Derale 34-Row, High-Performance, Stacked-Plate Cooler with -10 AN O-Ring Inlets - Class V
(0 reviews)
Price: $215.39
Derale 34-Row, High-Performance, Stacked-Plate Cooler with -10 AN O-Ring Inlets - Class V
Retail:$250.32
Our Price: $215.39
You Save: $34.93
Need help with installation?
Locate installers near meCustomers prefer these similar products
- All Info
- Q & A (0)
- Videos (1)
- Photos
Derale Transmission Coolers
- Stacked-Plate Cooler
- Heavy-Duty Truck
- With - 10 AN O-Ring
- Standard Mount
- 13W x 10-7/8T x 2D Inch
- Derale
13" Wide x 10-7/8" tall x 2" deep, superior heat exchanger improves the performance and increases the lifespan of your vehicle's engine or transmission with maximum efficiency.
Features:
- Prolongs life of engine or transmission
- Improves overall performance
- Prevents heat-related failures
- Facilitates heat transfer between high-pressure fluids with furnace-brazed aluminum construction
- Designed with 34 rows of 2" wide turbulator plates for increased capacity and more efficient cooling
- Works as either engine oil or transmission cooler
- Comes with built-in mounting brackets for easy installation
Specs:
- Inlets: -10 AN O-ring, female
- Overall dimensions: 13" wide x 10-7/8" tall x 2" deep
- Distance between inlets: 10"
- Mounting dimensions: 12-1/4" wide x 10-1/16" tall
- 1-Year warranty
Stacked-plate heat exchangers have long been considered the most effective type of oil or transmission cooler, primarily because of their increased surface area. Allowing fluid to spread out over this larger surface area decreases the time required for heat transfer to take place. As a result, plate coolers typically manage to cool a greater volume of fluid faster than tube-and-fin, or even plate-and-fin, varieties. Add to that the turbulator technology - whereby fluids are agitated continuously to not only facilitate heat transfer, but also to prevent any undesirable drop in pressure - and you have an absolutely superior cooling system.
53478 Derale Stacked Plate Cooler
Item # D53478
Video of Derale 34-Row, High-Performance, Stacked-Plate Cooler with -10 AN O-Ring Inlets - Class V
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Derale Transmission Coolers - Class V 34-Row High-Performance Stacked-Plate - D53478
Hi everybody. Andy here with etrailer.com and today we're gonna take a brief look at this Derale Class V 34-Row High-Performance Stacked-Plate Cooler. This superior heat exchanger is going to prevent heat related failures and increase the life of your vehicle's transmission, improving the overall functioning and performance. Now, stacked-plate heat exchangers have long been considered to be the most effective type of oil or transmission coolers primarily because of their increased surface area, allowing fluid to spread out over this larger surface area decreases the time required for heat transfer to take place. So as a result, plate coolers typically manage to cool a greater volume of fluid faster than tube and thin or even plate and thin varieties. Add to that, the turbulator technology where fluids are agitated continuously to not only facilitate heat transfer but also to prevent any undesirable drop in pressure.
And you have an absolutely superior cooling system. Now this cooler facilitates the heat transfer between high pressure fluids with a furnace brazed aluminum construction. It's designed as I mentioned, with 34 rows of two inch wide turbulator plates for increased capacity and more efficient cooling. Now this will work as either an engine oil or transmission cooler, and it does come with these built in mounting brackets for easy installation. Now the inlets are -10 AN O-ring female.
And on your screen I am including a rough diagram of this cooler with the dimensions that are gonna be important to you. The overall dimensions there are, this is 13 inches wide and 10 and 7/8 inches tall and two inches deep. The distance between the inlets center to center are 10 inches and the mounting dimensions are 12 and 1/4 inches wide and 10 and 1/16 inches tall. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you.
Again, my name is Andy. Thank you for joining me..
0
0
See what our Experts say about this Derale Transmission Coolers
- Transmission Cooler and Fan for a 2004 Honda OdysseyThe Tube and Fin style is the original way oil and ATF coolers were designed, so they will be the least efficient of the 3. The Plate and Fin will be the most efficient of the base style coolers for standard vehicles. They offer very good cooling properties and are generally smaller in size. I suggest using # D13503. The Stacked Plate style is the most effective style of cooler, but is generally used on larger vehicles and or work trucks. You can use # D53478 with the adapter # D98203,...
view full answer...
Info for this part was:
Updated by:
DeAnne T
Updated by:
Adele M
Updated by:
Daron K
Updated by:
Carrie F
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.