The Kuat Sherpa 2.0 Platform Rack # SH12P that you referenced is an excellent choice. This is an extremely well made rack that features larger front-wheel cradles to allow for easier loading, pivoting rear cradles that let you load different size bikes, a convenient foot pedal that lets you tilt the rack back for rear cargo access, and integrated locks to help protect your investment. In addition to the these premium functions I also just think this rack has a really sleek appearance that... view full answer...
There are bike racks specifically rated for use behind a motorhome, and there are bike racks specifically designed to be used while towing (towing bike racks). However, none of the racks rated for use behind an RV are towing bike racks. But, what you can do is use a trunk mounted bike rack on the 2011 Ford Fusion.
For a 2 bike trunk mounted rack, I recommend the Yakima Fullback 2 # Y02634. This is a quality 2 bike rack with anti-sway cradles that will not brake the bank and it includes locks. view full answer...
There is a Class III Hitch available for your new 2020 Ford Fusion, the EcoHitch Hidden Trailer Hitch Receiver # 306-X7239.
This hitch has a 525lb tongue weight rating and a 3500lb trailer weight rating so it will have a plenty high rating for your light weight 4' x 8' trailer, though you will want to check the towing section of your owner's manual to find your vehicles towing capacity and use the lower rating between the vehicle and hitch.
With this receiver you would be able to use... view full answer...
The serial number of your Sterling tow bar being 607,928 would indicate that the # RM-031-5 would work with it and would be the correct fit. The # RM-031 is for the older version like you mentioned. view full answer...
I have a solution for carrying bikes with your 2013 Ford Fusion, but there are no trunk mounted options that have been confirmed to fit your vehicle.
Instead I would recommend a hitch and hitch mounted bike rack. Hitches provide basically the best attachment point for bike racks. They are more secure than a trunk option and don't touch any painted surfaces. And they don't affect gas mileage or require lifting a heavy bike up on the roof of a vehicle like a roof option.
For a hitch for... view full answer...
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24865. This hitch is 5-1/2 inches from the outermost part of the bumper to the center of the itch pin hole. The Curt Hitch # C11390 has a measurement from the outermost bumper of 5 inches to the center of the hitch pin hole.
For your ball mount, I recommend the Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs # C45521 along with a 1-7/8 inch hitch ball like # A-80 or a 2 inch ball... view full answer...
Generally speaking, if a vehicle has a rear spoiler, it will be difficult to mount a trunk mounted bike rack. However, if no part of the bike rack touches the spoiler and the straps can pass underneath or over the spoiler without touching it, then you can use a trunk mount bike rack. Our Fit Guide does not show a fit for your vehicle for any trunk mounted bike rack.
If you were willing to add a hitch to you car, you could use the Draw-Tite Class I Sport Fram receiver hitch #24865. You... view full answer...
If you need a wheel with capabilities of holding 110 PSI you can get the Provider ST235/85R16 Radial Tire w 16" Viking Aluminum Wheel Combo # A16RG8BMMFL. This wheel and tire are rated for 4,400 lbs at 110 psi. view full answer...
There is not always a speaker behind the rear bumper on the Ford Fusion, so you will need to check under the bumper to see if your particular 2013 Ford Fusion has the speaker or not.
If you do you will need the # 18136 to make a bracket to move it out of the way of the EcoHitch Trailer Hitch Receiver # 306-X7239. You will also need to source two nuts and bolts to secure the speaker to the bracket.
You can absolutely use a ball mount upside down to get the correct rise needed to tow your... view full answer...
You can angle two kayak carriers towards each other to carry them on the roof at the same time. You'll need a roof rack to mount the carriers on.
The Yakima JayLow, part # Y04073 is a great example of a universally compatible kayak carrier that can do this.
If you don't already have a roof rack, I recommend adding the Rhino Rack Vortex kit, consisting of:
Rhino Rack Vortex Crossbars, part # RRVA126B-2
Rhino-Rack 2500 Series Vortex Legs, part # RRRLKVA
Rhino-Rack DK Fit Kit for Vortex... view full answer...
If you're planning on using a bike rack you already own that's only compatible with a Class III hitch with a 2 inch receiver, the EcoHitch # 306-X7239 you'd looked at would be an excellent choice (unless your Fusion is a Sport model). The thing that sets the EcoHitch model apart is the fact that the hitch crossbar will be concealed behind the rear bumper, and it's the only hitch available for your Fusion that uses the 2 inch receiver opening.
However, if your bike rack can use a 1-1/4... view full answer...
The Blue Ox Patriot # BLU37TR would draw too much power for the 12 volt accessory circuit of the tow vehicle's trailer wiring. You'd have to run it to the battery of the towed vehicle. To keep the towed vehicle's battery topped off though we have the Roadmaster charge kit # RM-156-25 which will work great. view full answer...
The Draw Tite Hitch part # 24865 has the towing capacities of 200 lbs tongue weight and 2,000 lbs total trailer weight. Whether or not your 4-cylinder 2011 Ford Fusion has the same capacities is why you need to consult the owners manual of your vehicle.
Whichever component in your towing setup has the lowest towing capacity is what dictates the towing capacity. I attached an install video for this hitch for you to check out as well.
For trailer wiring you would want the part # 118422.
For... view full answer...
Since you are concerned about the finish on your 2011 Ford Fusion I would recommend a trailer hitch and hitch mounted bike rack for carrying your bikes. The Draw-Tite Class I Sport Frame Receiver Hitch would be a great choice and installs easily with no modifications to your vehicle. We have an installation video for this hitch, see link, and it is the hitch most of our customers who own the 2011 Ford Fusion select.
Next you will need a bike rack. It is not recommended to carry more than... view full answer...
The strongest roof rack we carry for your 2016 Ford Fusion maxes out at 125 pounds so it will not be the best option for your 2016 Ford Fusion and two 68 pound kayaks. The components are limited by the capacity of your vehicle as the individual parts are rated higher. I do have a solution for you but none of the available roof racks for your Fusion are rated high enough.
The only remaining option is to use what is called a roof rack on wheels. This is basically a trailer with a roof rack... view full answer...
The perfect bike rack we have for your Radrover E-Bike is the Thule EasyFold part # TH903202 which has a max wheelbase of 48 inches and a capacity of 65 lbs. This rack can also fit Class I hitches like what are available for your 2012 Ford Fusion like the Draw Tite # 24865. view full answer...
There is a way to carry bikes on your 2014 Ford Fusion but a trunk mount carrier cannot be used because the vehicle is unable to support the weight at the point where a trunk mount carrier would attach.
The safest way to carry bikes on a vehicle is with a trailer hitch and hitch mount bike rack. It is also lest costly then going with a roof rack and it is easier to load and unload bikes compared to a roof rack.
If you need to carry more than 2 bikes I recommend Curt Class II trailer... view full answer...
Using a trailer hitch is going to be the best and safest way to carry bikes on your 2013 Ford Fusion. For trailer hitches there are Class I options and 1 Class II option. If you want to carry more than 2 bikes you will need to go with the Class II hitch, # C12091. I have linked a video showing how the hitch installs for you.
With the hitch installed the Thule Hitching Post Pro bike carrier, # TH934XTR, is an excellent choice. I have included a link to a video review of this carrier on... view full answer...
For a hitch for your 2014 Ford Fusion Titanium for carrying a bike rack you would want the part # 24897 which is a confirmed fit, does not require a safety strap like Curt hitches do, and would be compatible with the Thule DoubleTrack TH990XT. view full answer...
Go To Results