The correct Curt trailer hitch that fits your 2017 Cadillac XT5 is part # C13285. This fits all models aside from the Platinum.
I am attaching an installation video of this on a 2017 XT5 that you can check out. If you can let me know what you plan on using the hitch for I can make some recommendations for you. view full answer...
Yes, the Thule Pulse Large Rooftop Cargo Box - 16 cu ft # TH615 will fit your 2019 Cadillac XT4. The Pulse can be mounted on your roof in such a way to allow you to access the rear hatch of your vehicle.
If you need a compatible crossbar system for your vehicle, I recommend the following setup:
- Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425
- SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR
- Landing Pad... view full answer...
According to the Yakima Fit Guide, the HangOut 2, part # Y02637, will fit your 2004 Cadillac CTS with a factory spoiler.
If the spoiler is aftermarket or dealer installed, it may not fit. view full answer...
If used with the # BX88297 adapter, the Blue Ox # BX1690 base plate kit is compatible with the Ready Brute Elite II tow bar.
To complete your towing system, you'd need safety cables like # RM-643 if you don't have them already, a taillight diode wiring kit like # RM-152-98146-7. Assuming your vehicle is at factory ride height using the stock tire size, the base plates will sit about 16-1/2 inches above the pavement. If this is more than 3 inches higher or lower than the receiver height... view full answer...
Sure thing, and there are a number of other parts you'll need to flat tow your 2023 Cadillac Escalade with your Blue Ox Apollo Non-Binding Tow Bar # BX7470.
Those parts include base plates, wiring, a battery disconnect, and a supplemental braking system. Please note there are differences in some parts depending on if your '23 Escalade has a gas or diesel engine, and also that base plates only fit 4WD models (there are no fits for 2WD models). I'll go ahead and list the parts out for you... view full answer...
Yes, the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" item # 24767 is a confirmed fit for your 2011 Cadillac CTS. view full answer...
I have a solution for you but a custom fit hitch for your 1996 Cadillac Fleetwood Hearse is not an option. The Curt Adjustable Trailer Hitch Receiver item # C13701 is a class III hitch that is adjustable to fit vehicle frames from 18 to 51 inches wide. It has a capacity of 5,000 lbs and has a 2 inch receiver. It requires no welding and all hardware to install is included. view full answer...
The K-Source Custom Towing Mirror Set # KS80900 will fit your 2007 Cadillac Escalade if it has manual mirrors or heated power mirrors. It will not fit if your Escalade has extendable or telescoping mirrors.
These 19-inch snap-on K-Source towing mirrors will provide a greatly expanded view of the road and your 20-foot trailer and install easily without tools. The 5-1/2-inch x 4-3/4-inch mirror face is manually adjustable to suit your requirements.
I have included for your reference a... view full answer...
Yes, the correct 4-way wiring harness for your 2008 Cadillac SRX is the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. view full answer...
There is one way for you to carry a pair of bikes with your 2021 Cadillac CT4, though I verified with the manufacturers that there are no trailer hitches that fit. There are also no trunk-mounted bike racks or roof racks for your CT4, leaving a single option, which is a SeaSucker bike rack:
- SeaSucker Mini Bomber Bike Rack for 2 Bikes - Fork Mount - Vacuum Cup Mount # 298-BM2006
The Mini Bomber # 298-BM2006 uses vacuum cups to attach to your roof, which you'll then mount the bikes to.... view full answer...
As long as the factory crossbars on your 2013 Cadillac SRX are between 20"-37" apart then you can fit the Thule Canyon XT # TH859XT on your vehicle without issues, since it is designed to fit on virtually any crossbar shape. You'll want to measure from the center of the front crossbar to the center of the rear crossbar to confirm your vehicle meets this requirement.
If you find you've got a smaller or larger spread just let me know what your measurement is and I'm happy to see if there... view full answer...
The # Y8860048 replacement mounting bracket should fit well on the factory cross bars on your 2007 Cadillac Escalade. This hardware and bracket kit is a replacement piece for the Yakima FatCat roof-mounted ski and snowboard carriers which will fit cross bars up to 3-7/8 inches wide or 1-1/4 inches tall.
Although the mounting brackets will fit your factory cross bars, I recommend confirming the model of your Yakima ski rack to make sure the # Y8860048 kit is the correct match. The replacement... view full answer...
Yes, you can use the Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 3-1/2" Span, part # 63232, with the Carr Mega Step Fold-Up Step - 2" Hitch - 14" Long - 500 lbs - Black, part # CARR190011B.
I have included a product description link, a video installation link, and a video review link below. view full answer...
While this may work, there is unfortunately no front hitch option available for your 2005 Cadillac Escalade. I may, however, have a solution for you. Depending on how steep your driveway is, the Trailer Valet XL Trailer Dolly with Chain Drive - 2" Hitch Ball - 10,000 lbs # TVXL2 works nicely to maneuver trailers into difficult spots.
For safety reasons you would not want to use Trailer Valet with a steep driveway. I only mention this since I do not know what pushing your boat and trailer... view full answer...
The K-Source Universal Towing Mirror # KS3891 will fit fine on the stock mirrors on your 2016 Cadillac Escalade as long as there is a gap between the mirror housing and the actual glass surface. This gap is where the mounting arms on the K-Source mirrors will grab on.
This mirror will fit on both driver and passenger side mirror housings so you'll want to order a quantity of 2 to equip both sides of the Escalade.
Our customers that purchased these mirrors have rated them highly. Please... view full answer...
The Draw-Tite Class III Trailer Hitch, # 75682, will fit the 2010 Cadillac SRX. It is only available in a Class III hitch. It is a 2 inch hitch with a towing weight capacity of 4,000 lbs. and a tongue weight capacity of 400 lbs.
The only Class II hitch I have for the 2010 Cadillac SRX is the Curt Class II Trailer Hitch, # C12070.
This is a 1-1/4 inch receiver with a towing weight capacity of 3,500 lbs, and a tongue weight capacity of 350 lbs.
I am sending a link to information on hitch... view full answer...
I double checked with Draw-Tite and the Draw-Tite Trailer Hitch Receiver # 36538 you were looking at is indeed a confirmed fit for your 2019 Cadillac XTS Luxury so I do not know why you were told it wouldn't fit.
This hitch will require you to use a 1/2" drill bit to enlarge the rearward hole on vehicle suspension mount to accept the included 1/2" bolt.
I recommend taking your vehicle to a different shop to have it installed.
I included a video of the # 36538 and a link to the written... view full answer...
The TST TPMS System # TST-507-RV-4-C can be used to monitor 14 tires. This system can support up to 38 tires total. The monitor will allow you to cycle thru all 14 tires. You will need to purchase additional sensors, as this kit only comes with 4. Additional sensors are sold in a 4 pack # TST-507-RV-S4 or a 2 pack # TST-507-RV-S2. view full answer...
Good question; yes, the sensor that opens the trunk on your 2019 Cadillac CT6 will still work after the installation of the Curt Trailer Hitch Receiver # C12160. As you can see by step 5 of the cut out of the linked installation instructions I added, you will unclip the motion sensor harness and then re-install it so the sensor will maintain its functionality. view full answer...
If your 2008 Cadillac Escalade is equipped with crossbars, the Thule Ski and Snowboard Carrier, part # TH7326, will work for you. This carrier can be attached to most crossbars, and features 4 locks which secure the rack to the crossbars and also secures the loads on the carrier. This carrier carrier holds up to 6 pairs of skis or 4 snowboards, and has a convenient telescoping feature which makes loading and unloading very simple. I have attached a link to a video that shows the features... view full answer...
Go To Results