U-Bolt Plate for 3" Round Axle - 2" Wide Springs - 9/16" Bolts - Galvanized

Video Transcript for Redline Trailer Suspension 117521-G Review

Speaker 1: Today we're going to take a look at the galvanized U-bolt plate for three inch round axle with two inch wide springs. This U-bolt plate will act as part of your trailer suspension system. It's designed to help secure a 3500 pound, 6000 pound, or even a 7000 three inch diameter axle to a two inch wide leaf spring. It does require two 9/16 diameter U-bolts.To install this, we do sell them separately on our website and they are listed on this product page as a related product. This is a galvanized steel construction. It's heavy duty and corrosion resistant.

It's ideal for use on boat or snowmobile trailers. A few measurements on this, to mention the length of it you're going to be looking right at five and a half inches and right at four inches tall and it's about a quarter of an inch thick and the measurement from the hole, center to center this way, is going to be right at three and five eighths inches and this ray is right at two and five eighths inches.But that should do it for the review on the galvanized U-bolt plate for the three inch round axle with the two inch wide springs.