Expert Answers about Dodge Sprinter
- Parts to Flip 2,000 lb Dexter Trailer Axle With Idler Hubs
- There is a way for you to flip the axles of the Dexter Trailer Axle with Idler Hubs # 20545I-EZ-72-15 you asked about, though the over/under kit you mentioned won't work because this axle is too small in diameter. So while there isn't a similar kit for the 1-3/4" axle tube of the Dexter axle, you can put together the pieces needed, which are the following:
- U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles # APUBR-10
- Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4"...
view full answer... - Trailer Brake Controller And Wiring For A 2008 Dodge Sprinter 2500
- For your 2008 Dodge Sprinter 2500, you will need to purchase the Universal Installation Kit for Trailer Brake Controller # ETBC7 as well as a brake controller.
I recommend the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR with the wiring adapter # 331-TPH-017. This brake controller will work with trailers up to 3 axles, and is designed to work with electric-over-hydraulic trailer brakes.
Additionally when # RED44FR is installed it keeps a much lower profile than your standard...
view full answer... - Installing a Brake Controller and 7-Way on a 2007 Dodge Sprinter RV
- Since your 2007 RV on the Sprinter chassis already has a trailer connector but it does not match either trailer, using the 4 and 7 way installation kit # ETBC7 would be a good idea. This will also provide you with the accessories needed to install the P2 brake controller # 90885.
If that green wire does go back to the trailer connector then you will not have to run the blue wire from the connector to the brake controller. You can test it by applying 12 volt power to the wire using a separate...
view full answer... - Brake Controller & 7-Way Installation on 2007 Dodge Sprinter 3500 Chassis
- For a 6-way round pin to 7-way blade pin wiring adapter you can use part # 47435 from Hopkins.
view full answer... - Recommended Bike Carrier and Cargo Carrier Combo for 2006 Dodge Sprinter
- It sounds like you're probably talking about something like the Hollywood Racks Sport Rider SE2 Platform Bike Rack w/ Cargo Carrier # HR1450Z-85 which is a 2 bike carrier with a cargo carrier built in. This is a great multi-function carrier that will allow you to carry both bikes and cargo on the back of your 2006 Dodge Sprinter. If you would ever need to carry 4 bikes, I recommend instead going with the # HR1400Z-85 since it comes with a rear 2 bike platform that is removable and can be...
view full answer... - Suspension Enhancement Recommendation For A 2006 Dodge Sprinter 3500
- For your 2006 Dodge Sprinter 3500 I recommend the SumoSprings Solo Custom Helper Springs # SSR-338-54. This kit has a 1,400lbs capacity and will help driver control and comfort; This product measures in at 11" x 8" x 5".
Unfortunately, we do not have any air bag options for your 2006 Dodge Sprinter 3500.
view full answer... - How to Wire a Itasca Navicon Motorhome with Valley 7-Way Wiring for Flat Towing a Jeep
- Part # 118381 does not have a converter built in. Parts are tricky to select when dealing with motorhomes built off of production chassis. Itasca may have had a certain number of chassis built by Dodge with different wiring for their purposes. The parts we carry like 118381 are designed to be used with the production models sold at dealerships.
Fotrunately for you, Itasca teamed up with Valley and have provided you with a 7-Way connector and what ever converting needed to be done has already...
view full answer... - Trailer Brake Controller Installation on Winnebago View Built on 2008 Dodge Sprinter Chassis
- If your Winnie is indeed built on a 2008 Dodge Sprinter Chassis you can hard-wire a trailer brake controller like the easy-to-use and reliable Prodigy P3 # 90195 by using only two other parts.
You will use the # ETBC7 brake controller installation kit; this includes all the wiring parts and connectors needed to install the controller, as well as a 7-way socket (part # 37185 - already included in the kit).
The other item needed is simply a basic 4-pole harness # 118650 which plugs in...
view full answer... - Inflation Kit w/ 135-Degree Bend For 2006 Dodge Sprinter 3500 w/ Dual Wheels
- Without being able to see what you are referencing, from what you are saying it sounds like you are just needing a longer extension than what the Wheel Masters Tire Pressure Valve Extenders - 135-Degree Bend # WM8029135 offers. For that the best option is an inflation kit that uses hoses with a 135-degree bend:
- Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Hub Mount - 135-Degree Bend # WM8001-135
From my research your Sprinter has 17 inch wheels, but as long as they are...
view full answer...
Go To Results