Derale Series 7000 Tube-Fin Cooler Core w/ AN Inlets - Class IV - Standard
(25 reviews)
Price: $57.99
In Stock
Derale Series 7000 Tube-Fin Cooler Core w/ AN Inlets - Class IV - Standard
Item # D13314
Retail:$126.53
Our Price: $57.99
You Save: 54%
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (25)
- Q & A (0)
- Videos (1)
- Photos
Derale Transmission Coolers - D13314
- Tube-Fin Cooler
- Full-Size Truck
- SUV
- With - 6 AN Inlets
- Standard Mount
- 17-1/2W x 10-1/4T x 3/4D Inch
- Derale
17-1/2" Wide x 10-1/4" tall x 3/4" deep, highest-quality, tube-fin cooler improves the functioning and longevity of your vehicle's transmission, power steering or fuel system.
Features:
- Improves functioning and overall performance of transmission, power steering or fuel system
- Prevents heat-related failures
- Has built-in turbulators that agitate fluid for more efficient cooling
- Designed with copper tubing expanded into aluminum fins for maximum heat transfer
- Copper is the best material for conducting the heat out of the fluid, while aluminum is ideal for transferring and dissipating that heat
- Protected from possible damage during installation by plastic fin guards and powder coat finish
- Recommended for full-size cars, trucks and SUVs
- Made in the USA
Specs:
- Inlets: -6 AN
- Overall dimensions: 17-1/2" wide x 10-1/4" tall x 3/4" deep
- Core length: 13-3/4"
- Distance between inlets: 8-3/4"
- 1-Year warranty
Perhaps the simplest type of heat exchanger, the tube-fin effectively cools a variety of automotive systems. The concept is simple: Fluid cools as it travels through the core by transferring heat out to the fins. The fins then provide the surface area necessary for sufficient heat exchange to take place, allowing the heat pulled from the fluid to dissipate into the surrounding air. Add to that the unique turbulator technology - whereby fluids are agitated continuously to not only facilitate heat transfer, but also to prevent any undesirable drop in pressure - and you have an easy and effective cooling system.
13314 Derale Series 7000 AN Tube-Fin Heat Exchanger Core
Video of Derale Series 7000 Tube-Fin Cooler Core w/ AN Inlets - Class IV - Standard
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Derale Transmission Coolers - Tube-Fin Cooler - D13314
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Derale Series 7000 8-Pass Tube-Fin Cooler Core with the AN Inlets. Now this tube-fin cooler is the simplest type of heat exchanger. It'll effectively cool a variety of automotive systems. And this part number here is for cooling of your transmission fluid or power steering fluid. Now basically the concept is pretty simple.
The fluid cools as it travels through the core by transferring heat out to the fins. And then the fins provide the surface area necessary for sufficient heat exchange to take place. Allows the heat pulled from the fluid to dissipate into the surrounding air. This one here has built-in turbulators that'll agitate the fluid for more efficient cooling. And this is a larger cooler.
They could call it an 8-pass cooler, which basically means the fluid will pass through the fins here eight different times. This part is recommended for full-size cars, trucks, and SUVs. It is designed with half inch copper tubing, which expands into the aluminum fins for maximum heat transfer. Copper is the best material for conducting the heat out of the fluid. While the aluminum is ideal for transferring and dissipating that heat.
It is very quick, easy and effective. Prevents any heat related component failures. And what's nice on this edge, and right here on this edge, they have these plastic fin guards, which will provide protection from the sharp fins during installation. This part is made in the USA. Few specs, again, the inlets on this end right here, they're a size minus six AN.
The overall dimension, if we measure from this end all the way out to this end. So if we put a ruler on that, you can see it's gonna be right at 17 and a half inches wide. The overall height on it is gonna be right at about 10 and a quarter inches tall. The depth of it is only about three quarters of an inch deep. Now just the core, which is measured from here to here, that's gonna measure right at 13 and three quarter inches. And then the distance between the inlets, so the two inlets, one right here, one right here, If we go center-to-center on those, is gonna be right at eight and three quarter inches. But that should do it for the review on the Derale Series 7000 8-Pass Tube-Fin Cooler Core with the AN Inlets..
Customer Reviews
Derale Series 7000 Tube-Fin Cooler Core w/ AN Inlets - Class IV - Standard - D13314
Average Customer Rating: 4.6 out of 5 stars (25 Customer Reviews)
17-1/2" Wide x 10-1/4" tall x 3/4" deep, highest-quality, tube-fin cooler improves the functioning and longevity of your vehicle's transmission, power steering or fuel system.by: Edward C.09/24/2017
"02" F250 7.3 Super Duty I found the service from etrailer to be very satisfactory. The product arrived in good shape and on time. The on-line video was very helpful. Installing went smooth with one exception. As mentioned in many other on-line reviews, there was not enough hose supplied with the unit. While I had not problem with needing to purchase a small amount of hose, the package indicated that it was to be 5/16" ID. While the supplied hose was made in China and the walls of that hose where very flexible, the Gates hose, (made in the USA) was very rigid and would not go on the stud of the cooler, requiring a second trip to the Auto parts store to purchase 4' of 3/8" hose. A 12 mile round trip. Also, required the purchase of a knurled ended 5/16" hose connection and on qt. of tyranny fluid. Total added cost of $20.20. Have not towed with it installed yet.
by: Ron05/23/2018
This is my 1st after market trans cooler and i was always under the impressuon to get the biggest one that will fit. This is the biggest one without any modification. Easy install installed between a/c confessor and existing stock trans cooler bracket. I bypassed the engine radiator all together so I'm running 2 coolers the stock one and D13105. It's installed on a lifted with 35in tires 2012 silverado 6.2l 4x4 6l80 trans with the tow package. It's May 22 and 93 degrees the avg every day running temp before install was 193 now my running temp is 142, I ccouldn't believe how much of a difference the cooler made. I haven't tried it in 4x4 yet but I'm sure it's going to be just as good. This coming weekend is memorial day so I'm planning a weekend on the beach going to do some off road 4x4 and for sure pulling some stuck people out of the sand. If i can post and update of temps from the weekend I will .
by: Robert barnes06/19/2015
Transmission cooler was a little larger than I needed I should've gone with a smaller one .had trouble fitting it in the suburban but we modify The suburban made it work. There was not enough transmission hose. So if you're install it in large vehicle need to get extra hose ,extra clams and tie wraps. Overall the transmission cooler works great and transmission is about 20° cooler.
by: Santos06/05/2016
Used as replacement for primary transmission cooler. Seemed to keep transmission cooler, but really noticed a difference after adding a slim line fan to the combination. Etrailer products and customer service always top notch.
by: joe03/26/2014
Product arrived as described. I have not installed yet because i see that i will need some additional hose, and the vehicle specific adapter for the radiator trans cooler. I bought this unit for my 2001 dodge ram 1500 in preparation for a cross country drive that i would be pulling a trailer. My truck was a gift but it has 151,000 miles on it and everything is original equipment. It still runs strong I want to keep it running as long as possible. I'm sure I will have to replace the transmission at some point, but if this small investment can keep me going for a few thousand extra miles I'm going to be happy.
by: Theodore06/28/2020
Nice quality. Very effective. Installed on '08 Chrysler Town & Country van with 3.8L engine. Thought website difficult to decipher best product for my application. Had to buy [online] a pair of couplers for the 11/32nds ID hose supplied (used to splice into tranny line (cost about $6). Should have been supplied.
by: Art W.07/31/2015
The Transmission Cooler Kit was exactly as described. Installation was easy. It seems to be performing well.
by: Adam Rivera07/25/2013
The hoes that came with the kit was not long enough. other than that everything was fine.I also purchased radiator adapter fitting which I did not need
by: Julia05/11/2020
delivered as ordered, on time. helpful vidio for install on my truck. I would order this product again .product should come with more hose and clamps.
by: Dylan05/29/2016
Nice Cooler! This is the max size you can fit on Suburban/Tahoe 2007-2014.
My transmission is not overheating any more.
Thanks!
by: Terry l. 05/17/2017
Great product easy to install by watching video
by: Don 06/12/2021
Quality product. Great price. And timely delivery. Always pleased with my purchases from etrailer.
by: Matt H06/19/2014
OK. Mounting tabs would be nice.
by: Gary01/30/2017
Easy install on my 2007 Toyota Tacoma.
by: Dave07/03/2013
Easy install other than I needed to buy more hose to hook inline with my existing cooler. It took all but 6" just to get to a tranny line then another 3ft to reach cooler.
by: good proce item03/17/2016
excellent and fast shipping but a time to we install the cooler the hose is not enough for the complete setup. I will have to buy more hose in another local store
by: Loren05/03/2019
Alway good prices and fast service and they have saved me time looking for items i needed. Never hesitate to order from them! AAA+++
by: Rafa08/21/2020
World class customer service. I will instal the part in the next few days but, super happy with the service and attention.
Thanks
by: Gerald Tompkins04/01/2020
product working very well .Installed it my self
by: Ryan 07/16/2022
Fast shipping… installed it the same day it came perfect fit
by: Jamie05/15/2015
Easy to install & perfect for what I ne ed.
by: Tim Hansen08/29/2011
Product came in good condition, only a few bent fins, most likely from the manufacture. Your box was in good shape.
by: Kimberley Meadows06/23/2016
Thank u we got it great time and was happy with it all...
by: Ben07/31/2021
I thought it came with the hoses as wel l.
by: Joshua 05/25/2021
25
25
See what our Experts say about this Derale Transmission Coolers
Info for this part was:
Updated by:
DeAnne T
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Daron K
Installed by:
Jeff D
Expert Research:
Jameson C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.