The most sound advice I can give you would be to use the SuperChips programmer part # SU2060 on your 2006 Cadillac Escalade only when you are in Arizona so that you don't get yourself into any trouble. This does install and uninstall pretty easily so it wouldn't be too difficult to work pull off either.
We also have a California approved programmer that fits your vehicle too with the Superchips part # SU4845. This might be your easiest and best solution. view full answer...
The K-Source Custom Towing Mirror Set # KS80900 will fit your 2007 Cadillac Escalade if it has manual mirrors or heated power mirrors. It will not fit if your Escalade has extendable or telescoping mirrors.
These 19-inch snap-on K-Source towing mirrors will provide a greatly expanded view of the road and your 20-foot trailer and install easily without tools. The 5-1/2-inch x 4-3/4-inch mirror face is manually adjustable to suit your requirements.
I have included for your reference a... view full answer...
The correct front mount hitch receiver for your 2020 Cadillac Escalade ESV is the Curt # C31012. The EcoHitch # EH58RR you're looking at is for a Silverado so it won't work.
We don't have any front tow hooks for your Escalade as far as the OEM style goes, but we do have some tow hooks like part # C45832 that can be secured in the front receiver. view full answer...
Yes, you can use the Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 3-1/2" Span, part # 63232, with the Carr Mega Step Fold-Up Step - 2" Hitch - 14" Long - 500 lbs - Black, part # CARR190011B.
I have included a product description link, a video installation link, and a video review link below. view full answer...
I verified with Blue Ox that the Blue Ox Base Plate Kit # BX1716 has been confirmed to fit the Platinum Edition 2016 Cadillac Escalade.
If you also need a tow bar the Blue Ox Avail # BX7420 will pair well with the base plates and it comes with safety cables.
To power the Escalade's lights you can use the Roadmaster Tail Light Wiring Kit # RM-155. This will allow the signal lights to work with your RV's but not require you to tap into the wiring of the Cadillac. Also, in order to flat... view full answer...
The Thule K-Summit XXL Size K77 Self-Tensioning Snow Tire Chains # TH02230K77 do fit some 285mm width tires, P285/45-20 and P285/45-21, but are not recommended for any 22-inch rim applications.
We do offer tire chains made for your P285/45R22 tire size and these can be seen on the linked page. Of these the only chains rated S-Class (meaning they are low-profile chains that requires less clearance) is the Titan # TC2327.
GM states on page 319 of the 2016 Escalade owner's manual that tire... view full answer...
Yes. The 2020 Jayco Jay Flight SLX 8 224BH has a dry hitch weight of 440 lbs. Once loaded based on the current weights you will likely be under 600 lbs, so the Fastway e2 # FA94-00-0600 is a great option and if you want more ground clearance use # FA92-00-0600 instead for the trunnion bars. Either use 2 inch ball # EQ91-00-6080 or 2-5/16 inch ball # EQ91-00-6100 along with a thin-walled socket. Since it is such a high torque, you can go to your nearest dealer or auto shop and have them... view full answer...
Sure thing, and there are a number of other parts you'll need to flat tow your 2023 Cadillac Escalade with your Blue Ox Apollo Non-Binding Tow Bar # BX7470.
Those parts include base plates, wiring, a battery disconnect, and a supplemental braking system. Please note there are differences in some parts depending on if your '23 Escalade has a gas or diesel engine, and also that base plates only fit 4WD models (there are no fits for 2WD models). I'll go ahead and list the parts out for you... view full answer...
Your 2008 Cadillac Escalade should have a factory hitch size of 2 inches, but I would recommend to make sure by measuring the width of the opening on your factory trailer hitch. If it measures 2 inches then the Indiana University Logo Hitch Cover, part # AMG100178 will fit in your factory hitch.
If your hitch does not have a pin and clip available, you will also need the Hidden Hitch Pin and Clip, part # PC3 to install the hitch cover to your vehicle. If you want to lock the hitch cover... view full answer...
Both an air bag system and a Timbren system are meant to enhance the performance of your existing vehicle suspension. Either system is meant to be used in conjunction with other components of your suspension system, but are not intended to be a stand alone replacement of your existing suspension.
A Timbren system works to replace your existing jounce stop on either the front or rear suspension. Timbren systems work to level the load on your vehicle, increase stability and handling, decrease... view full answer...
You could install K-Source Vision System Rearview Mirror GPS+CAM # KSVS55020 on your 2004 Cadillac Escalade ESV but since the new mirrors does not have an OnStar feature you would lose that feature. view full answer...
Since these are universal, it is very likely that yes, the K-Source Universal Dual Lens Towing Mirrors # KS3990 on your 2018 Cadillac Escalade, though to confirm it you will want to take a quick measurement.
So long as your mirrors are between 4-1/2" tall and 11-1/2" tall then these mirrors will fit on your 2018 Cadillac Escalade.
I have added a link to a video review for you to check out as well of the K-Source Universal Dual Lens Towing Mirrors # KS3990. view full answer...
You will not have any issues with your hatch door clearing the Thule Helium Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Wheel Mount, part # TH44VR, while it is mounted on your 2022 Cadillac Escalade.
I have included a video review link below. view full answer...
Since you don't want to do an axle flip kit the only solution I have for lifting a standard round axle trailer is the Correct Track Trailer Alignment and Lift Kit item # RR23QX you were looking at. This kit mounts to your spring hangers and moves the attachment point down 1-1/4" or 2-1/4" lifting your trailer's ride height up a corresponding amount.
If you have a torsion axle then depending on what number you have there may be lifting blocks. A torsion axle is a square axle with built... view full answer...
I spoke to my contact at Valterra and she said the reason the D&W Inc. Spray-Port RV Exterior Hose Hookup - 2-3/4" Round - Black # PF147006 says it is for non-potable water is to stay in accordance with the Safe Drinking Water Act. The water from this hookup is not recommended to be used as drinking water.
Any of the hose hookups that we carry will be for non-drinking water. view full answer...
The Andersen Ultimate Connection, part # AM3200, works with any fixed fifth wheel pinbox. It doesn't work with rotating pin boxes.
So as long as your Lippert 1621 is a fixed pin box, like parts # LC1191191, # LC1191151 and # LC1387882 it'll work just fine for you. view full answer...
Yes, we have brake controllers that will work with your 2011 Cadillac Escalade. The Redarc Tow-Pro Liberty Brake Controller # RED24FR is a great choice for your Escalade. The knob controller is much nicer than having a large bulky controller on your dash.
You will need the Universal Wiring Harness # RED69FR to wire in the brake controller to the factory wiring that is located under the dash. I have linked an article below that will help you with the installation process since it is not... view full answer...
Yes, you can absolutely install the Malone Profile18B Rooftop Cargo Box # MPG911 with the factory roof rack on your 2014 Cadillac Escalade.
This cargo box measures 78-3/4" long x 32-3/8" wide x 15-3/4" tall, has an internal measurement of 76" long x 30" wide x 14-1/2" tall, and has a maximum weight capacity of 165-lbs.
Attached is a product video for you to check out as well. view full answer...
While this may work, there is unfortunately no front hitch option available for your 2005 Cadillac Escalade. I may, however, have a solution for you. Depending on how steep your driveway is, the Trailer Valet XL Trailer Dolly with Chain Drive - 2" Hitch Ball - 10,000 lbs # TVXL2 works nicely to maneuver trailers into difficult spots.
For safety reasons you would not want to use Trailer Valet with a steep driveway. I only mention this since I do not know what pushing your boat and trailer... view full answer...
Go To Results