The 4 pole wiring harnesses we offer for trailers are pretty consistent when it comes to the wire gauge. The right turn/brake, left turn/brake and running lamp circuit wires are typically 18 gauge and the ground wire is typically 16 gauge. This is pretty much industry standard.
However, the Hopkins Easy-Pull harness, part # HM38136 has a design that will eliminate the typical failure point of a 4 pole trailer harness, which is the point where the harness meets the plug. The plug features... view full answer...
To select replacement electric drum brakes for your tandem axle travel trailer you will want to confirm the axle weight rating, which can be found on the axle itself or on the trailer's main identification sticker. You also want to confirm the brake flange mounting bolt pattern and the size of the hub/drums. The brakes you referenced, part # AKEBRK-35-SA, are for 3500-lb axles with 10 x 2-1/4-inch drums and they use a 4-bolt mounting pattern.
If you want to add electric drum brakes to... view full answer...
The Vehicle to Vehicle Tail Light Converter # C56196 will allow you to separate your stop and turn signals on your 2010 Dodge Challenger. While there is not a diagram with any wire colors, you will be able to find the right wires easily by using the Cordless Circuit Tester # PTW2979.
Please keep in mind it is recommended you use Diodes # 48955 to prevent power feedback.
I have added a link to a video review of the converter for you to check out as well. view full answer...
I spoke with Fulton and parts are no longer available for the Fulton 945. That's a pretty old winch.
For a new similar replacement they suggest # F143100. A 1,500 pound capacity winch that's designed to be used in marine applications. view full answer...
Go To Results