Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This completely hidden, custom-fit hitch installs behind your Subaru Crosstrek's rear bumper so that the cross tube is always out of sight. Receiver easily removes when not in use. Aluminum and steel alloy construction is durable and eco-friendly.
Features:
Specs:
The EcoHitch Stealth trailer hitch is designed to be completely out of sight when you're not towing. The hitch's cross tube bolts onto your vehicle's frame, behind your rear bumper. No drilling or welding is required. Once installed, the cross tube will be completely concealed and only the receiver will be visible beneath your bumper. But unlike other hitches with hidden cross tubes, the Stealth goes one further. You can remove the receiver portion of the hitch for a completely out-of-sight setup. To mount the receiver, just insert it up into the access port that is built into the cross tube. Secure the receiver to the hitch with the supplied bolt and washers. When you're done towing, just remove the receiver portion to return your vehicle to its clean, factory appearance.
With a combination of aerospace-grade aluminum, steel, and stainless steel, each EcoHitch is made of a strong metal alloy that will stand the test of time. The lightweight alloy is composed of recycled materials. Traditional steel hitch manufacturing can use coal or oil, which can contribute to harmful gas emissions. The EcoHitch's recycled materials limit the carbon footprint during manufacturing, so you get a sturdy trailer hitch while also helping the environment.
This EcoHitch trailer hitch is tested for durability and sturdiness. Using Finite Elemental Analysis (FEA), individual points of stress on the hitch can be detected and remedied. Designers can accurately test the hitch to ensure that it will meet or exceed SAE J684 standards. The EcoHitch Stealth trailer hitch is carefully researched and strength tested for a durable, high-quality hitch that can resist damage while on the road.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
No drilling required for installation , Exhaust must be temporarily lowered for installation
Complete Towing Package for 2024 Subaru Crosstrek
2024 Subaru Crosstrek Owners Who Purchased This Trailer Hitch Also Bought...
Popular Crosstrek Trailer Hitch Accessories
Average Customer Rating: 4.6 out of 5 stars (58 Customer Reviews)
This completely hidden, custom-fit hitch installs behind your vehicle's rear bumper so that the cross tube is always out of sight. Receiver easily removes when not in use. Aluminum and steel alloy construction is durable and eco-friendly.The hitch arrived fast but had multiple spots on it showing bare metal . Kinda felt that for $[XX], painting this shouldn’t have been my job. Install was easy.
Videos and accompanying "pull wire" made this hitch very easy to install. Love the hidden look when receiver is out and the perfect spacing when using hitch with my bike rack!
Mounted up very easy, I did it by myself with a box and a pillow. I knocked one of the bolts into the frame but was able to fish it back out with a magnet. Took about an hour. 10/10
Box arrived damaged and paint was scratched. Product appears to have previously been installed. I wasn’t aware I was getting a used item. More paint blemishes discovered upon further examination. Also photos appear to not upload properly and because I took them from the website they were never saved to my phone, so now I have no evidence of how damaged the box was when it arrived. The box seemed to be resealed and there is strong evidence that this was a used product. It appears that previous owner attempted to install only to realize improper fitment and returned the product.
Jenny N.
12/29/2023
Our hitches are new however it sounds like this hitch had a rough trip in the box. I will have our Customer Service team reach out to you. We can replace the hitch for you.
Seems nice shipped really fast but for the money you would think it be packaged better its scratch up but id like to use it this weekend so..
Jenny N.
4/13/2024
Sometimes it happens that the hitches are scratched in shipping either on its way to you or to us from the manufacturer. I will have our Customer Service team reach out to you. We can send out a paint kit to touch up the hitch.
The hitch was just as expected. Super easy to remove and once removed you wouldn't know the car had a hitch. The video installation doesn't show how to install the bolts but the instruction booklet that comes with the hitch explains it well. There is no cutting or filing required for a 2018 Subaru Crosstrek. It literally took me 45 minutes to install alone.
I had a problem with missing washers as UPS must have damaged the box and the washer bag was split open. Etrailer.com sent new hardware quickly. Very good customer service - they made things right.
I like the option I get to take off insert in case I need that extra clearance. However I NVR Had to take off and like option of stealth look. I use it on my crosstrek to pull a light weight kayak trailer.
Here is my 2019 Subaru Crosstrek with the Ecohitch Stealth Hitch installed.
Fits perfectly on my 2023 crosstrek, pretty simple to install, only takes about an hour. I would recommend finding a friend or an extra set of hands when mounting however, just for ease of lining up the bolts & not having them get shoved back inside the unibody while trying to align them with the holes in the hitch frame. Great product & recommended if you can afford the extra cost for the ability to remove the receiver when not in use.
When the hitch was finally installed, I was very happy with it. The removable receptacle makes the hitch truly hidden. The hitch is very solid. I plan to use it for bike racks and a basket carrier. The installation process for me took about 4 hours. Despite warnings one of the four bolts got knocked up inside frame. By putting super glue on my finger I managed the move the bolt near the hole and then used needle nose pliers to get it back in position. It would really help to have two people but I was solo. A second problem was that two on the bolts kept turning while trying to tighten them. Solved this my attaching a vice grip pliers to the end of the bolt. This allowed me finally tighten the nut so the bolt wouldn’t turn. The company was very prompt and kept me notified during the shipping process. The videos on the product page were also very helpful. I thought the cost of this hitch was rather high compared to the non-hidden one, but I do like the final look and function.
See previous
I love how easy it is to install by yourself. It's amazingly low profile when you remove the adapter.
What I said on the wiring kit pertains to this as well.
I received the hitch and proceeded with the installation, carefully reading the instructions. First, the instructions are written very poorly. In addition, the plate washers have a hole whose diameter is too small to fit the bolt attached to the fish tape they supplied. After opening a larger hole and installing the hitch. I am not able to tighten the bolts because the plate washers are loose inside the channel and as a result, the bolts cannot be tightened to the recommended torque indicated. I called etrailer and spoke to a Steve who did not know much about installing a hitch. He told me to call Eco Hitch. They apologized and, by the way, they are fully aware of the problem but yet they keep sending the hitches out with the defective parts. I will likely be sending the hole thing back (if I can remove it with the free wheeling bolts). I do not recommend this product.
Mike L.
9/14/2018
According to the engineering folks at EcoHitch, the best solution to this would be to use an impact wrench to run the bolts down. An impact wrench will spin the nuts more quickly than the bolts, allowing the nut and bolt to tighten up. Once the connection is snugged up, you can then torque the bolt as called for in the instructions.
I love this hitch. The only piece you can see is the actual hitch receiver - the rest is hidden. You can even remove the receiver if you want to maintain a clean look when its not needed. The hitch is very sturdy...I regularly use a heavy duty "One-up" bike carrier with 3 adult bikes - its stable and handles the load no problem. The only gripe I have (which appears to be a problem with every hitch I've ever owned) is that after one winter season, rust starts to form on the receiver. I combat this with lithium grease, but it just seems like they would have a better paint process to ensure that doesn't happen. The only other gripe I have is the installation was tricky...you need to thread some bolts into the chassis using a wire tool (provided). I made a mistake during the process and a piece fell off before i could thread it. With about an hour of trying different ways to recover, my 13 year old daughter was ultimately able to save me. That the price you pay for wanting a very low-profile hitch that isnt ugly.
Hitch was pretty easy to install, under 2 hours, but I would recommend having a second pair of hands. Test-fit all the bolts and washers before threading it through with the wire, because once you start, it might be near impossible to get them back out. I screwed the nut on each bolt just a little after I threaded each one just because I was worried about losing them. I could have done it solo, but a second pair of hands really helped with aligning the bolts without knocking them out of place.
When tightening the nuts, I had to use a crescent wrench and pull a bit on the bolt with some gloves on to get it to grip enough to tighten it the last bit without it freely spinning.
I only have used it with bike hitches and have had no problems with it.
Fairly easy to install, took me 1.5 hours . Best to have two people when securing bolts.
GET A PRO TO INSTALL. Not a do-at-home project! For one, the hitch is heavy, and to hold it up and be able to delicately align it with bolts is difficult, and should have a prop to allow you to gently move it into position. Second the bolts are a one-chance to install and if you accidentally push into the supporting frame you are out of luck, and not likely to be able to fish them out to try again. I now have three sets of bolts ringing round in my frame. Third, the muffler is a bear to remove and has FIVE mounts in the 2019 Subaru crosstrek, not three. And it too needs to be supported while you and the three other guys helping you hold up the rest.
But once installed, it’s a good hitch. Whew.
Great product. Took me a couple of hours to install by myself, mostly due to some hickups along with way.
One critical installation note omitted from the instructions: file the paint out of the holes in the large rectangular washers, otherwise the bolts will not fit through. I figured this out after I'd threaded the first bolt and washer up into the frame - it was not fun getting the washer back out of the frame! The bolts need to slide easily through the washers before installation.
Another tip, for those doing solo installs. Use bricks or boards or something to get the hitch close to the mounting position (my vehicle has 8 or 9 inches of clearance, so I didn't jack it up first). Then do what you must to get it into position and _omit_ the lower washers at first - just screw the bolts in by hand. Once all the bolts are in and the hitch is fixed to your vehicle's frame, back out the bolts one-by-one and reinstall them with the washers. This just makes the lift/screw in step much easier, as your hands may be full with everything else.
Product works perfect on my Crosstrek for my bike rack. Shipping was fast, I would order the hitch again from etrailer.
Really high quality and I like the fact that I can take off the bottom and keep slick look of not having a tow hitch.
I had it installed, but they said it was straight forward and easy to do for them.
Highly recommend.
Great product! However I have one question.
What is the part number for the 9/16” lock pin? in case I would like to lock the adapter.
Clayton O.
7/29/2021
Thanks for the review Wai-Hong, We dont have a locking pin for the the receiver tube opening because the bolt has to be tightened all the way down so there isnt play in the receiver tube opening.
Fit well, install was pretty straight forward. Has worked flawlessly thus far. Paying the huge premium just for the ability to remove the receiver when not in use was kind of painful, but glad I did as the car looks so much better without being able to see the tow apparatus when we're not using it most of the time.
Very well built hitch. Installed on my 2018 Subaru Crosstrek. Easy to install after watching a YouTube video and reading the instructions. I really like how it is hidden behind the bumper when I’m not using it. I would definitely recommend this hitch.
I have to say if it weren't for the installation video on the etrailer web site the installation could very easily have been a disaster. The illustrations for the install left a bit to be desired.
The product itself is fantastic I really like the fact that in just a few minutes the lower portion of the hitch can be removed and you would never know there was a hitch on the car.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
11/21/2023
I agree! I will have our customer service team reach out to you about this.