bing tracking image
  1. Transmission Coolers
  2. Derale
  3. Tube-Fin Cooler
  4. Mid-Size Truck
  5. SUV
  6. Van
Derale Series 7000 Tube-Fin Transmission Cooler Kit w/ Hose Barb Inlets - Class III - Standard

Derale Series 7000 Tube-Fin Transmission Cooler Kit w/ Hose Barb Inlets - Class III - Standard

Retail:$61.32
Our Price: $57.41
You Save: 6%
Transmission Coolers
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
16-5/8" Wide x 7-5/8" tall x 3/4" deep, high-quality, tube-fin heat exchanger improves the performance of your transmission and keeps it running longer. Premium tube and fin cooler with copper tubing and aluminum fins. Great Prices for the best transmission coolers from Derale. Derale Series 7000 Tube-Fin Transmission Cooler Kit w/ Hose Barb Inlets - Class III - Standard part number D13103 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (25)
  • Q & A (0)
  • Photos

Derale Transmission Coolers

  • Tube-Fin Cooler
  • Mid-Size Truck
  • SUV
  • Van
  • With 11/32 Inch Hose Barb Inlets
  • 16-5/8W x 7-5/8T x 3/4D Inch
  • Derale
  • Standard Mount

16-5/8" Wide x 7-5/8" tall x 3/4" deep, high-quality, tube-fin heat exchanger improves the performance of your transmission and keeps it running longer. Premium tube and fin cooler with copper tubing and aluminum fins.


Features:

  • Improves functioning and overall performance of transmission
  • Extends life of transmission and prolongs period between necessary fluid changes
  • Cuts down on heat-related failures
  • Has built-in turbulators that agitate fluid for more efficient cooling
  • Designed with copper tubing expanded into aluminum fins for maximum heat transfer
    • Copper is the best material for conducting the heat out of the fluid, while aluminum is ideal for transferring and dissipating that heat
  • Protected from possible damage during installation by plastic fin guards and powder coat finish
  • Includes:
    • High-temperature, OEM spec hose with stainless steel clamps
    • Nylon mounting rods with pads
    • Bendable, metal mounting brackets
    • Insta-dapt radiator adapter
    • All necessary hardware
  • Recommended for mid-size cars, trucks and SUVs
  • Made in the USA


Specs:

  • Inlets: 11/32" hose barb
  • Overall dimensions: 16-5/8" wide x 7-5/8" tall x 3/4" deep
  • Core length: 13-3/4"
  • Distance between inlets: 6-1/4"
  • 1-Year warranty


Note: The Derale Insta-dapt radiator adapter fits most vehicles with 5/16" transmission lines, but not all. In some cases, additional fittings or alteration of the OEM lines or hoses may be required for installation.


Perhaps the simplest type of heat exchanger, the tube-fin effectively cools a variety of automotive systems. The concept is simple: Fluid cools as it travels through the core by transferring heat out to the fins. The fins then provide the surface area necessary for sufficient heat exchange to take place, allowing the heat pulled from the fluid to dissipate into the surrounding air. Add to that the unique turbulator technology - whereby fluids are agitated continuously to not only facilitate heat transfer, but also to prevent any undesirable drop in pressure - and you have an easy and effective cooling system.

Dimensions

13103 Derale Series 7000 Tube-Fin Transmission Heat Exchanger with Installation Kit
Hidden Hitch # HH41013
Hayde Automotive # 404

Item # D13103

Installation Details D13103 Installation instructions




Customer Reviews

Derale Series 7000 Tube-Fin Transmission Cooler Kit w/ Hose Barb Inlets - Class III - Standard - D13103

Average Customer Rating:  4.6 out of 5 stars   (25 Customer Reviews)

16-5/8" Wide x 7-5/8" tall x 3/4" deep, high-quality, tube-fin heat exchanger improves the performance of your transmission and keeps it running longer. Premium tube and fin cooler with copper tubing and aluminum fins.

by:

"02" F250 7.3 Super Duty I found the service from etrailer to be very satisfactory. The product arrived in good shape and on time. The on-line video was very helpful. Installing went smooth with one exception. As mentioned in many other on-line reviews, there was not enough hose supplied with the unit. While I had not problem with needing to purchase a small amount of hose, the package indicated that it was to be 5/16" ID. While the supplied hose was made in China and the walls of that hose where very flexible, the Gates hose, (made in the USA) was very rigid and would not go on the stud of the cooler, requiring a second trip to the Auto parts store to purchase 4' of 3/8" hose. A 12 mile round trip. Also, required the purchase of a knurled ended 5/16" hose connection and on qt. of tyranny fluid. Total added cost of $20.20. Have not towed with it installed yet.



by:

This is my 1st after market trans cooler and i was always under the impressuon to get the biggest one that will fit. This is the biggest one without any modification. Easy install installed between a/c confessor and existing stock trans cooler bracket. I bypassed the engine radiator all together so I'm running 2 coolers the stock one and D13105. It's installed on a lifted with 35in tires 2012 silverado 6.2l 4x4 6l80 trans with the tow package. It's May 22 and 93 degrees the avg every day running temp before install was 193 now my running temp is 142, I ccouldn't believe how much of a difference the cooler made. I haven't tried it in 4x4 yet but I'm sure it's going to be just as good. This coming weekend is memorial day so I'm planning a weekend on the beach going to do some off road 4x4 and for sure pulling some stuck people out of the sand. If i can post and update of temps from the weekend I will .



by:

Transmission cooler was a little larger than I needed I should've gone with a smaller one .had trouble fitting it in the suburban but we modify The suburban made it work. There was not enough transmission hose. So if you're install it in large vehicle need to get extra hose ,extra clams and tie wraps. Overall the transmission cooler works great and transmission is about 20° cooler.



by:

Used as replacement for primary transmission cooler. Seemed to keep transmission cooler, but really noticed a difference after adding a slim line fan to the combination. Etrailer products and customer service always top notch.



by:

Product arrived as described. I have not installed yet because i see that i will need some additional hose, and the vehicle specific adapter for the radiator trans cooler. I bought this unit for my 2001 dodge ram 1500 in preparation for a cross country drive that i would be pulling a trailer. My truck was a gift but it has 151,000 miles on it and everything is original equipment. It still runs strong I want to keep it running as long as possible. I'm sure I will have to replace the transmission at some point, but if this small investment can keep me going for a few thousand extra miles I'm going to be happy.



by:

Nice quality. Very effective. Installed on '08 Chrysler Town & Country van with 3.8L engine. Thought website difficult to decipher best product for my application. Had to buy [online] a pair of couplers for the 11/32nds ID hose supplied (used to splice into tranny line (cost about $6). Should have been supplied.



by:

The Transmission Cooler Kit was exactly as described. Installation was easy. It seems to be performing well.



by:

The hoes that came with the kit was not long enough. other than that everything was fine.I also purchased radiator adapter fitting which I did not need



by:

delivered as ordered, on time. helpful vidio for install on my truck. I would order this product again .product should come with more hose and clamps.



by:

Nice Cooler! This is the max size you can fit on Suburban/Tahoe 2007-2014.
My transmission is not overheating any more.
Thanks!



by:

Great product easy to install by watching video



by:

Quality product. Great price. And timely delivery. Always pleased with my purchases from etrailer.



by:

OK. Mounting tabs would be nice.



by:

Easy install on my 2007 Toyota Tacoma.



by:

Easy install other than I needed to buy more hose to hook inline with my existing cooler. It took all but 6" just to get to a tranny line then another 3ft to reach cooler.



by:

excellent and fast shipping but a time to we install the cooler the hose is not enough for the complete setup. I will have to buy more hose in another local store



by:

Alway good prices and fast service and they have saved me time looking for items i needed. Never hesitate to order from them! AAA+++



by:

World class customer service. I will instal the part in the next few days but, super happy with the service and attention.

Thanks



by:

product working very well .Installed it my self



by:

Easy to install & perfect for what I ne ed.



by:

Product came in good condition, only a few bent fins, most likely from the manufacture. Your box was in good shape.



by:

Fast shipping… installed it the same day it came perfect fit



by:

Thank u we got it great time and was happy with it all...



by:

I thought it came with the hoses as wel l.



by:


25
25

See what our Experts say about this Derale Transmission Coolers

  • Where is the Best Location to Install a Transmission Cooler on a 1975 Chevy Pickup Truck
    There are essentially 3 places you can potentially install the Derale Series 7000 Tube-Fin Transmission Cooler Kit, # D13103, on your 1975 Chevy. The most efficient place would be in front of the A/C condenser core (if applicable). The second most efficient place would be directly in front of the radiator. The least most efficient place would be behind the radiator. It all comes down to how much space you have available in those locations. Between the two options you have listed, I would...
    view full answer...
  • Recommendation for a Transmission Cooler for a 4 Cylinder 2009 Toyota Highlander
    You can install a transmission cooler on your 2009 Toyota Highlander, even though the ones recommended are for the larger 3.3L engine. Because you have the 4 cylinder model that does not come up in the fit guide, I spoke with my contact at Derale for some recommendations. Take a look at the Derale Series 9000 Plate-Fin Transmission Cooler Kit with NPT Inlets - Class IV - Extra Efficient, # D13613. You will just need to make sure the fittings on your Highlander match the fittings included...
    view full answer...
  • How Are Coolant Lines Run When Installing Transmission Cooler
    I have attached a drawing that shows how the transmission cooler lines are routed. You have a line that runs from the transmission and sends the hot fluid to the radiator. There is anoth er line that runs from the radiator after it is cooled back to the transmission. When you install a summplemental cooler like part # D13103 you use the line that normally runs back to the transmission from the radiator and route it to the new cooler. You then run a line from the new cooler back to the...
    view full answer...
    Image 1 for

Do you have a question about this Transmission Cooler?


Info for this part was:

Employee DeAnne T
Updated by:
DeAnne T
Employee Wilson B
Updated by:
Wilson B
Employee Daron K
Updated by:
Daron K
Employee Michael H
Expert Research:
Michael H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.