bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Audi SQ5


  • Will The SportRack Skyline XL Cargo Carrier Fit A 2018 Audi SQ5?
  • The SportRack SkyLine XL Cargo Box - Roof Mount # SR29ZR that you mentioned will work just fine with your 2018 Audi SQ5! This cargo carrier will work with round, square, aero, elliptical, and most factory crossbars. For a crossbar recommendation, I recommend taking a look at the: -Thule WingBar Evo Crossbars - Aluminum # TH711200, with the feet # TH710601, and the fit kit # TH186045. These bars are quiet, aerodynamic, low-profile with a maximum capacity of 220-lbs, and measures 47"...
    view full answer...

  • Recommended Hitch, Wiring Harness, and Brake Controller for a 2022 Audi SQ5
  • I would be happy to help you add a hitch, wiring harness, and brake controller to your 2022 Audi SQ5. For the easiest all in one solution to your hitch and wiring harness, I recommend the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit item # 391AUDQ518T. This hitch is custom fit and bolts directly to your Audi with included hardware. This kit includes the 7-way wiring harness you will need to control your trailer's brakes. The receiver is also completely removable when...
    view full answer...

  • Recommended Hitch and Wiring Harness for a 2019 Audi SQ5
  • We do have a network of installers that are in the Everett Washington area. You will want to go to the left hand side of the item # 306-X7397 product page. Below the pictures and videos is a blue link that says, Locate installers near me. You will want to click on this link and input your zip code. This will give you a list of reputable installers. The EcoHitch Hidden Trailer Hitch item # 306-X7397 is confirmed to fit your 2019 Audi SQ5. If you are planning on towing you will also need...
    view full answer...

  • Does Draw Tite 76183 Hitch Fit 2019 Audi SQ5
  • The Draw Tite part # 76183 has been confirmed as a fit for your 2019 Audi SQ5 so we guarantee it will fit and work great for you. For a no splice trailer wiring harness too you'd want the ZCI kit part # 119250KIT. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip,...
    view full answer...

  • Is Trimming Needed With Draw-Tite Hitch For Audi 2020 SQ5?
  • Our installation video states that some trimming may be required on your 2020 Audi SQ5 but the installer was able to replace the fascia without trimming it. So to answer your question I would say no you do not need to trim the fascia when installing the Draw-Tite Max-Frame Trailer Hitch Receiver # 76183. While installing if you feel you will need to trim the fascia to meet your standards, you will need to trim using a rotary tool or some snips. Then trace the section of fascia that is...
    view full answer...

  • Snowboard Rack That Fits Factory Crossbars on 2014 Audi SQ5
  • There are 4-board snowboard racks which will fit your 2014 Audi SQ5, though I checked with Inno and the Inno Gravity INA927 will not. I recommend the Yakima FreshTrack # Y03093, which is confirmed to fit your '14 Audi, will hold 4 snowboards, has a push-button design which makes it easy to open and also locks, allowing you to protect both your snowboards and the rack. I have added a link to a video review of this carrier for you to take a look at as well.
    view full answer...

  • Hitch Confirmed to Fit a 2022 Audi SQ5
  • Yes, we have a hitch that is confirmed to fit your 2022 Audi SQ5. The Stealth Hitches Hidden Rack Receiver # 391AUDQ518 is confirmed to fit all models of the 2022 Audi SQ5. This hitch is made in the USA, has a bolt-on, no-drill installation and is going to provide you with a 2" receiver opening for using hitch mounted accessories like a bike rack or cargo carrier. The hitch receiver that comes with this hitch is not rated for towing, so if you plan to do any towing you will need to add...
    view full answer...

  • Best Bike Rack For Carbon Fiber & Titanium Frame Road Bikes & 2" Trailer Hitch
  • Those are some pretty awesome bikes you have there and they definitely deserve a bike rack of similar quality. When I started reading your question there was one rack that came to mind, right away and then you even went on to mention the brand, which is Kuat. The best rack for your carbon frame and titanium frame bikes is one that isn't going to touch those frames and is super simple to use, the Kuat Sherpa 2.0, which is even available in your choice of colors: - Gray: Kuat Sherpa 2.0...
    view full answer...

  • Will The Tekonsha Powered Tail Light Converter # 119190KIT Fit The 2023 Audi SQ5?
  • Yes, the Curt Powered Tail Light Converter # C59496 will allow you to install a 4-way flat connector on your 2023 Audi SQ5.
    view full answer...

  • EcoHitch Hidden Trailer Hitch Receiver for a 2021 Audi SQ5
  • Yes, the EcoHitch Hidden Trailer Hitch Receiver item # 306-X7397 is compatible with your 2021 Audi SQ5. It has a weight capacity of up to 5000 lbs and conceals well behind the rear bumper.
    view full answer...

  • Will the Curt Trailer Hitch Receiver # C13136 Fit a 2017 Audi SQ5
  • I do have a solution for you, but the Curt Trailer Hitch Receiver # C13136 is not confirmed to fit your 2017 Audi SQ5. The Class III Draw-Tite Max-Frame Trailer Hitch Receiver # 75940 is the correct part that you are looking for. Even though we have rated this installation at a 10 out of 10 for difficulty, if you are used to working on cars you might be able to do it yourself. I have attached a video of this hitch being installed on a 2017 Q5 that you can use as a reference. If you will...
    view full answer...

  • Will the Thule Gateway Pro Trunk 3 Bike Rack Fit a 2019 Audi SQ5
  • I do have an alternative trunk bike rack that will fit your 2019 Audi SQ5, but the Thule Gateway Pro 3 Bike Rack # TH78VR won't work. Instead I recommend the Yakima FullBack # Y02633 which is a comparable rack to the Gateway Pro 3. It can carry up to 3 bikes (35 lbs per bike or 90 for all 3 bikes), it is super easy to adjust, and it actually comes with bike and rack locks. I actually had the opportunity to install this on a 2020 Q7 and I've linked that review video for you to check out....
    view full answer...

  • Does EcoHitch for 2019 Audi SQ5 Replace Factory Bumper Beam
  • The EcoHitch part # 306-X7397 that you referenced fits behind the rear bumper beam of your 2019 Audi SQ5 once installed.
    view full answer...

  • Trailer Hitch Receiver Confirmed to Fit a 2015 Audi SQ5
  • The Curt # C13136 is for the Audi Q5 but isn't a fit for the SQ5 like you have. You're correct that the Draw-Tite, part # 75940, is what you need. It's confirmed to fit your 2015 Audi SQ5. I've attached a picture that a customer submitted of the htich on an SQ5 for you. I've also linked an install video on a Q5 but the process is same. The wiring I recommend is part # 119250KIT. I've linked a video of this install on a different Audi model but keep in mind it's a universal part, so...
    view full answer...

  • Why Cant I Use a Curt C13331 on my 2018 Audi SQ5 When It Fits the 2018 Audi Q5
  • The reason the Curt # C13331 does not fit on the Audi SQ5 is because of issues with the fascia being different between the Q5 and SQ5; other manufacturers have been able to make their hitches compatible on both, but Curt was not able to address this in their manufacturing. The issue actually stems from what is behind the bumper and under the fascia, and the differences between the Q5 and SQ5 models. For that reason, you will need to go with something like the EcoHitch # 306-X7397, which...
    view full answer...

  • Who Makes The Stealth Hitch Receiver
  • The Stealth Hitches Trailer Hitch Receiver w/ Towing Package - Custom Fit - 2" like part # SH34FRT for the 2019 - 2020 Audi e-tron are made by a company called Stealth Hitches. They are a newer company that manufactures completely hidden designs. The cross tube is completely concealed behind the bumper. The receiver and ball mount are two different attachments that latch into place when you need to use them. The pieces are removable when not in use for a nice clean OEM look on your vehicle.
    view full answer...