Triple-Axle Trailer Hangers for 2" Wide Slipper Springs - 4-1/4" Tall Front

Video Transcript for Redline Trailer Suspension - Leaf Spring Suspension - H302 Review

Today we're going to take a look at the Triple Axle Trailer Hangers for 2" wide slipper springs. These hangers are designed to suspend leaf springs from the frame of your triple axle trailer. These are designed for use with six leaf springs. Now the leaf springs we do sell separately on our website. These are designed to be used with an equalizer kit, part number AP302, or AP316 for a complete kit. Now those we do sell separately on our website, and the equalizer kits are what will include the equalizers, the bolts and the shackle straps for installing the springs to these hangers. This part includes everything shown here.

It includes the two 4 1/4" tall front hangers that have the 9/16 diameter bolt holes. The four 3 1/2" tall center hangers with the 7/8" diameter bolt holes, and then the two 5 1/4" tall rear hangers with the 5/16 diameter bolt holes. Now these hangers are designed for use on trailers with triple axles, 3,500 pound up to 8,000 pound axles. Now they do not include the components for mounting the axle to the springs. On the sizes, when they give you the sizes on these, what they're giving you, like on the front here, the front hangers, it's 4 1/4" tall front hanger. That measurement is from the center of the bolt hole to the top of the hanger, so if we get a ruler here, center to the top is going to be 4 1/4".

On the center, those are going to be 3 1/2", and same way, they'll measure from the center of the hole to the top of the hanger, 3 1/2" on all four center ones. Then the two rear ones, they're 5 1/4" tall. Same way if we go from the center to the top, 5 1/4". That should do it for the review on the Triple Axle Trailer Hangers for 2" wide slipper springs.