We do have solutions for both of these vehicles that are going to be custom fit and won't require any drilling.
For your 2011 Ford Fusion I recommend using the Curt # C11390 and for your 2015 Honda Civic you'll want to use the Curt # C11391; Curt hitches generally have a much thicker powder coating on them, so they're going to stand up to the rigors of the road a little bit better and won't be as likely to get nicks in the coating that might lead to corrosion issues. These are both custom... view full answer...
If you need a wheel with capabilities of holding 110 PSI you can get the Provider ST235/85R16 Radial Tire w 16" Viking Aluminum Wheel Combo # A16RG8BMMFL. This wheel and tire are rated for 4,400 lbs at 110 psi. view full answer...
Thank you for all of the information about the wiring you are using for flat towing your 2017 Ford Fusion. If you are using the Curt 2-To-3-Wire Tail Light Converter # C56196 in conjunction with a wiring kit like the Tow Ready # TR118821 it should work properly to isolate the 3rd brake light signal but you need to make sure that you are connecting the right and left turn wires to something on the output side. A common misconception is that you can just cap those wires off but when I've... view full answer...
The Roadmaster XL Base Plate Kit, # 4411-1, is just the first piece of the puzzle to flat tow your 2008 Ford Fusion. Please note that this base plate kit will only work if you have a manual transmission. If you have an automatic, skip to the end. If you do have a manual transmission, there are several more pieces to the puzzle but do not worry, I will help you find the edges.
This base plate kit is compatible with tow bars that accept the XL series. I recommend the RoadMaster Falcon 2... view full answer...
Yes, the Curt trailer wiring harness part # C56351 that you referenced is a confirmed fit for your 2017 Ford Fusion Energi Hybrid model. These come with easy to follow install instructions that I have attached to this page for you to check out.
I also attached a link to an install video for this kit that will walk you through the entire process as well. view full answer...
The Thule Passage # TH910XT will fit a 2007 Ford Fusion without a spoiler, but it's not confirmed to work with most spoilers. That being said, the Thule Gateway Pro 2 # TH88VR is approved to fit most factory spoilers. Check out my review video to learn more! view full answer...
The Tow Ready Wiring Harness part # C56302 is trailer wiring that has been confirmed as a fit for your 2016 Ford Fusion Titanium so I would recommend it for you.
If you need a trailer hitch the Curt part # C56351 has been confirmed as a fit. For a 1-7/8 inch ball mount the part # C45561 would work or the # C45562 for a 2 inch ball. view full answer...
I can absolutely confirm for you that the EcoHitch Hidden Trailer Hitch Receiver # 306-X7239 will fit your 2019 Ford Fusion Titanium.
This has a 2 inch receiver like you are needing and the receiver is the only part showing so your Fusion will maintain its aesthetic.
I can't tell you why others are not selling this other than they may not have it available, but it will fit, as you can see from the accompanying photo of a Ford Fusion Titanium with the EcoHitch Hidden Trailer Hitch Receiver... view full answer...
On the Rola bike racks that take strap # 59405 there is a simple procedure for replacing the strap. First, if you look at the cradles you will see they are held to the arms by the clamping force provided by a screw and nut. Remove the screw and nut. Then at the end of each arm, on the bottoms, there will be a small screw. Remove this screw. Then all you have to do is slide everything off the end of the arm.
For each cradle assembly, the large strap, the one you are replacing, goes on... view full answer...
All of the 4-way connectors offered for your 2020 Ford Fusion SE 4 Cylinder 2.0L Turbo do have a powered module that draws power directly from the battery of your vehicle.
The reason for this is it protects your factory wiring from any damage which could be caused by a short in your trailers wiring, and reduces the strain on your factory wiring by not drawing power through it.
Out of all of the harness available for your Fusion I recommend the T-One Vehicle Wiring Harness # 118574 as... view full answer...
Sounds like you are locking for the Rhino-Rack Secure Core Endcaps for Vortex Aero Crossbars - Plastic Cores - QTY 4 # RRVA-SEC4.
If you want the version that has metal lock cores, we have Rhino-Rack Locking Endcaps - Metal Cores - QTY 4 # RRVA-LEC4. Both come with their respective keys. view full answer...
According to Curt Manufacturing, their # C12091 fits all models of the Ford Fusion, with the exception of the Sport model.
If you'll be towing with your trailer, you'll need a trailer wiring harness like part # 118574, a ball mount like
# C45016 and a trailer ball. For a trailer ball, use # A-80 for a 1-7/8 inch or # A-82 for a 2 inch ball.
I've linked to an install video for the hitch and the trailer wiring harness. view full answer...
To flat tow your 2016 Ford Fusion Energi you'll need the following components:
Baseplate: Roadmaster Direct-Connect Base Plate Kit # RM-524437-5.
Tow Bar: etrailer SD Non-Binding Tow Bar # e74ZR. This tow bar comes with safety cables included and has an adjustable head and hank to help keep the tow bar level between the motorhome and Fusion.
Tow Bar Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This kit will come with everything you need to display... view full answer...
For a trailer hitch for your 2014 Ford Fusion for carrying a bike rack you would want the Draw Tite hitch part # 24897 which is a confirmed fit and does not require the use of a stabilizer strap like the Curt hitch you mentioned does. This has been confirmed as a fit for your Fusion Hybrid Titanium as well.
The Rola TX-102 you mentioned would fit this hitch well but has been discontinued.
The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber... view full answer...
I took a look at the owner's manual for a 2013 Ford Fusion and it states that a front-wheel drive Fusion can be towed using a tow dolly with the front wheels off the ground, but an all-wheel drive model cannot be flat towed or towed on a dolly (it would require its own trailer).
We do have tow dollies that you can use for your '13 Fusion and I highly recommend the Demco Kar Kaddy # DM9713045. view full answer...
We have a similar bike rack solution that would fold up and clear the rear bumper of your 2017 Ford Fusion but the Curt # C18085 would not. Instead the Hollywood Racks Trail Rider part # HR200Z would be your best option. view full answer...
The Performance Tools 2.5 Watt Solar Battery Charger # PTW2997 includes a 9-foot cord and both a cigarette lighter style and a spring clip style extension that plug in with 2-pole connectors like those on part # 9651P. If your battery tender's cord uses this type of connector then it will plug in and function but you'll want to keep in mind that the added 25-feet of wiring will cause some voltage drop.
If you happen to have a set of heavy gauge jumper cables around, something like the... view full answer...
The two should fit no problem on the crossbars you have.
The Thule Wingbar Evo crossbars # TH711500 that you have are 60 inches long and the Thule SnowPack Extender Ski and Snowboard Carrier part # TH7325 would take up around 30 inches of bars space give or take. Since the attachment brackets are several inches towards the middle of the rack and are adjustable it's hard to give an exact amount of bar space they take up.
The Thule Pulse # TH615 is 33 inches wide and can also hang over... view full answer...
Your best solution would be the Draw-Tite part #24897 that you also referenced. This hitch will only require trimming of the rear panel and would not require you to use a stabilizer strap like the Curt hitch part # C12091 would.
This hitch would work great with the Swagman XTC2 bike rack part # S64670. I attached a review video for this rack for you to check out. view full answer...
I checked with several of our prominent bike rack makers - Thule, Yakima and Hollywood Racks - and none offers any trunk-mount bike racks for the 2014 Ford Fusion. When this occurs with a vehicle it generally means that the trunk's sheet metal is too delicate to handle the weight of a loaded bike rack and/or that there is a feature, such as a rear spoiler, that prevents a proper fit.
We can offer you an option, however. A Class II trailer hitch such as the Curt # C12091 which bolts on... view full answer...
Go To Results