recommend the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT that will not require any splicing into your vehicle wiring. The zero contact interface sensors will work well to... view full answer...
The Curt Class III Round Tube Receiver Hitch # C13398 referenced in your question is indeed confirmed to fit your 2018 Mitsubishi Outlander PHEV. From time to time hitch fits will be updated by the manufacturer so we do appreciate you making us aware of this discrepancy.
This is a really nice Class III hitch that will install on your vehicle using existing holes in the frame for a no-drill installation and it is made right here in the USA. It features a 3,500 pound towing weight capacity... view full answer...
The shipping weight of the Curt hitch is 43 pounds. The actual hitch will weigh a few pounds less.
For wiring I recommend the # 118482 because, over time this harness has proven to be more durable and reliable than the others offered. view full answer...
Yes it will, the 2-Piece Polypropylene Trailer Vent # WHMAV2-WAVT2 that you referenced would work on a 2 inch thick wall. You would just need to cut a 3 inch diameter circle hole in that wall and attach either side of the # WHMAV2-WAVT2 and it would function just fine. view full answer...
The Rightline Gear Sport 3 Rooftop Cargo Bag, # RL100S30, is designed to fit on vehicles with or without any type of roof rack so it will work on your 2012 Mitsubishi Outlander. The bag measures 38 inches by 34 inches by 16 inches giving you 12 cubic feet of storage space so it will fit nicely on the roof of your Outlander.
I also recommend protective pad # RL100650 to help protect the roof and keep the bag from sliding. Another useful item is wheel step # HE4040 which makes it easier... view full answer...