bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Cadillac XT5


  • What Valve Stem Will Fit The 8" Steel Trailer Wheel # AM20016 And Is Safe To Use Up To 100psi?
  • The Steel Trailer Wheel # AM20016 has a 0.453" diameter opening for a valve stem. Since you need up to 100psi I recommend using the Metal, Bolt-In Valve Stem # AM20906. This stem being metal is less likely to become damaged like rubber valve stems. The 5.70-8 Tires # AM10010(B), # AM10012(C) and # AM10013(D) we carry do require a 8" x 3-3/4" Wheel # AM20006. Other tire manufacturers may allow this same size tire to fit the wider wheel but I do not have a way to verify with every tire...
    view full answer...

  • Dimensions of Inno Phantom Rooftop Cargo Box
  • You asked abou the "maximum height above the cross bar of the Inno # INBRM466BK Phantom." This cargo box sits right on the crossbar so there is no height above the cross bar. If you are asking about the height from the vehicle roof to the bottom of the cross bar - that would depend on the roof rails and cross rails used. The interior measurements are not provided but the exterior dimensions are 78-3/4" long, 37-3/8" wide, and 17-3/4" tall. The case material is 2-ply and 3-ply ABS so...
    view full answer...

  • Roof Rack for 2019 Cadillac XT5 Platinum
  • In regards to vehicles that have a trailer hitch - which would be put on at the factory - some of them can be removed, but some are welded on, and there is unfortunately no way for us to know which vehicles have welded hitches. Additionally, there is not a fit for a trailer hitch fit for a 2019 Cadillac XT5 Platinum which would allow you to replace it. The roof rack is another story and that can be removed on a '19 XT5 Platinum. The roof rack on this vehicle (which I checked out and you...
    view full answer...

  • Will the CIPA Universal Fit Towing Mirror # CM11980 Fit a 2017 Cadillac XT5
  • Although we haven't had the opportunity to test fit the CIPA Universal Fit Towing Mirror # CM11980 yet (as of January 2018) on a 2017 Cadillac XT5, it may fit. For our universal towing mirrors we only add them as a "fit" once we have been able to actually test fit the mirror ourselves. If you check out the attached photo you can see that as long as there is a little space between your mirror and the housing on your 2017 Cadillac XT5 it it will fit and work well. I went out to the warehouse...
    view full answer...

  • Are Taillights of Vehicle Visible when etrailer Folding Cargo Carrier E98874 is Folded Up
  • For your 2018 Cadillac XT5 the etrailer folding cargo carrier part # E98874 would be a great option to allow you to carry extra cargo on your trip. Since the floor of the carrier is mesh too that means your taillights would easily still be visible when folded up like you can see in the attached picture. Also keep in mind you have a third brake light up high above the rear windshield as well. If you needed a trailer hitch on your 2018 XT5 the Draw Tite part # 76022 would be a great choice too.
    view full answer...

  • Are Curt and etrailer Hitch for 2023 Cadillac XT5 Same
  • The etrailer hitch # e62AR and the Curt # C13285 that fit the 2023 Cadillac XT5 are both made by same company so they would have exact same clearance dimensions. Everything I am seeing online says the 24' XT5 is a carryover from the 23' model so the hitches should carry over.
    view full answer...

  • Trailer Hitch Receiver Compatibility With a 2018 Cadillac XT5
  • We do have a receiver that is custom fit for your 2018 Cadillac XT5 but the etrailer Trailer Hitch Receiver # e98865 will not. It is only confirmed to fit the 2005 - 2017 Chevrolet Equinox, 2010 - 2017 GMC Terrain, 2006 - 2009 Pontiac Torrent, and 2002 - 2007 Saturn Vue. I recommend the etrailer Trailer Hitch Receiver # e62AR for your Cadillac XT5. This will work on all trims with the exception of the Platinum Trim. It is rated for a maximum tongue weight of 750 lbs and a maximum trailer...
    view full answer...

  • No Drill Installation Trailer Hitch Receiver and Wiring Harness For a 2018 Cadillac XT5
  • The Curt Trailer Hitch Receiver # C13285 does not require any drilling into the frame of your 2018 Cadillac XT5. If you have a Platinum trim this receiver will not fit on your XT5. You will also not need to modify any of your panels for the receiver to fit. The receiver will attach to your frame with carriage bolts and square hole spacers inside the frame that will pass through factory holes. I have linked an installation video below of an installation that was done in our shop for you...
    view full answer...

  • Completely Hidden Trailer Hitch For 2023 Cadillac XT5
  • There is indeed a trailer hitch for your 2023 Cadillac XT5 that is completely hidden after the install. The hitch is made by Draw-Tite and is the following part number: - Hidden Hitch by Draw-Tite Trailer Hitch Receiver # DT34YR Not only is the crosstube of the # DT34YR totally concealed after install, but the receiver is also removable when you aren't using it so your Cadillac will completely retain its factory appearance.
    view full answer...

  • Correct Curt Trailer Hitch Fit for a 2022 Cadillac XT5
  • I confirmed with Curt that the Curt Trailer Hitch Receiver part # C13285 is a confirmed fit for a 2022 Cadillac XT5. It has a 2" opening that will work great for towing or hitch mounted accessories like bike racks or cargo carriers. It features a simple bolt-on install which you can see from the video I did below.
    view full answer...

  • Does Kuat NV 2.0 Bike Rack Fit 2017 Cadillac XT5
  • I took a look at the clearances for you of the Kuat NV 2.0 bike rack, and it will definitely be able to fit your 2017 Cadillac XT5 with either of the trailer hitch receivers that fit your car, the etrailer # e62AR, or the one you asked about, the Curt # C13285. The NV 2.0 is one of the best bike racks available because of how easy it is to use, its integrated lock system, and the fact it can carry even heavy bikes with its 60 lb per-bike capacity. The NV 2.0 is available in two different...
    view full answer...

  • Best Bike Rack for Clearing the Rear Hatch on a Cadillac XT5
  • Thanks for the pictures! I have a solution for you but there is a couple of issues with using the Inno Tire Hold bike rack. The hitch pin hole on the etrailer item # e62AR hitch for your 2017 Cadillac XT5 sits pretty far back from the edge of your bumper at 6". I would not recommend using the Inno Tire Hold Bike Rack for 1 Bike - 1-1/4" and 2" Hitches item # INH110 because of the lack of clearance. The distance from the hitch pin hole to the closest point on the carrier is 6" so you will...
    view full answer...

  • Trailer Hitch For 2023 Cadillac XT5 For Bike Rack & Electric Bikes
  • We have what you need for your 2023 Cadillac XT5 for both the hitch and bike rack, though we do not have any physical retailers as we are an online retailer. We do have a dealer installer network though which you can use to input your zip code and find local installers; I have added a link to that below. As for the hitch and bike rack for your '23 XT5 and e-bikes, here is what you'll need: - Curt Trailer Hitch Receiver # C13285 - Hollywood Racks Sport Rider SE Bike Rack for 2 Electric...
    view full answer...

  • Dimensions of the Knob for the Redarc Tow Pro Elite Brake Controller
  • The control knob dimensions are 2-3/8" long x 3/4" wide x 7/8" tall. To install the Knob on the item # RED44FR, you will need 1-3/4" of depth, a space 9/16" wide, and 3/4" tall; the size of the hole required is 25/64". The space behind the knob is 1-3/4" I have linked a dimensional diagram below. The Redarc Tow-Pro Elite Brake Controller item # RED44FR is confirmed to fit your 2021 Cadillac XT5.
    view full answer...

  • Compatibility of Curt # 13285 on 2018 Cadillac XT5 with Swagman XTC-2 Bike Rack # 64670
  • The Curt Trailer Hitch Receiver # C13285 on your 2018 Cadillac XT5 will have a hitch pin center to outer bumper measurement of 6 inches. The Swagman XTC-2 # S64670 has a measurement from the center of the hitch pin to the closest wheel hoop of 8 inches. You will have 2 inches of clearance so you will be able to use the XTC-2 bike carrier with your Curt trailer hitch.
    view full answer...

  • Will The Thule Pulse Large Rooftop Cargo Box Fit a 2020 Cadillac XT5?
  • I have some measurements you will need to take to verify if the Thule Pulse Large Rooftop Cargo Box # TH615 will fit your 2020 Cadillac XT5. This box will fit crossbars up to 3-5/16" wide by 1-1/2" tall with a spread of 23-5/8" to 34-3/8" on center. You will also need to measure from the center of your front crossbar to the seam where the rear hatch meets the roof. If you do not already have a roof rack you can measure from the centers of the attachment points on flush mounted roof rails....
    view full answer...

  • How To Fit A Trailer Hitch Receiver and 4-Way Wiring To a 2017 Cadillac XT5 Platinum Trim
  • I have a way you can install a receiver on your 2017 Cadillac XT5 as currently the only custom fit trailer hitch receivers available will not fit the Platinum trim. To use the etrailer Trailer Hitch Receiver # e62AR on your XT5 you will need to swap out the Platinum lower trim panel for one of the removable trim panels found on the other models of the XT5. You will need to contact a dealer for these parts new or check with local salvage yards for the parts you need. The T-One Vehicle...
    view full answer...

  • Correct Curt Trailer Hitch Fit for a 2017 Cadillac XT5
  • The correct Curt trailer hitch that fits your 2017 Cadillac XT5 is part # C13285. This fits all models aside from the Platinum. I am attaching an installation video of this on a 2017 XT5 that you can check out. If you can let me know what you plan on using the hitch for I can make some recommendations for you.
    view full answer...

  • Can Rear Bumper Door be Put Back on a 2017 Cadillac XT5 with etrailer Trailer Hitch Installed
  • Yes, you can reinstall the rear fascia door on your 2017 Cadillac XT5 when not using the etrailer trailer hitch # e62AR. This is shown at the beginning of the video showing installation that I have linked for you. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage...
    view full answer...

  • Available Trailer Hitch Fits for 2017 Cadillac XT5
  • We do have two confirmed hitch fits for the 2017 Cadillac XT5 that you can see on the linked page. Both of the 2-inch Class III hitches we have for this vehicle, the etrailer # e62AR and the Curt # C13285, offer no-drill installation and include all required mounting hardware. An installation video is linked for you. Trailer hitches are custom-fit items that usually are not interchangeable between vehicles. There are exceptions, such as with sister brands like GMC and Chevrolet, where...
    view full answer...