Yes, the Rear View Safety Backup Camera System item # RVS-778718N will fit your 2013 Dodge 1500 Tradesman. This is a universal backup camera that has 33 feet of cable. You will have no problems attaching it to your Dodge Ram. I have linked a review video. view full answer...
I have a solution for you, but there is not a package with all of these parts offered so you'll need to get the individual parts. I'm also skeptical that there is room to fit a 7 way trailer plug in the opening left by removing the knockout panel; the 4 way fits without issue, but you'll likely need to find a mounting location below the bumper for the 7 way connector because of its' size.
With that said, you can use the Draw-Tite # DT38MR and it will fit right behind the knockout panel,... view full answer...
It sounds like you are needing a wiring harness on your 2016 Dodge Journey to provide trailer lights. For that you can use the T-One Vehicle Wiring Harness # 118567 if you have Incandescent bulb taillights or the T-One Vehicle Wiring Harness # 118536 if you have LED taillights. This would provide you with a 4-way connector for trailer lights.
If your trailer needs a 7-way connector you can add the Universal Installation Kit for Trailer Brake Controller # ETBC7 which will adapt the above... view full answer...
No, you do not have to have an air tank with a compressor system in order to fill the air bag helper springs on your 2012 Dodge Ram. A system such as # AL25856 would work well for filling the air bags. I have included a link to the compressor options both with and without air tanks. view full answer...
When installing a B&W Turnoverball Gooseneck Customer Installation Kit on your 2003 Dodge Ram Pickup 3500 Short bed The B&W Kit # BWGNRM1313 is the correct one for your vehicle.
This rail kit lets you install your B&W Turnoverball gooseneck trailer hitch # BWGNRC900. (Sold Separately) This kit has a powder coat finish that resists corrosion, and it is made in the USA.
I attached a review video link below. view full answer...
If your 2005 Dodge Dakota came with the factory 7-way you will simply need the Tekonsha Plug-In Wiring Adapter # 3020-P, and Adapter # 331-TPH-017 to connect the Redarc Liberty # RED24FR. This will give you a plug and play connection without having to splice any wiring.
If you do not have the factory wiring we have a 4-Way # 55323, 7-Way # ETBC7 and the Redarc # RED52VR. This will give you all the wiring you need for a hardwire install. view full answer...
Yes. You can use your old Tekonsha Voyager in your truck without any issues. In order to install the Tekonsha Voyager # 39510 on your 2007 Dodge Ram pickup you'll want to use the adapter plug # 20127. This will plug into the brake controller and allow you to hard-wire in your Voyager to your 2007 Dodge Ram.
As long as your truck came equipped with the factory 7 way connector, you can use the # 3020-P to connect to the existing plug in your vehicle to the brake controller. view full answer...
You can use Reese Semi-Custom 5th wheel installation kit # RP30035-386 in your 2013 Dodge Ram 1500 Quad cab to let you use your Reese industry-standard 5th wheel hitch. If you prefer a simplified installation with less drilling you can instead use the custom install kit # RP50142-58. You will not need anything other than a wiring harness # PK11893-11932.
If you want to add custom-fit towing mirrors to your Ram you can use the Longview # LVT-3100C which is a set of both driver- and passenger-side... view full answer...
In order to install your 3-function lights on your 1997 Dodge Ram 3500 that has combined stop/turn wiring you will need a vehicle-to-vehicle taillight converter, part # 118158 from Tow Ready. This converter separates the combined stop/turn functions into separate signals that run on separate wires. This converter will work only on incandescent lights, but not with LEDs.
Your vehicle running/tail light wire will bypass the converter and go directly to the wire on your lights that operates... view full answer...
I confirmed with Draw-Tite that their trailer hitch receiver # 75038 will fit your 1991 Dodge 150. This is a Class III, 2 inch receiver that does require drilling for installation. I've linked a video of the hitch being installed onto a Ford but the process will be the same.
Also if you need a wiring harness # C55317 is the correct harness. This will provide a 4-way trailer connector on the back of your truck.
You'll also need a ball mount and hitch ball if you don't already have... view full answer...
Yes. You can use any standard ball mount with your Replacement Shank for Gen-Y Adjustable Ball Mount - 2" Hitch - 5" Drop/Rise - 16K # 325-GH-503 or you can use the ball mount that typically comes with this system which is available with the Replacement 2-Ball Mount for Gen-Y Adjustable Ball Mounts w/ 2" Receivers - 16,000 lbs # 325-GH-051. This is a ball mount that comes with both 2" and 2-5/16" hitch balls to allow you to tow a variety of trailers as well. view full answer...
We do not, but as long as the new lug hubs use the same bearings as the current hubs you can just swap them out. For instance, if your current hubs used the L44643 bearing you can use both the Trailer Idler Hub Assembly for 2,000-lb Axles # AKIHUB-440-2-G-1K to replace the 5 lug hub # AKIHUB-545-2-G-1K.
You'll just need to also keep in mind that the wheels you currently use won't work since the bolt pattern is different. view full answer...
We do not offer any custom-fit base plates for your 1952 Dodge panel truck but Blue Ox makes a set of heavy-duty bolt on base plates designed to mount to a flat section of bumper, part # BX88230. Since this will be a custom installation you will need to make sure the bumper has the necessary weight capacity for towing the truck. Most bumpers will require reinforcement.
With these installed you can use any Blue OX tow bar, such as their car-mount Acclaim # BX4330 that you referenced. This... view full answer...
There is an adapter for using Blue Ox base plates, # BX1967, with Roadmaster tow bars. You would use # RM-031. Or you could skip the adapter and get matching parts by using the Roadmaster base plates, # 52273-1 that you have referenced.
In addition to the base plates and tow bar you will also need lighting. I recommend the bulb and socket kit, # RM-155, because you will not have to cut into the vehicle wiring for installation.
You will also need safety cables like # RM-643. The coiled... view full answer...
We've got what you're looking for. You'll need the # HA81795-HBC harness. One end plugs into the pigtail exiting the rear of your Hayes 81770 Endeavor brake controller, the other plugs into the factory brake controller connector. The connector is located under the dash, just above where the driver's right knee would be as shown in the provided photo.
I'll link to an install video that you might find helpful. The video shows a different brake controller being installed on a 2016 Ram 1500,... view full answer...
According to the owner's manual, you can flat tow your AWD Durango IF it has the two-speed transfer case. Otherwise, you'll need to trailer it.
If you do have the 2 speed transfer case, you'll need a tow bar, base plates, a taillight wiring harness, safety cables, a supplemental braking system, and a possibly a high/low adapter.
For a tow bar, I'd recommend the Roadmaster Falcon All-Terrain # RM-522. For base plates, use # RM-521449-5 for vehicles with adaptive cruise control. For safety... view full answer...
According to Pop & Lock, the # PAL9772 should work on a Leer 700 truck topper with the existing handle. If for some reason the handle isn't working, you can swap out to a new handle that will work with your Pop & Lock system using the Replacement Handle for Pop & Lock Tonneau and Truck Cap Power Lock - 1-1/8" Hole # PAL9585. view full answer...
The existing wiring harness you have used to connect your Hayes Syncronizer Trailer Brake Controller # HA81725 to your 2007 Dodge Dakota will also work to install this unit in your 2005 Dodge Ram 1500. The harness is part # HA81782-HBC and it plugs in between the hardwired connector at the back of the controller and the connection port under the dash on your Ram 1500.
The Hayes Syncronizer brake controller # HA81725 is a time-delayed type as opposed to a proportional type brake controller.... view full answer...
That we are aware of there isn't a trailer wiring harness present at the rear of a 2001 Dodge Ram Van. However, you could use a circuit tester like our part # PTW2992 and test the circuits of the harness for taillight functions. Check out the video I attached that would show you the basic principle of testing the functions.
Since we do not have a connector that would connect to that harness you could use those circuit in that connector to install a Draw-Tite 4-way part # 18252. Install... view full answer...
The Prodigy, # 90885, brake controller wiring harness for the 2010 Dodge 1500 Ram Truck is the Tekonsha Wire Replacement for Dodge Vehicles, item # 3021-P.
If your brake controller has blunt cut wires at the back then you can use the Universal Brake Control Wiring Adapter, Dodge Ram, item # 20273. view full answer...
Go To Results