To add a trailer hitch to your 2011 Cadillac DTS you will want the Draw-Tite Trailer Hitch item # 36287. This hitch is custom fit and bolts to your Cadillac with included hardware.
This is a class II hitch with a 1-1/4" receiver. It has a 3,500 lbs towing capacity, and a 300 lbs maximum tongue weight. I checked with our vendors no one made a 2" class III hitch for your vehicle.
For a compatible wiring harness you will want the Tekonsha item # TK26VR. This custom-fit T-One connector plugs... view full answer...
You can tow a trailer with incandescent lights to a vehicle with LED lights. There are only issues on some vehicles when towing a trailer that has LED lights.
What allows you to use a T-connector type of wiring harness like # 118535 on a vehicle with LED tail lights like your 2007 Cadillac DTS is a powered converter. A powered converter gets power for the trailer lights directly from the vehicle battery. It receives the signals from the connections to the tail lights but the vast majority... view full answer...
Class III hitches that have a 2 inch opening are normally only used on higher capacity vehicles like trucks and SUVs. For your 2007 Cadillac DTS we have Class II hitches with 1-1/4 inch opening due to it being a lower capacity vehicle overall. For that we have the Curt # C12058 which has higher capacities for a Class II hitch and although is the smaller hitch size has the same weight capacities as Class III hitches at 350 lb tongue weight and 3,500 lb trailer towing weight. view full answer...
Go To Results