Expert Answers about Cadillac XTS

• Is Draw-Tite Trailer Hitch 36538 Confirmed To Fit 2019 Cadillac XTS Luxury?
• I double checked with Draw-Tite and the Draw-Tite Trailer Hitch Receiver # 36538 you were looking at is indeed a confirmed fit for your 2019 Cadillac XTS Luxury so I do not know why you were told it wouldn't fit. This hitch will require you to use a 1/2" drill bit to enlarge the rearward hole on vehicle suspension mount to accept the included 1/2" bolt. I recommend taking your vehicle to a different shop to have it installed. I included a video of the # 36538 and a link to the written...
  view full answer...


• Will a Trailer Hitch Receiver on a 2013 Cadillac XTS Carry a 200 Pound Scooter
• Trailer hitch receivers to fit your 2013 Cadillac XTS, like the Draw-Tite # 36538, are Class II hitches with a 1-1/4 inch receiver opening and have a maximum tongue weight of 350 pounds. So the 200 pound scooter and the carrier it's riding on must all weigh less than 350 pounds. In addition you want to verify any capacity limitations of your Cadillac. If the vehicle is rated lower you must stay within this. You are limited by the lowest rated component and adding a hitch with a higher...
  view full answer...


• Gauge Display for 2015 Cadillac XTS for Improved Gas Mileage
• We do have an option that will help you improve the gas mileage on your 2015 Cadillac XTS, though it is not a tuner, it is an advanced gauge display. The Edge Insight CS2 Comprehensive Gauge Display - Color Screen # EP84030 has a Mileage Coach which will allow you to get more MPG. I have added a cut out of the linked instruction manual which shows how the Mileage Coach works for you.
  view full answer...


• Trailer Hitch and Wiring for a 2015 Cadillac XTS VSport
• Draw-Tite trailer hitch # 36538 is listed as a fit for all styles of the 2015 Cadillac XTS so that will include the VSport model. If you plan on doing some towing the proper ball mount for this hitch is # 36061. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And for trailer wiring you can use # C59496 to add a 4-Way flat connector to the rear of the vehicle.
  view full answer...


• Draw-Tite Trailer Hitch for 2018 Cadillac XTS
• We have not had the opportunity to test fit the Draw-Tite Trailer Hitch # 36762 on a 2018 Cadillac XTS and while sometimes the installation manual shows this, since this hitch fits this car as well as some models of Chevy Impala, there is not a photo in the manual either. I did a cut out from the linked installation instructions which show how the hitch will sit compared to the rear fascia, which should at least help give you an idea of how it will look. This is a Class II hitch with...
  view full answer...


• How to Install Yakima KingJoe Pro 3 Bike Trunk Rack on 2014 Cadillac XTS
• The Yakima KingJoe Pro 3 Bike Trunk-Mount Rack is indeed a confirmed fit on your 2014 Cadillac XTS. This carrier will install on your XTS as follows: place the upper strap hooks at the top edge of the trunk; the lower support frame rests on the lower portion of the license plate, below the numbers; Place the lower strap hooks at the bottom edge of the trunk and the side strap hooks to back side edge of the trunk.
  view full answer...