To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Universal-fit light bar adds style and flair to your ride with high-intensity red and white LEDs. Quick, simple installation with 3M tape. Just plug into your truck's 4-way trailer connector. Splicing is required only for reverse lights.
Features:
Specs:
This light bar is built using surface-mount technology (SMT). This method of construction involves soldering LEDs directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability, and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And when would vibration be more likely to occur than when you are driving?
Waterproof Construction
The LEDs on this light bar are suspended in clear urethane for maximum protection from the elements. This protective coating helps to fully seal each diode - and the light bar as a whole - to create a waterproof system for your truck.
Average Customer Rating: 4.9 out of 5 stars (67 Customer Reviews)
Universal-fit light bar adds style and flair to your ride with high-intensity red and white LEDs. Quick, simple installation with 3M tape. Just plug into your truck's 4-way trailer connector. Splicing is required only for reverse lights.Happy with the result. Looks very well made and I hope will withstand rain and snow of upcoming winter. Plugged perfectly into the 7 to 4 Pole adapter that I ordered with it. Had to use an sharp blade to remove a lip on the bumper cover in order to make it fit and viewable under the tailgate. Decided not to tie in the backup lights, but all other features work perfectly. Packaging was a little shakey. Looks like both ends had to be retaped by UPS.
nice product but not sure I would buy again. The hole to lower my spare is in the way and placing the strip above it puts it out of sight. Still get light from them but just not the same. Also I didn't want to plug them into my trailer plug. I wanted them direct wired. I wouldn't do that again. None of the color coding on my Ram matched anything I could find online or in the manuals or the same colors on the light bar. Nothing against the light bar. It would look nice if I could put it where it was intended to go.
due to spare tire cranck hole it wouldnt fit under the tailgate. i just put on the bottom of the tailgate. works fine now.
Have hubby light bar today for birthday, he's thrilled! Assured him install is easy, very happy.
Love the light strip, looks great on my oversize load sign.
this light was worth the money and worked and performed as advertised
Product was delivered fast and packed well , great service ,will use them again
Great product. Great company to buy fro m.
Just what I wanted to add lightning to back with A Tommy Lift.
Easy install
Installed the light bar on my mini camper for safety and visibility one year ago. It continues to function 100% and looks great. Very pleased with this and every purchase experience I have had with etrailer.
Very nice, like that it is not really visible unless lights are on.
It is possible to install without removing tailgate ! Did it today is less than an hour.
There is a slight gap visible f try om top where piece overlaps a sheetmetal seam on each side, that is not even. To be safe, I applied clear silicone sealant on topside where these gaps are obvious. Also where tailgate harness passes thru middle opening, there was a slight gap to tape, so sealant was also applied in that area to prevent water seepage behind seal of lightbar unit.
It really lights up the back of the truck, and is very unobtrusive when not activated. Love the extra safety is provides at night and in inclement weather.
Product is easy to install. I could not use the 4 prong adaptor that came with the bar and spliced the wires into my harness. Light bar is a good add on to my cargo trailer. Have used it a night yet but the LEDS seemed bright during the day.
I am using this as a light bar for my hitch mounted bike rack bc the bikes block the brake lights and turn signals. It is very bright and so far works well. I use Velcro straps to connect it to the last bike on the rack.
I marked it excellent,assuming all is OK as it usually is with your products. This is going to be a Christmas gift so will not be opened at the present time,and also is being sent to another State. I do not expect any kind of problem with the tailgate light. thank you.
I put tailgate lights on all my trucks. The last truck I switched to rampage brand and they were brighter and no lights burned out. So when I traded trucks there was no question to get the exact same one
Was easy to put on my 2013 Toyota Tundra looks good works great very good very bright do not know it under tail gate until you turn on lights stop or turn looks very nice
I needed to replace these pads as my old fasteners had worn out.The new ones restore a new fresh look but I had a little difficulty with one of the end fasteners on each pad continually popping back up but with a little "coaxing" took care of that.
Simple install with easy to read instructions. It took longer to clean the area on my truck then to put it in place and plug it in. The product was packed and shipped in a hard durable tube to protect the light bar.
Love the light bar. The reverse lights really help at night.
After 2 weeks I never received.
Etrailer made it right and sent me abother one, no questions asked.
Light bar is well made, and was shipped in its PVC tube, so no worries of damage. Plugged right in and works great!!! Awesome customer service from e-trailer, shipped quick and let me know where my order was at every step of the process. Great all the way around.
Do you have a question about this Vehicle Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.