The Draw Tite trailer hitch part # 24767 that is a confirmed fit for your 2003 Cadillac CTS and has the towing capacities of 2,000 lbs total trailer and 200 lbs tongue weight. Most Jet Ski trailers weigh less than that so as long as the vehicle has the needed capacity as well you this will work. You will want to check the placard on the inside of your driver's door for your vehicles towing capacities. I also found a section of your owner's manual about towing a trailer you should check... view full answer...
Yes, the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" item # 24767 is a confirmed fit for your 2011 Cadillac CTS. view full answer...
Sorry for any confusion we may have caused you but I can confirm with 100% certainty that the Curt Trailer Hitch Receiver part # C11900 is a fit for a 2016 Cadillac CTS-V. This is actually the only trailer hitch available for this vehicle as well and I did check with Curt directly for you to confirm fit. If you don't already have a bike rack, my favorite is the Kuat Transfer V2 Bike Platform Rack part # KU74FR because it is lightweight and easy to load your bikes onto due to the open frame... view full answer...
We offer two styles of bike racks that will work for your 2013 Cadillac CTS Coupe. There are trunk mounted bike racks and hitch mounted bike racks. In in order to minimize contact with and potential damage to your vehicle I advise installing a hitch and using a hitch mounted platform style of bike carrier.
We offer one hitch that is a fit for a 2013 Cadillac CTS Coupe and it is the Curt # C11196. This is a Class I trailer hitch that has a 1-1/4 receiver opening, and includes a ball mount... view full answer...
Yes, we do have parts that'll fit your 2018 Cadillac CTS to tow a trailer. From what I've found your car has a maximum capacity of 1,000 pounds tops. You didn't mention the size or weight of the trailer but just make sure you stay within this limitation. I also recommend checking your owner's manual just to verify the number.
To fit the Cadillac you want the Curt hitch # C11900. It's a custom fit for the Cadillac and also has a concealed cross tube so you won't be messing with the... view full answer...
The MagnaFlow Performance Muffler # MF11226 referenced in your question is a universal item so it isn't vehicle specific. In order to confirm if this will fit your 2012 Cadillac CTS Coupe without adding a reducer or expander you will just want to measure the inlets and outlets on your existing exhaust system. Both the inlet and outlet on this muffler have a 2-1/2 inch diameter. Its overall dimensions are 4 inches tall, 9 inches wide, and 20 inches long. view full answer...
I spoke with my contact at Curt and he told me the Curt Class I Receiver Hitch # C11307 is a fit for both the 2010 Cadillac CTS-V Sedan, and the 2010 Cadillac CTS Sedan.
The Curt Hitch includes a pin and clip. If you plan on doing some light duty towing you will need a ball mount like # C11307, a hitch ball like # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For trailer wiring use Curt Vehicle Wiring Harness, # C56044.
I have linked to the hitch's installation instructions... view full answer...
For your sedan 2015 Cadillac CTS we carry one trunk mounted rack from Saris that is compatible. It's the Saris Bones in Black # SA805BL
Some accessories I recommend to help protect your vehicle from the bikes and rack are the Protect-O-Pads # SA2060 and the Bike Wheel and Handlebar Stabilizers # SA3033. For added security and to lock your bike to the rack Saris has a cable lock # SA981.
While we don't have a video of this rack installed on a sedan I have linked an image of what it will... view full answer...
The correct Kat's engine block heater you need for your 2007 Cadillac CTS with a 2.8 liter is the part # KH11811. I checked with Kat's and they recommend the Right Rear cartridge which if you were facing the engine under the hood would be just around the left (passenger side) corner of the block. See attached picture. view full answer...
It sounds like maybe you're trying to possibly find a trunk mounted bike rack for your 2005 Cadillac CTS. I'm happy to confirm that the Thule Gateway Pro 2 # TH88VR you were looking at fits your 2005 Cadillac CTS and will allow you to carry 2 bikes on your vehicle. This is a trunk mounted rack that I really like because it comes with locks for the bike and the rack, so your investments are always going to be secured.
If you need a 3 bike rack, the Thule Passage # TH911XT would be a good... view full answer...
The location and visibility of a trailer hitch on your 2010 Cadillac CTS will be almost identical between Curt, # C11307 and Draw-Tite, # 24767. Each of these trailer hitches use the same mounting location and have practically the same dimensions. For an exact measurement, the end of the receiver from the Curt hitch will actually sit 1/8 of an inch closer to the rear edge of the bumper.
As far as aesthetics are concerned, I agree that the Curt hitch has a more pleasing design. We have... view full answer...
The 2012 Cadillac CTS wagon requires a different trailer wiring harness than does the sedan. You would use either # C59236 or # 46255 for the wagon model. Installation will not be quite the same because these are hardwire installations and you will need to use a circuit tester to find the functions of the wiring behind the tail lights. I have included links to the installation instructions for these harnesses for you to view. view full answer...
Yes, the Hopkins Custom Fit Trailer Wiring for Cadillac CTS-V, Part # 46255, works with both the sedan and wagon versions. Installation instructions are included with this message and this part includes an installation kit.
This custom harness hard wires into your vehicle tail light wiring and provides a 4-pole flat trailer connector at the Cadillac rear bumper. It also isolates and protects the tow vehicle from trailer electrical malfunctions.
It is recommended that you use a circuit... view full answer...
According to the Yakima Fit Guide, the HangOut 2, part # Y02637, will fit your 2004 Cadillac CTS with a factory spoiler.
If the spoiler is aftermarket or dealer installed, it may not fit. view full answer...
For a Class I hitch that fits your 2010 Cadillac CTS such as the Curt Trailer Hitch Receiver # C11307, the hitch manufacturer specifies the exact ball mount that you will need to use with the hitch. For this hitch, the one that Curt specifies will be plenty long enough at 11-1/4 inches long, the Curt Drawbar # C45522.
With this ball mount you will also need the Pin and Clip # C21410 and a hitch ball (which depends on the size of your trailer's coupler), either 1-7/8" Hitch Ball # C40001... view full answer...
Yes, the Curt # C11307 will fit your 2013 Cadillac CTS Luxury Sedan. The hitch features a bolt-on installation and comes with a limited lifetime warranty.
If you plan on towing, you can use the # C56044 for wiring. This will give you a 4-way to power your trailer's signal lights. For a ball mount, check out the # 3594 along with the # C40001 for a 1-7/8" or # 19258 for a 2" ball. view full answer...
I have great news! The Hopkins backup sensor system, # HM60100VA, is not vehicle specific so you can use it on the 2013 Cadillac CTS, 2002 Chevy Avalanche, and 2007 Saturn Aura. You would need one for each vehicle though.
It wires into a reverse light wire on a vehicle to provide power to the sensors. Once an object is in range it will start beeping. Beeping gets more rapid the closer you get to an object in range of the sensors. view full answer...
I verified with Curt that the #C11900 trailer hitch does fit all 4-door Sedan models of the 2014 Cadillac CTS including the CTS Vsport.
I also recommending checking your Cadillac's owner's manual for any restrictions on adding a trailer hitch. I wasn't able to find anything specific on your vehicle but I have seen on some model years of the CTS-V that towing is not recommended from GM so taking a look at your Vsport's printed manual is probably a good idea. view full answer...
As long as your 2014 Cadillac CTS isn't the CTS-V model you can install the Curt Class I Trailer Hitch Receiver # C11196 on your Coupe for use with a bike rack.
Then for a bike rack I recommend checking out the Inno Tire Hold # INH110 which is a 1-bike rack that can hold up to a 60 lb bike and secures it by the front and rear tires. This will work great if your bike either doesn't have fenders or if it has smaller fenders that these clamps won't come into contact with.
Attached is a review... view full answer...
Go To Results