bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Jeep
  3. 2012
  4. Tekonsha
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118425
Our Price: $43.90
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
The best technical support and full custom fit vehicle wiring installation instructions. Great price custom fit vehicle wiring and expert service. Jeep , 2012 custom fit vehicle wiring by Tekonsha are available from etrailer.com. For expert service call 1-800-940-8924 to order your T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part number 118425, or order online at etrailer.com.
  • All Info
  • Reviews (363)
  • Q & A (0)
  • Photos

Tekonsha Custom Fit Vehicle Wiring - 118425

  • 4 Flat
  • Trailer Hitch Wiring
  • Custom Fit
  • No Converter
  • Tekonsha

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily - no cutting or splicing of wires
    • Locate connection points behind tail lights
    • Plug in T-connector
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage: 7.5 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness. If extra length is needed, you can cut the zip tie on the passenger side harness.


T-One Connection Location Points Behind Tail Lights

Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.



118425 Tow Ready T-1 T-Connector - 4 Wire

Installation Details 118425 Installation instructions

California residents: click here


Customer Satisfaction Score:


Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118425

Average Customer Rating:  4.7 out of 5 stars   (363 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.

by:

Great service, products works great. Had to remove 1 zip tie to gain the length needed to get to both tail lights. Follow the path of the vehicle wiring and the wiring tucks nicely.

Jacob

5/13/2024

So far so good. No complaints after a year.



by:

The wring harness was very easy to install. It is working just fine after one year. I was careful upon installation to make sure no wires would hang down creating an opportunity to get snagged. We hunt with our vehicles so often time we will be in a harvested field driving.



by:
2012 Jeep Grand Cherokee

Perfect product and transaction all around!! Other reviews said wiring was a bit short but cutting a zip tie would help wire length. Worked perfectly. Install was a breeze and went just as smooth as the video provided for my Jeep. Also bought the trailer hitch as well. Installing both took less than 30 mins. If, like me, you were worried about quality because the price is so low. Worry not!!! The quality is there. The inflated price is not. Welds on hitch are good and powder coating is flawless. Wiring is plug and play. (pun intended) If your thinking about buying. STOP. Just buy it and you will be as pleased as I was. ~2012 Jeep Grand Cherokee~



by:
2012 Jeep Grand Cherokee

I ordered this harness for my Grand Cherokee and couldn't be happier. It came within a few days choosing economy shipping and the installation was ridiculously easy. There is even an online video with step by step instructions for this exact product. I completed the install myself in under 30 minutes. Did a brake/signal check and everything worked perfectly. Great product, great service. Very happy with this purchase.



by:
2011 Jeep Grand Cherokee

Very dissatisfied with the wiring harness. Way too short. A number of your reviews indicated that this. We had to splice a number of wires. Your solution was to cut the small zip ties on the wires. We did that. Still too short. Probably will not use this product again.`



by:
2009 Jeep Grand Cherokee

This is GREAT !
everything including
wiring harness was a perfect fit. It took me 1 hour and 15 min start to finish for install.
Well done Etrailer



by:
2009 Jeep Grand Cherokee

Everything fit as it should. The connectors could be a bit more sturdier. Very delicate plastic.



by:
2010 Jeep Grand Cherokee

Wiring harness was so easy to install, it took me less then 30 minutes to get it installed! Way cheaper then uhaul charges! Very happy.



by:
Jeep Grand Cherokee

It was super easy to install this trailer light setup on my Jeep Grand Cherokee. Works perfectly and have had no issues with it.



by:
2007 Jeep Grand Cherokee

Product was super easy to install I've sent a pic of the hitch installed my Jeep is a work in progress thank you for a great product.

Hugh

Hugh B.

3/25/2018

awesome love it!!!



by:

unit did not fit had to add wire so it would reach from tail light to the other. And this was the second harness I ordered the first one was totally wrong

Etrailer Expert

Jenny N.

11/8/2022

It can seem like that there is not enough wire in the harness. To get enough length, all you need to do is cut the zip-tie that holds the two halves together. Peel the bonded wire apart till you get enough length, then you can tie them back with a new zip-tie.



by:
Jeep

Buying from etrailer was very easy and got my order very quick. Website helped ensure that hitch and wiring fit my Jeep. The hitch looks really good and installation was simple. Definitely recommend etrailer!



by:

Hello Mr. George J (etrailer.com):
My
experience with etrailer.com was GREAT!!! I purchased a Draw-Tite Trailer Hitch Receiver, T-One Wiring Harness and Four Pole Bracket. Your website, instructions, sales, and shipping were Top Shelf!!!
Many thanks for the GREAT Service!!!!!!!!!!!!!
Sincerely,
Don D.
Waterford, Connecticut

Don D.

4/25/2018

Hope all is well with you and your team at etrailer!!! The three trailer items I purchased from your company are working GREAT!!! The items are of very good quality and they were priced appropriately. Also, thank you for continuing to send me product updates. Very helpful!!! Thanks for the Great Service!!!



by:
2007 Jeep Grand Cherokee

Good product with quality connections. My only negative comment is that the wiring could be about 2"-4" longer for my application (2007 Grand Cherokee). The wires were just too short in overall length and made the installation longer than it needed to be. I did get it in, but almost had to remove the rear bumper to make everything fit perfectly. All in the harness works great - install was just a pain as things were tight.

Andre F.

5/11/2016

Works fine - Couldve been 4 longer so it would give a smidge of slack. Pain to install



by:
2011 Jeep Grand Cherokee

The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118425 came exactly as advertised and installed exactly as shown in the instructional video. Great product, fast service and delivery, liked the email updates on shipping and delivery...

Max

7/31/2018

There has been no issues with the product...still working exactly as it did on the first day.



by:
2010 Jeep Grand Cherokee

The delivery was fast, took it less than a week to come in. This product was so easy to install. It took me an hour to put the hitch and wiring harness in my 2010 Jeep Grand Cherokee. I haven't got to pull anything with it yet but as of right now I think it's a good product.



by:

came 3 days early



by:

Have Jeep Grand Cherokee and have added an etrailer hitch. This wiring harness will complete the project allowing use of utility trailer. Like the fact that no wiring has to be cut or tapped to install. Perfect for my use.

Lanier

6/22/2020

Still works exactly as expected. Usage down during Covid-19 situation.



by:
Honda Pilot

Easy to install, works great. Suggestion: watch the video rather than use the included instructions, if possible. The instructions are fine, but the video shows where to route the wires through the bumper. After reading the suggestions in the reviews, I snipped one of the wire ties holding the two cable sets together to make sure I had enough cable length to stretch over to the passenger side. Make sure you have a couple of coat hangers or heavy wire to fish the wires through your bumper pipe. Even though person in the video was able to install the ground screw without drilling a pilot hole, I was not able to, so I needed to drill a pilot hole to get it started.

Todd S.

3/15/2015

The harness works great. I upgraded it to a round 7-wire harness with electric brakes. No need to discard this kit, it simply powers the lights while a new wire powers the brakes on the new 7-wire connector.



by:

Easy to install and works great on my j eep



by:
2012 Jeep Grand Cherokee

The product is very easy to install. For those with comments about the wires being too short to get to the passenger side, all you have to do is cut a zip tie on the harness and there is more than enough wire supplied. Installation took about 30 minutes and the video on the website is excellent. The shipping and notification procedures with e-trailer are great. It's a pleasure doing business with them.

Kyle

7/15/2014

Product is holding up very well. No issues whatsoever. Excellent all the way around. Would recommend without hesitation.



by:
2011 Jeep Grand Cherokee

The product quality is excellent, BUT the 2011 model year JEEP GC has changed. The wiring harness is to short! I had to add additonal wiring by cutting and splicing additional length.

This product needs to be upgraded to fit 2011 Jeep Grand Cherokee.

Etrailer Expert

Patrick B.

11/21/2012

To get enough length, all you need to do is cut the zip-tie that holds the two halves together. Peel the bonded wire apart till you get enough length, then you can tie them back with a new zip-tie.



by:
2011 Jeep Grand Cherokee

Found your website and thought it was awesome. Boy was i wrong. I ordered a wiring harness for my 2011 Jeep Grand Cherokee. Watched the video and it seems very simple and well thought out. Paid 25 dollars extra for overnight shipping so i could leave town for the weekend. Evidently Tekonsha ( supplier) doesnt know how to measure because the harness is too short. Customer service is a joke. She says someone may call me tomorrow. What good does that do. Im stuck and cant do the work i promised. Thanks etrailer. You suck.

Etrailer Expert

Laura E.

9/19/2017

Richard, if you snip one of the zip ties where the yellow and green wires meet, you can make the wiring just about as long as you need.



by:
2007 Jeep Grand-Cherokee

This was really easy to install, especially if you watch the video before installing. I chose to follow wiring that was already going across above the spare tire and tie wrapped to it. It tucks neatly away and I had plenty of wire. I do recommend cutting one of the existing ties to allow more cable.

Mike

1/23/2018

Product has been great no issues to date!



by:
2011 Jeep Grand Cherokee

It works grate very easy to hook up grate instructions I would recommend this product to anyone who needed a trailer hook up wire set. Order arrived ontime.very ?? happy with this product

David F.

5/30/2017

Grate no problems


25
363
Show More Reviews

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

  • Best Way to Add a 4-Flat and 7-Way Connector to a 2007 Jeep Grand Cherokee w/ out Tow Package
    I have a couple of wiring harnesses that will add a 7-way and a 4-flat to your 2007 Jeep Grand Cherokee. However, since you do not have the towing package the 7-way harness is going to need to be wired in. The first wiring harness you will need is the Tekonsha T-One Vehicle Wiring Harness item # 118425. This custom-fit T-One connector plugs into your Jeep's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. This will provide you with a 4-flat connector....
    view full answer...
  • 4-Pin Wiring Harness for a 2010 Jeep Grand Cherokee w/ out the Tow Package.
    Yes, we do sell a 4-pin wiring harness for a 2010 Jeep Grand Cherokee without the factory trailer package. It is the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118425. This custom-fit T-One connector plugs into your Jeep's wiring harness, which is located behind the tail lights. Some other parts you may need for towing are a trailer hitch item # e93AR is confirmed to fit your Jeep. I also recommend the Curt Towing Starter Kit for 2" Hitches item # C45534.
    view full answer...
  • Brake Controller for 2008 Jeep Grand Cherokee
    While we have not had a chance to install a brake controller on a 2008 Jeep Grand Cherokee we have installed them on other Jeeps of the same year, and the process will be similar. Assuming you do not have the factory tow package or factory 7-way on your Grand Cherokee you need to start with a 4-way connector, the T-One Vehicle Wiring Harness # 118425, and this is something we do have an installation video for on an '08 Grand Cherokee. You will also need the Universal Installation Kit...
    view full answer...
    Image 1 for
  • How to Make the Tow Ready Trailer Wiring Harness Long Enough to be Used on 2012 Jeep Grand Cherokee
    There is a pretty simple fix for the issue people have where it seems like the harness is too short. What you will need to do is cut the zip-tie that holds the left and right harnesses together and then pull the wires apart as they are bonded together. This will give you plenty of wire to make it to both taillights of your 2012 Jeep Grand Cherokee. If you check out some of the other reviews you can see that some people had success with this method too.
    view full answer...
  • Is there a Quick Connector Trailer Wiring Harness Available for a 2011 Jeep Grand Cherokee
    The T-One wiring kit, item # 118425, is a quick T-connector kit that installs inline with the vehicle taillight wiring and does not require splicing into the vehicle factory wiring. This connector will provide a 4-Way trailer connector at the rear of your 2011 Jeep Grand Cherokee. The hardest part about installing this wiring harness is accessing the wiring at the rear of the vehicle taillights. We have a video of the # 118425 Harness being installed on a 2007 model which will be very...
    view full answer...
  • Is There a 7 Way Connection That Uses T-Connectors for a 2011 Jeep Grand Cherokee
    I have a solution for you, but it sounds like you're looking for a 7 way connector that's installed using T-connectors, which does not exist. Additionally, since your 2011 Jeep Grand Cherokee does not have the towing package, you'll need to do some hard wiring to complete the installation of the parts required. In order to install a 7 way connector on your 2011 Jeep Grand Cherokee you'll need to start by adding a 4-way connector like the Tekonsha # 118425, which will tee into the tail...
    view full answer...
  • Parts Needed to Add a Brake Controller on a 2013 Jeep Grand Cherokee With or Without the Tow Package
    Since you don't have the trailer towing package on your 2013 Jeep Grand Cherokee you do need to start off by installing a 4-Way connector. I recommend the Tekonsha T-One # 118425 as we have found Tekonsha to be one of the most reliable wiring companies that we carry. To have 7-Way and 4-Way connectors on your Jeep you also need the Universal Wiring Kit # ETBC7. This connects to the T-One and give you both connections that you need. It also includes everything you need for the 7-Way to...
    view full answer...
    Image 1 for
  • Does Computer on 2011 Jeep Grand Cherokee have to be Reprogrammed to be Able to Tow
    One of my coworkers has a 2012 Jeep Grand Cherokee which is the same generation as your 2011. When we went to install a 7-Way trailer connector on it the vehicle did have to be reprogrammed by a Jeep dealer. The Jeep should have the wiring there to add a 7-Way but it would not be fully functional unless the BCM was flashed by a dealership. You will not have to do this if you were to add a 4-Way trailer connector. If you plan on doing some towing in addition to the trailer hitch, # C13065,...
    view full answer...
  • Trailer Hitch and Wiring Recommendations for a 2011 Jeep Grand Cherokee
    If your 2011 Jeep Grand Cherokee does not have the round factory plug behind the rear bumper for a trailer connector (see photo), then the parts that you listed will work. Before you proceed, I recommend checking for the factory trailer plug behind your bumper again because we found that Jeep included this plug on some models that did not have the factory tow package. If you have this plug, then you can use our Multi-Tow Trailer Connector, # 74682, instead of the 4-way wiring harness and...
    view full answer...
    Image 1 for
  • Parts Needed to Install a Trailer Brake Controller on a 2012 Jeep Grand Cherokee
    If your 2012 Jeep Grand Cherokee does have the factory brake controller plug and it is functional then you can use # TK93VR with brake controller # 90885. The factory plug should be located underneath the dashboard, to the left of the steering column taped to another wiring harness near the emergency brake pedal. I have linked instructions for you to view. If your Jeep did not come with the factory tow package (the 7-Way trailer connector was not included) then you would need to hardwire...
    view full answer...
  • Comparing Curt and Tow Ready Trailer Wiring for a 2013 Jeep Grand Cherokee without Tow Package
    Both the Tow Ready harness # 118425 and the Curt harness # C56009 install and function the same way on your 2013 Jeep Grand Cherokee without the factory tow package. They are just from 2 different manufacturers. I have linked videos showing example installations of both for you. I usually recommend Tow Ready over Curt because on harnesses with converter boxes the Tow Ready ones seem to be the more reliable option. But in this case there are no converter boxes so you could go either way...
    view full answer...
  • How to Iinstall a Brake Controller on a 2011 Jeep Grand Cherokee Overland
    To install a brake controller on the 2011 Jeep Grand Cherokee you will most likely have to hard wire. From the information I was able to obtain there is a brake controller connection point, but the connector is not available aftermarket. If a connector is supplied, it will be in one of two locations. The first is under the dash just to the left of the steering column. The second is behind the driver's side kick panel next to the emergency brake pedal. If you find the connector you will...
    view full answer...
  • Trailer Wiring Harness Recommendation for 2007 Jeep Grand Cherokee
    For trailer wiring confirmed as a fit for your 2007 Jeep Grand Cherokee we have the Tekonsha kit part # 118425 which is going to fit and work great. I attached an install video for this kit on a 2007 Grand Cherokee for you to check out as well.
    view full answer...
  • Adding a 4- and 7-Way Trailer Wiring Harness on a 2007 Jeep Grand Cherokee
    If your 2007 Jeep Grand Cherokee did not come with a factory installed 7-Way trailer connector then there will be know plug and play options for a 4- and 7-Way connector but you can hardwire in one using # ETBC7. If it did come with a factory 7-Way then you can use # 20135 which is both a 4-Way and 7-Way. If you decide to hardwire in an ETBC7 and you do not already have trailer wiring, you will first need to install a 4-Way using # 118425. Then you will go ahead with the ETBC7 installation....
    view full answer...
  • Trailer Hitch and Wiring Recommendation for 2012 Jeep Grand Cherokee
    For a hitch for your 2012 Jeep Grand Cherokee the Draw Tite hitch part # 75699 that you referenced would be exactly what you would need. To install a 4-way all you need is the part # 118425. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install...
    view full answer...
  • Wiring Needed for 2012 Jeep Grand Cherokee to Power Trailer Brake Lights and Turn Signals
    The Draw-Tite Class III Receiver Hitch, # 75699, is a great option for your 2012 Jeep Grand Cherokee. The T-One Vehicle Wiring Harness with Trailer Connector, # 118425, is the wiring that you will need to operate brake lights and turn signals on a trailer. This connector plugs directly into the existing wiring with no cutting or splicing needed. We also offer the Ball Mount, # C45010, 2-inch Hitch Ball, # 63845, or the 1-7/8 inch Hitch Ball, # 19260, that you may need to get you ready...
    view full answer...
  • Recommended Wiring Harness and Trailer Hitch for 2013 Jeep Grand Cherokee
    We do offer custom fit trailer wiring harnesses for your 2013 Jeep Grand Cherokee. Since you are also looking for a trailer hitch, such as the Curt Class III Receiver # C13182 that you referenced, it is likely that your Grand Cherokee does not have a factory towing package installed. In this case, I recommend the Tow Ready T-One Vehicle Wiring Harness # 118425. This wiring harness installs in line with the factory wiring behind the vehicle's taillight housings, and it will not require you...
    view full answer...
  • Recommended Trailer Hitch and Wiring for 2013 Jeep Grand Cherokee Laredo
    We have everything you need to set your 2013 Jeep Grand Cherokee up for towing. Starting with the trailer hitch, I recommend going with the Draw-Tite Class III Max Frame Receiver Hitch # 75699. This hitch is going to sit slightly further back from the rear bumper than the Curt model, making it a bit more hidden once installed. It will provide a 2 inch receiver opening and a 5,000 pound towing weight capacity, although you will still want to check the capacity of your Grand Cherokee as...
    view full answer...
  • Troubleshooting T-One Harness On 2010 Jeep Grand Cherokee With Intermittent Blinker
    Many times corrosion can cause problems like you are describing on your 2010 Jeep Grand Cherokee. A loose ground can cause intermittent problems as well. You want to make sure the ground wire is attached to a clean, bare metal surface. If you find green and/or white corrosion inside the connector, that will probably be what is causing the problem. You will need to clean this corrosion out and make sure the connections are secure. If you have it cleaned out and find it is working, I recommend...
    view full answer...
  • Trailer Brake Controller Installation on 2000 Chevy S-10
    Your 2000 Chevy S-10 is not prewired for a brake controller, but that's not a huge deal. The hardwire installation is actually pretty simple. To begin with, you'll need a functional 4 pin trailer connector. If you don't have one already, you can easily install one using part # 118425 which installs inline at the connection between the vehicle's taillight wiring harness and taillight assemblies. For a brake controller, I'm not a huge fan of the Voyager brake controller. Don't get me wrong,...
    view full answer...
  • Brake Controller Wiring on 2010 Jeep Grand Cherokee
    The 2010 Jeep Grand Cherokee is not pre-wired with a brake controller port for installation of a brake controller. To install a brake controller on your 2010 Jeep Grand Cherokee with a factory 7-Way you will need to do a little hard wiring. The only wire Jeep provides is the electric brake output wire that goes back to the 7-Way trailer connector. This wire is probably a light green wire that is behind the cab in the fuse box. It will connect to the blue wire on the brake controller. You...
    view full answer...
  • Does a Factory Installed 7-Way on a 2007 Jeep Grand Cherokee Require a Fuse or Relay to Activate
    If your 2007 Jeep Grand Cherokee came with a factory installed 7-Way wiring harness, it probably does have the 12-volt wire already attached and ready for use. You can check the pin on the 7-Way in the 1 oclock position if facing the connector. Use a circuit tester like # PTW2993 to check for voltage. On some vehicles you will need to have the key on, or the vehicle started. If you find that it does not show voltage, it could be that there is a fuse or relay that needs to be installed....
    view full answer...
  • Trailer Hitch Recommendation for a 2012 Jeep Grand Cherokee SRT8
    The Draw-Tite # 75699 that you referenced has been confirmed to fit the 2012 Jeep Grand Cherokee SRT8 so it should work very well for you. I attached an install video for this hitch for you to check out also. To complete your towing setup you may also be interested in the following products: Trailer Wiring Harness # 118425 etrailer.com Ball Mount Kit # 989900
    view full answer...
  • What is the Difference Between CURT Class III Trailer Hitches for a 2011 Jeep Grand Cherokee
    The main difference between CURT Trailer Hitch C13075 and # C13065, is the cross tube. On C13075, it has a round tube and the receiver extends straight out from the side of the tube. This requires a bend in the cross tube which makes more of the hitch visible beneath the vehicle. Hitch # C13065 has a square cross tube. The receiver is welded to the bottom of the square tube and this makes only the receiver visible beneath the rear of the vehicle. The rest of the hitch is hidden behind...
    view full answer...


< Previous
123. . .6



Do you have a question about this Custom Fit Vehicle Wiring?


Info for this part was:

Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Lori W
Expert Research:
Lori W
Employee Nicholas E
Test Fit:
Nicholas E
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Cole B
Installed by:
Cole B
Employee Chris R
Video by:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.