Yes, our Curt Trailer Hitch Receiver # C11448 is the Curt part number 11448. I reached out to Curt as we do not have any of these in our warehouse to confirm the measurement. They informed me the mounting bolt hole measurement is spread 12-1/2" on center for the mounting holes in the trunk area of your 2021 Audi A4. view full answer...
There unfortunately isn't a trailer hitch without a built in drop available for the 2015 Audi Q3 so you're only option for raising the height of the bike rack would be to use a hitch adapter like the Roadmaster High-Low Adapter for Tow Bars # RM-048-4. This adapter would give you a 4" rise to provide more ground clearance for your bike rack.
Note: Hitch adapters do reduce the tongue weight capacity of the hitch by 50%, so your Curt Trailer Hitch Receiver # C13238 would have a maximum... view full answer...
The Titan Zinc-Plated Brake Actuator part # T43397007K for 7K or the Titan Zinc-Plated Brake Actuator part # T2480000 for 6K are both options which fit a European 50mm hitch ball due to the handwheel mechanism. In regards to installation, so long as you have a 3" wide tongue they will both fit just fine. view full answer...
Since you are not towing there is an option for a hitch with a 2 inch receiver that fits your 2020 Audi A4, the Stealth Hitches Hidden Rack Receiver - Custom Fit - 2" # 391AUDA417.
This comes with a 2" receiver that you can only use for accessories like a bike rack, and is totally removable so when you aren't using your bike rack it is like you don't have hitch on your Audi at all. You can even get a case to protect the receiver when you remove it, the Carrying Case for Stealth Hitches... view full answer...
Yes, there is a trailer hitch that is confirmed to fit your 2023 Audi A6 Allroad:
- Stealth Hitches Hidden Rack Receiver # SH74ZR
This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver for hitch mounted accessories such as bike racks and cargo carriers. The 2" receiver is also removable, allowing for a cleaner appearance when not using the hitch.
If you plan to do any towing, you will need to add the Towing Kit w/ Ball Mount... view full answer...
For your application you need to install the Curt Trailer Hitch # C11344 on your 2010 Audi A6 and then use the Thule EasyFold XT Bike Rack # TH903202 for 2 of your e-bikes. This is the only setup that I know of which will accommodate for heavier e-bikes on a Class I hitch.
Since Class I hitches are a bit weaker you aren't able to carry more than 2 bikes and then the EasyFold XT is the only bike rack rated for heavier bikes (it can carry 65 lb bikes) as well as for use with the Class I... view full answer...
The reason the Curt # C13331 does not fit on the Audi SQ5 is because of issues with the fascia being different between the Q5 and SQ5; other manufacturers have been able to make their hitches compatible on both, but Curt was not able to address this in their manufacturing. The issue actually stems from what is behind the bumper and under the fascia, and the differences between the Q5 and SQ5 models.
For that reason, you will need to go with something like the EcoHitch # 306-X7397, which... view full answer...
Thule does not recommend their excellent OutWay trunk-mount bike carrier # THTH45JV for your 2012 Audi A7. In fact they do not recommend any trunk-mount rack for your car due to the potential for damage to the trunk lid and/or its hinge, neither of which were designed to handle the weight of a loaded bike rack. The same is true for Yakima and SportRack - again no trunk racks are recommended.
You can use a hitch-mount 2-bike rack - that puts no pressure at all on your trunk - by installing... view full answer...
The Rhino-Rack SRB Legs # RRSX031 are designed for other vehicles so you will need to use the Rhino-Rack SRB Legs # RRSX030 instead for the flush rails on your 2018 Audi Q5. To complete this roof rack system you just need the 49" Vortex Aero Crossbars # RRVA126B-2. I've attached an installation video and photo of this roof rack on a 2018 Q5 for you to check out.
If you let me know what you plan on using the roof rack for I'd be more than happy to make additional recommendations for you! view full answer...
I spoke to Draw-Tite about their Max-Frame Trailer Hitch Receiver # 76183 and they confirmed that it will fit all models including your 2020 Audi Q5 Plug-in Hybrid. With the receiver replacing the bumper beam on your Q5 they agree the hybrid system would have no way in interfering with the installation.
The instructions that you saw and I have linked below are the only set of instructions that are available for this receiver. Since the steps are going to be the same for both vehicles... view full answer...
Yes, the Stealth Hitches Hidden Rack Receiver # 391AUDA5S518 is the correct receiver for your 2019 Audi A5 Sportback Prestige. I have linked a video below of the installation done on a 2018 S5 Sportback which is very similar to your A5.
If you are planning on doing any trailer towing you will need the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit # 391AUDA5S518T that includes their ball mount and wiring for installation on your A5.
If you will only need your receiver for... view full answer...
The Curt T-Connector Vehicle Wiring Harness part # C56404 is a confirmed fit for a 2013 Audi Q5 Hybrid. It offers plug-n-play installation as well so there will be no splicing into any wires on the vehicle. It provides a standard 4-way flat trailer connector that has all the basic trailer lighting functions.
If you don't already have a trailer hitch, the Draw-Tite Trailer Hitch Receiver part # 75940 is what I recommend because of the hidden cross tube. It offers bolt-on installation as well. view full answer...
The Curt Trailer Hitch Receiver # C11399 will fit your 2020 Audi A3. I recommend using the Stealth Hitches Hidden Rack Receiver # SH64ZR with Towing Kit # SH34ZR for your 2020 Audi A3 sedan. This has a removable 2" receiver for hitch mounted accessories as well as a 2" ball mount for towing a small trailer. It also includes wiring for a 4-way flat connector. view full answer...
If you are looking at the Konig Self-Tensioning, Low-Pro Snow Tire Chains - Diamond Pattern - D Link # TH04115255, these chains are confirmed to fit the standard 255/45-20 tires on your 2019 Audi Q5. As per the Audi owner's manual, chains should only be installed on the rear wheels. The great thing about these chains is that not only do they come with self-tensioners, but they come with a built-in pedal to activate the tensioners. This is a great feature that not only makes the installation... view full answer...
We do have a solution that should work for you. You can mount the Thule Pulse Alpine Rooftop Cargo Box - 11 Cu Ft - Matte Black, part # TH613, to the Thule crossbars on your 2014 Audi Allroad with the following item. The T-Track Adapter for Thule Cargo Boxes with PowerClick, part # TH27PQ, will allow you to mount your Pulse Alpine box the t channels of your crossbars.
I have included a product description link and video review links below. view full answer...
The Yakima OnRamp Bike Rack # Y36FR requires 5" of clearance from the center of the hitch pin hole to the farthest edge of your bumper to fit properly. According to the different hitch fits we have available for your 2020 Audi Q5 this shouldn't be a problem but if you already have a hitch installed it would be a good idea to check out this measurement on your end just to be on the safe side of things.
If you don't already have a hitch installed I recommend picking up the etrailer Trailer... view full answer...
I do have an option for you but there are no plug-in play trailer wiring harness options for a 2011 Audi Q5. The Curt T-Connector Vehicle Wiring Harness you referenced is not a fit so if you're having issue that is likely why. I recommend the ZCI Circuit Protected Vehicle Wiring Harness part # 119250KIT which uses clamp-on sensors therefore no splicing is required.
Please note, you should be testing the wires to use with the hatch closed. view full answer...
To carry a bike with your 2022 Audi A3 you'll need to have a hitch fabricated by a shop (since there are none custom made for your vehicle), or use trunk mounted rack since there currently (July 2023) are not roof rack options for your vehicle either.
For a trunk mount rack I recommend the Thule OutWay which comes in 2 different styles:
- Hanging Style 2-Bike # TH45JV OR 3-Bike # TH56BV
- Platform Style # TH65JV
This rack was designed for high-end vehicles both with how it attaches... view full answer...
A better fit would be Classic Accessories PolyPro III Deluxe Travel Trailer Cover, # 052963731637, designed for a trailer up to 20 feet long and up to 118 inches tall. It is definitely tall enough and long enough. There will be some slack given the size of your trailer versus the size of this cover but it will cover it.
The Classic Accessories cover, # CA80103, that you have referenced is made for a Class B motor home that has a front end that sticks out in the front. Because of the shape... view full answer...
Actually there is an adapter from Curt # C51522 that you can use to plug the Tekonsha Prodigy P3 # 90195 directly into your 2011 Audi Q7 if it has the factory 7-Way. You will need to cut the one end off of the adapter and splice the pigtail that comes with the P3 to the adapter (per color) for this to work.
If you don't have the factory 7-Way then you will need to run to your local dealer to get parts #1J0-972-782 and #000-979-228 to basically make an adapter (see attached article).
I... view full answer...
Go To Results