Hangers suspend leaf springs from the frame of your tandem-axle trailer. Designed to be used with either equalizer kit AP202 or AP216. Front hangers are 4-1/4" tall. Center hangers are 3-1/2" tall. Rear hangers are 5-1/4" tall.
Features:
When used with AP202:
Leaf Springs | A - Distance Between Front and Center Hangers | B - Distance Between Center and Rear Hangers | C - Distance Between U-Bolts | D - Distance Between Center of Axle and Trailer Frame | Axle Diameter |
---|---|---|---|---|---|
803T3, 1203T3, 1403T3 | 28-3/4" | 28-3/4" | 33-1/2" | 5-1/4" | 3" (typical 5,200-lb to 7,200-lb trailer axle) |
E5226 | 29-3/4" | 29-3/4" | 34-1/2" | 5" | 3" (typical 5,200-lb to 7,200-lb trailer axle) |
E5115 | 32-1/2" | 32-1/2" | 36-3/4" | 4-3/4" | 3" (typical 5,200-lb to 7,200-lb trailer axle) |
When used with AP216:
Leaf Springs | A - Distance Between Front and Center Hangers | B - Distance Between Center and Rear Hangers | C - Distance Between U-Bolts | D - Distance Between Center of Axle and Trailer Frame | Axle Diameter |
---|---|---|---|---|---|
803T3, 1203T3, 1403T3 | 30-1/2" | 30-1/2" | 36" | 5" | 3" (typical 5,200-lb to 7,200-lb trailer axle) |
E5226 | 31-1/2" | 31-1/2" | 37" | 5" | 3" (typical 5,200-lb to 7,200-lb trailer axle) |
E5115 | 33-3/4" | 33-3/4" | 39" | 5" | 3" (typical 5,200-lb to 7,200-lb trailer axle) |
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the Dexter Tandem-Axle Trailer Hanger Kit for two inch wide slipper springs. Now, this kit here will include two 4 1/4 inch tall front hangers, two 3 1/2 inch tall center hangers, and two 5 1/4 inch tall rear hangers, and this is for mounting your leaf springs to the frame of your trailer. Now, the mounting hardware used with this is not included, we do sell that separately. This kit also can be used with either the AP202 equalizer kit with the 10 1/8 inch long equalizers. I pop up an insert, that's that kit right there.
Or you can also use this with the AP216 equalizer kit that has the 13 1/8 inch long equalizers and hardware. Now, we do also sell complete kits, which will be these hangers with those kits I just mentioned. If you do it with the AP202 equalizers, that would be our part number AP202-H202, or if you use these hangers with the AP216 equalizers, that would be part number AP216-H202. And again, those items are all sold separately on our website. Now, this hanger kit is designed for use on trailers with tandem 3,500 pound to 8,000 pound axles.
This will attach four slipper leaf springs to your trailer frame. Now, the leaf springs are not included, again, those would be sold separately, but the parts here that are included, we're gonna show you the measurements on it. I laid them out, pretty much, this is the front, center, and rear. So the 4 1/4 inch tall front hangers right here, and when you measure the height of the hanger, it's not from the bottom to the top, it's from the center of the bolt hole to the top. So on this one, if we go center to the top, it's gonna get you your 4 1/4 inch height measurement.
The bolt hole size is 5/8 of an inch. On the center, if we measure that again from the center of the bolt hole to the top, about 3 1/2 inch height, and that has a 7/8 inch diameter bolt hole. And then the rear hangers, again from the center of the bolt hole to the top, is about 5 1/4 inches, and the bolt hole size on that is 5/16 of an inch. Now, this does not include components for mounting your axle to the springs. And one last note I do wanna mention, if you go to the product page of this product part number, and at the very bottom, there's a table, and it'll help you determine the hanger location when it's used with either set of those equalizers that we mentioned above, based on your type of leaf spring that's being used.
But that should do it for the review on the Dexter Tandem-Axle Trailer Hanger Kit for two inch wide slipper springs.
Average Customer Rating: 4.8 out of 5 stars (12 Customer Reviews)
Hangers suspend leaf springs from the frame of your tandem-axle trailer. Designed to be used with either equalizer kit AP202 or AP216. Front hangers are 4-1/4" tall. Center hangers are 3-1/2" tall. Rear hangers are 5-1/4" tall.These hangers work great. I upgraded axles on a trailer, and needed these to complete the upgrade. Etrailer has always been a great vendor, and the first place I go for trailer parts.
item is as described. We have it on an asphalt hot patcher, so it does get used quite hard. Wish it were just a little heavier.
The website site was very detailed, which made getting the right parts very easy, such as dimensions, load capacities, etc. also pictures were very clear of each product which was very helpful getting to the right product fast. prices were competative and 95% of the time cheaper. I will recommend etrailer to anyone i know with trailer needs. Arrival time of my parts was way sooner than expected, which is going to get me up and running for business sooner than expected. Great job to every department and everyone at etrailer!! Soon i will have before and after pictures of each product installed. Thanks etrailer.
Well made, good weld beads, but some of the spring perches could have used more weld. I added more in myself and am satisfied with it now.
These are tough and they fit perfectly!
As advertised - prompt shipment , good price. Will definitely check them for future purchases
Great Product at a fair price.
Almost an exact match to my originals. Look great
Do you have a question about this Trailer Suspension Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.