How to Determine Frame Width When Building Trailer with 7K Axles
Question:
Good morning Jon Thank you so much for providing the Info. My Apologies! I need the Dexter 7000 lb. Drop Axels Thanking you
asked by: Cedric J
Expert Reply:
I would be more than happy to help you get everything together that you need for the suspension on your gooseneck trailer for your tiny house!
It sounds like you're needing the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 95" - 7,000 lbs # 8327834-EB which has a hub face measurement of 95" and a spring center measurement of 80". This means that the frame of your trailer needs to be 80" apart so that your leaf springs will line up with your trailer suspension.
When it comes to the suspension we have a few different options for you. For a traditional setup you can use the 7-Leaf Spring for 8,000-lb Trailer Axles - # e37SR with the Triple-Axle Trailer Hanger Kit # H302 and the Equalizer Kit # AP316.. To replace the nylon bushings with bronze you'll also need 6 of part # D014-077-00.
For an upgrade to the traditional suspension setup we have the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers # RM-2460-2570-3. This comes with all of the hardware and parts that you need, plus it has the shock kit to help give your trailer much more of a smooth ride than a typical suspension system.
If you're only planning on moving the house a few times then I'd go with the standard suspension setup hands-down, but if you think you'll be moving your Tiny House fairly often the added benefits of the Roadmaster kit will help keep any stress down that your trailer would normally experience.
Good luck on your build!
Products Referenced in This Question
Dexter Trailer Axle w/ Electric Brakes - 4" Drop - E-Z Lube - 8 on 6-1/2 - 95" - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 7000 lbs
- 8 on 6-1/2 Inch
- 79-1/4 Inch Long
- 95 Inch Long
- Drop - 4 Inch
- Dexter
more information >
Triple-Axle Trailer Equalizer Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Trailer Leaf Spring Suspension
- Standard Equalizer
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- 13-1/8 Inch Long
- Triple Axle
- Redline
more information >
Bronze Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long - Qty 1
- Trailer Leaf Spring Suspension
- Bushings
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 9/16 Inch ID x 11/16 Inch OD
- 1-3/4 Inch Long
- Dexter
more information >
7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles - 26-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- Hook End
- 8000 lbs
- 2 Inch Wide
- 7 Leaf
- 26-5/8 Inch Long
- Painted
- etrailer
more information >
Triple-Axle Trailer Hangers for 2" Wide Slipper Springs - 4-1/4" Tall Front
- Trailer Leaf Spring Suspension
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- 5-1/4 Inch Tall
- Triple Axle
- Redline
more information >
Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Triple 7K Trailer Axles
- Trailer Leaf Spring Suspension
- Equalizer Upgrade Kit
- Leaf Spring Replacement System
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 7000 lbs
- Round Axle - 3 Inch
- Triple Axle
- Roadmaster
more information >
Product Page this Question was Asked From
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 95" - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 7000 lbs
- 8 on 6-1/2 Inch
- 80 Inch Long
- 95 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Shop: Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel - 5 on 4-1/2 - LR C
- Article: How to Tell the Weight Rating of a Trailer Axle
- Shop: Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Shop: Brophy Camper Scissor Steps - 3 Steps - Aluminum - Diamond Tread - 17" Wide - 250 lbs
- Shop: Brophy Camper Scissor Steps - 4 Steps - Aluminum - Non-Slip Tread - 24" Wide - 300 lbs
- Shop: Brophy Camper Scissor Steps - 2 Steps - Steel - Diamond Tread - 17" Wide - 275 lbs
- Shop: Brophy Tailgate Scissor Step Mounting Bracket
- Shop: Brophy Camper Scissor Steps - 3 Steps - Steel - Diamond Tread - 17" Wide - 275 lbs
- Q&A: Calculating Tire Capacity for a Trailer with a Tandem, Dual Axle
- Q&A: Can 7/16" U-Bolts be Used for 3,500 lb Axle Suspension
- Search Results: axle
- Search Results: demco coupler
- Search Results: hanger kit
- Search Results: trailer light kit
- Search Results: leaf spring
- Search Results: 5200 hub
- Search Results: leaf spring kit
- Video: Demco eZ-Latch A-Frame Trailer Coupler Review and Installation
- Video: etrailer Easy Grease Spindles Trailer Axle Beam Installation
- Q&A: How to Measure the Angle of Trailer A Frame To Determine if a 50 Degree A Frame Coupler will Fit
- Q&A: How Long is the Top Part of the Tandem Axle Jeep Style Trailer Fenders
- Q&A: How Tight Should Shackle Straps and Bolts Be Tightened On Trailer
- Q&A: What is the Torque Requirement for 1/2 Inch U-Bolts for Trailer Suspension
- Q&A: Appropriate Replacement Bolster Brackets for Trailer Carrying 3000-lb Boat/Motor
Cedric T.
10/22/2021
Good morning Jon Thank you so much for providing the Info. My Apologies! I need the Dexter 7000 lb. Drop Axels Thanking you