Draw-Tite hitch # 76225 is an excellent choice for a clean installed appearance on your 2018 Dodge Journey. As for the 4-pole connector mount you have two ways to go.
Some towers prefer to keep the 4-pole wiring tucked inside the vehicle except when they are actually pulling their trailer. The wisdom to this is that the 4-pole is then protected from corrosion from moisture and salt, and also from a potential hit from road debris. If you are towing all the time then stowing the 4-pole... view full answer...
The etrailer Trailer Hitch Receiver item # e98845 does not come with a wiring harness. This is a custom fit 2" hitch receiver for a 2013 Dodge Journey.
The wiring harness you will need is determined by what kind of tail lights your Journey has. If you have LED's then you will need the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118536. This custom-fit T-One connector plugs into your vehicle's wiring harness which is located behind the driver's and passenger's-side... view full answer...
If you have longer bars from Yakima, like the 70" JetStream part # Y00427OR the 70" CoreBar # Y00423, then all you need for your 2009 Dodge Journey are the TimberLine Towers # Y33TR. If you happen to have Yakima round bars then you need the adapter # Y03536 as well.
For your Thule bars you will need to use the Evo Raised Rail Feet # TH710401 with the 69" ProBar Evo Crossbars # TH713600 as the aero-style Thule bars have a limited mounting space underneath them and I don't think it will... view full answer...
It sounds like your customer needs their 2014 Dodge Journey set up for towing. Yes, in addition to the # 76225 and a ball mount like the # 989900 they will also need wiring to power the trailer's signal lights.
The correct wiring harness will depend on whether or not they have LED taillights. If they do have LED lights they will need the # 118536. If they have incandescent lights they need the # 118567 instead. Both of these plug in behind the taillights for installation and will provide... view full answer...
Trailer wiring harnesses are not usually included with a hitch since not all trailers have lights. The typical small utility trailer that one might use to get a load of mulch will often not have lights (or trailer brakes, for that matter).
But we can certainly help you with a 4-pole wiring harness for basic trailer lighting functions if you will be towing a trailer with lights.
On your 2017 Dodge Journey the choice of wiring harness depends on the type of tail lights the car has. If... view full answer...
The Universal Installation Kit for Trailer Brake Controller # ETBC7 will connect to the 4-way you already have installed on your 2012 Dodge Journey. It provides you with the wiring you will need to run the power for the charge line as well as feed wire for the brake controller.
I recommend installing the Redarc Tow-Pro Liberty Brake Controller # RED52VR for your Journey. This unit has a small control knob that you can mount on your dash where it is easily accessible. As the knob does... view full answer...
Certainly. I recommend the Draw-Tite trailer hitch receiver, part # 76225. I like that once it's installed you only see the open receiver tube and not the crossbeam. It is a more difficult install and requires you to cut some fascia on your 2015 Dodge Journey. I've linked the video from when we installed it along with the install details for you. If you prefer an eaier install then look at the Curt # C13201. To install the Curt you need to temporarily remove the spare tire and lower... view full answer...
When it comes to installing a trailer wiring harness on your 2017 Dodge Journey there are two options you can choose from:
With Incandescent Bulb Taillights
With LED Taillights
The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56109 that you purchased are for a Dodge Journey with incandescent Bulb Taillights. It sounds like you need the trailer wiring harness for LED Taillights like The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer... view full answer...
The trailer hitch receiver I suggest for your 2017 Dodge Journey is the Draw-Tite # 75648. It's a Class III, 2 inch hitch which will give you more towing capacity and more options for accessories.
If you're going to be towing with the Journey for a 4-way trailer harness you can use # 118536 if it has LED lights. If it has incandescent lights use # 118567. Both install by plugging into connectors behind the tail lights.
You'll also need a ball mount and hitch ball. I've attached link... view full answer...
It sounds like you are needing a wiring harness on your 2016 Dodge Journey to provide trailer lights. For that you can use the T-One Vehicle Wiring Harness # 118567 if you have Incandescent bulb taillights or the T-One Vehicle Wiring Harness # 118536 if you have LED taillights. This would provide you with a 4-way connector for trailer lights.
If your trailer needs a 7-way connector you can add the Universal Installation Kit for Trailer Brake Controller # ETBC7 which will adapt the above... view full answer...
The Thule replacement knob # 753-0073 will work if you have a Thule Apex bike racks7. it also works with Rain Gutter foot packs # TH300, # TH368, # TH369 and # TH387.
If you would like the replacement Thule One-Key System lock core then you can use Thule # TH450200. I have attached a short review video demonstrating how to change the locks out. view full answer...
The closest LED tail light we carry to Bargman # 30-92-002 that you referenced is part # 328-003-81M1 for the passenger's side and # 328-003-81LM1 for the driver's side.
They're fairly close in size but don't have the reverse light circuit like the Bargman lights do. view full answer...
To tow a trailer with your 2009 Dodge Journey SXT you'll need a trailer hitch receiver, a ball mount, hitch ball, pin and clip, and trailer wiring.
The trailer hitch I suggest is the Draw-Tite Max-Frame # 75648 which is a 2 inch, Class III receiver. A 2 inch receiver will have a higher weigh capacity as well as more variety of accessories that can be used. I've attached a video of the hitch being installed for you to take a look at.
The Tekonsha wiring harness # 118474 plugs into the... view full answer...
The Universal Installation Kit for Trailer Brake Controller 7-Way # ETBC7 will with your 2013 Dodge Journey. This kit includes everything you need to install an electric trailer brake controller and 7-way connector.
First you need a 4-way, which is required to install the # ETBC7; part # 118536 is recommended if you have LED taillights and if you have incandescent bulb taillights # 118567 is recommended. These 4-way connectors provide your four way flat trailer connector by plugging in... view full answer...
To hardwire a Prodigy P2 brake controller # 90885 in your 2016 Dodge Journey you will need to make the 12V input power connection (for the black wire) at the positive battery post, going through a circuit breaker like 20-amp # PK54520. This value circuit breaker will be fine for trailers having up to 4 brake assemblies but if your trailer has more than 4 braked wheels then instead use a higher-value breaker # 38630 which is rated for 30-amps.
The other wires from the P2 (red, white and... view full answer...
We've got what you're looking for. You'll need the # HA81795-HBC harness. One end plugs into the pigtail exiting the rear of your Hayes 81770 Endeavor brake controller, the other plugs into the factory brake controller connector. The connector is located under the dash, just above where the driver's right knee would be as shown in the provided photo.
I'll link to an install video that you might find helpful. The video shows a different brake controller being installed on a 2016 Ram 1500,... view full answer...
For your 2018 Dodge Journey GT you will need either the Kit # 118567 if you have incandescent tail light or the Kit # 118536 if you have LED tail lights. This will require connecting in line of your tail lights and running a power wire to the battery. The additional wiring is needed as there is not wiring already ran for a trailer connection on your Journey.
I recommend using the etrailer Trailer Hitch Receiver # e98845 for connecting to your trailer. This gives you a 2" receiver with... view full answer...
Mounting brackets for 4-Way flat trailer wiring connectors are more or less universal so there isnt a vehicle specific one for a 2014 Dodge Journey. You will need mounting brackets # 18144 with either the short extension, # 18140 or long extension # C57202. I have included a link to a video showing a typical installation for you. view full answer...
We have everything you will need. First let's start with a hitch, for that I would recommend the Curt Trailer hitch part # C13201 that you said you were interested in. This is a Class III hitch with a 2 inch opening that would have more than enough capacity for your trailer.
Now for wiring you will want to start with a 4-way, for that you would need the Trailer Wiring Kit from Curt part # C56109. This will give you a 4-way. Now since you need to install a brake controller since you said... view full answer...
Go To Results