Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2"
Item # C15809
Retail:$764.53
Our Price: $376.30
You Save: $388.23
Confirmed to Fit
2012 Ram 3500
Pickup with factory hitch
Pickup without factory hitch
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (96)
- Q & A (0)
- Photos
2012 Ram 3500 - Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2"
- 2-1/2 Inch Hitch
- Class V
- 20000
- Visible Cross Tube
- CURT
- 2700
- 20000 lbs WD GTW
- 2700 lbs WD TW
- Custom Fit Hitch
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your Ram 3500's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2-1/2" x 2-1/2"
- Rating: Class V
- Maximum gross trailer weight: 20,000 lbs
- Maximum GTW when used with weight distribution: 20,000 lbs
- Maximum tongue weight: 2,700 lbs
- Maximum TW when used with weight distribution: 2,700 lbs
- Maximum gross trailer weight: 20,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
15809 CURT Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty- 2-1/2"
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
20,000 lbs.
Tongue Weight (TW):
2,700 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
20,000 lbs.
Tongue Weight (TW):
2,700 lbs.
Gross Towing Weight (GTW):
20,000 lbs.
Tongue Weight (TW):
2,700 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
20,000 lbs.
Tongue Weight (TW):
2,700 lbs.
Tech Tip
No drilling required for installation , Hitch is designed to fit beneath the OEM factory hitch , Requires factory bumper for installation
Complete Towing Package for 2012 Ram 3500
Retail:$1,211.48
Package Price:$853.40
2012 Ram 3500 Owners Who Purchased This Trailer Hitch Also Bought...
Popular 3500 Trailer Hitch Accessories
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" - C15809
Average Customer Rating: 4.7 out of 5 stars (96 Customer Reviews)
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Joe O.08/15/2018
2011 Ram3500
BEAST MODE ON! This thing is HUGE! I used to have a receiver integrated into a Ranch Hand bumper but found that massive bumper was only attached via the stock bumper brackets and we almost lost a 11k lbs trailer load recently. We upgraded to this massive CLASS V hitch and we are impressed. Super easy to install with a 2nd person.
My only complaint is it sits a little far back when used in combination with a Ranch Hand bumper such that the hitch was about 4" short of making it to the hole for the pin or for the pintle latch to open. So when you have a plasma cutter you simple just make it fit ;)
by: Tracy02/02/2024
Fit great I cut the crossbar off old hitch. I needed the old brackets to mount the bumper back. Lost a bolt trailer sent the whole mounting hardware thanks
by: John06/09/2024
The hitch is great. I was seeing my stock class IV hitch bend slightly when pulling a 14,000 lb dump trailer with my Ram 3500 SRW so I decided to upgrade.
The reason for 1 less star is the documentation; you need more information to make the best choice. I originally ordered a different PN and it hung way too low bc is mounted under the existing hitch. To remove the stock hitch, you also remove the integrated mounting brackets for the bumper. I ordered a PN for a truck without a hitch and cut off the receiver tube with a torch. Also, I upgraded the 3 1/2" exhaust to 4" and now at idle the exhaust rattles on the much larger frame of the class V but a slight modification in planned to take care of that. Installation was fairly straighforward once I removed the original receiver tube.
Very happy with the increased capability and safety with large loads.
by: Jeff 06/02/2024
2009 Dodge Ram Pickup
Looking through the internet for an addional class 5 hitch came across trailers. I asked a few questions about fitment so at order the correct hitch. I receive promt answers and ordered the hitch. It was delivered a day early in perfect condition. Give you 5 stars.
by: Kirk10/29/2023
2003 Dodge Ram Pickup
Very nice hitch receiver kit for my 2003 Ram 2500 HD. Very well manufactured and complete hardware kit. Took me almost two hours from start to finish by myself. Hardest part is raising the hitch into place by yourself and the bumper bracket welded nuts that interfere with the rear part of the mounting brackets (shown with white arrows). The installation instructions do mention this issue. To solve, I removed the three bolts each per bracket on each side. Raised receiver up at an angle and attached frontmost hardware loosely. Then jacked the receiver up with floor jack until just touching nuts. I then pried prybars between the bumper bracket and receiver mounting flange until the receiver would clear the nuts and jacked up to frame contact. Removed prybars and installed remaining hardware and shims as required. Fishing wires supplied in hardware kit made the install of the four carriage bolts a breeze. Just awaiting my new hitch now!
by: Lonnie 06/02/2024
This thing is extremely well built and heavy. Direction are ok, but I found it easier to put the plates and bolts in place before getting the hitch in the way. Other than that, install was pretty easy.
by: Jim 04/29/2024
Don’t hesitate to buy this if you’re looking for a heavy bumper pull it’s huge beefy I don’t have to worry about it
by: Anthony12/14/2023
One of the boxes was busted open and all of the pieces were falling out. Probably need to redo packaging on the torque lift camper tie downs. Very poor packaging
Jenny N.
12/14/2023
Oh no! I will have our Customer Service team reach out to you in case anything is missing.
by: Rick C09/14/2017
2003 Dodge Ram Pickup
Exactly as advertised, easy installation. I purchased this hitch to avoid spending well over a thousand dollars on a torklift system. The torklift system is awesome if your towing a community behind your truck, i am only towing my motorcycle. There doesn't seem to be much in between the extremes for hitches that accommodate hitch extensions. As fore warned by the etrailer staff this hitch did not allow the use of my standard Torklift camper tie-downs. So i had to modify the tie-downs and have some welding done to compensate for the modifications. I am very happy with the installation and believe the hitch and extension will allow me to tow my cycle trailer with zero issues. Thanks etrailer!
Rickc
9/14/2018
Great product. Meets my expectations and needs
by: James07/15/2022
Wow, now this is a heavy duty Hitch Receiver, I was very doubtful that I would be able to install this hitch by myself but with the right equipment on hand, a floor Jack and some large Jack stands I was able to lift it into place, secure all the bolts and tighten everything up. This all took me a little over an hour to complete but I did it. I’ve already hooked my 26’ Cargo Mate 12K GVW trailer to it. One thing I was a bit disappointed with was that the 10” drop I purchased earlier from etrailer is now too low and close to the ground, if I invert it, the ball will be too high. My air bags may give me the necessary clearance from the bottom of the drop to the ground so I may be ok for my 2,200 mile drive south. Great product thus far, additional review post drive. One other item that puzzled me was the 2 extra shims which I had to assume went between the forward receiver and the frame due to the space that was left from a weld point on the frame
Sierra K.
7/19/2022
This fits a variety of different Rams so #8 on the diagram in the instructions says to use as needed.
by: Jordan09/25/2022
Excellent hitch! I've had a 35' bumper pull camper that weighs nearly 10,000 lbs loaded down and I pulled my brother's 8,000 lb camper with it along with my 4,000 lb SXS and it keeps its shape. As long as you add the right amount of shims and tighten all bolts, you shouldn't have any complaints. I did have to trim my aftermarket bumper in order for me to get a ball on, but the bumper looks better now in my opinion.
by: John 04/22/2024
Super easy to install, you will need help lifting up to the bolts. Help is needed for 5 minutes or less. Took me 35 minutes working on the ground.
by: Larry 05/09/2024
The good thing about your product everything was there that I needed when I installed it
by: Richard02/17/2018
Dodge Ram Pickup
The hitch took a few days to ship once it got to the final shipping location the package was damaged and shipped back to etrailer (ups shipment fault not etrailer) without me ever seeing the box. I called etrailer and they shipped a new one out within minutes. Talk about awesome. It arrived in a few days unharmed. As far as installation on my Dodge Ram 3500 dually, it was pretty straight forward. There was one issue. The most forward bolt had to have a rectangle steel piece, that must be fished through the frame rail. This step was a nightmare and I ruined one of my telescoping magnets. Overall great product, heavy and the finish looks great.
by: George S.08/22/2019
Installation is easily done in 30 minutes in the driveway. Some maneuvering is needed to get the Curt receiver past the factory receiver mounting brackets. There is a clearance issue between the Curt receiver and a factory crossmember on both sides which can be remedied by adding a 3/4" grade 8 washer between the receiver and the frame on each side. It is easiest to torque down the four vertical bolts before installing the two horizontal ones as they interfere with getting a socket on the two rear vertical bolts. Curt did a good job eliminating all failure points (bolts) on the receiver hitch itself and the welds are solid. Overall the Curt receiver is overkill in a good way and it would be hard for even a good fabricator to design one that is stronger. Included are pictures of how it looks on a relatively tall factory height 2009 Dodge 3500 DRW with a 6" Fastway drop and 1220 pounds of tongue weight.
by: Rick06/26/2022
The only issue with the receiver hitch is that it dropped approximately 3" lower than the original hitch. Obviously a ground clearance and trailer hitch adjustment situation.
by: Jason 08/17/2023
Has held up great. Didn't care for two hitches, removed factory one. I use the Curt for everything.
by: Elmer 08/27/2023
Easy installation. Quality receiver hi tch.
by: John09/16/2020
2012Ram3500
Very strong hitch. Simple, straightforward installation. One person install with ratchet strap and floor jack.
by: Chris 03/20/2024
Easy install
by: Greg09/10/2020
2014 Jeep Grand Cherokee
Great hitch, fit right up underneath factory one on my 04 3500 dodge. Little bit hard to get bolts in, recommend having small retractable magnet to help pick them up or retrieve if you drop inside frame.
by: Stephen W08/18/2023
2014 Dodge Ram Pickup
Once again I received the excellent service that I have become accustom to from etrailer!
Thanks everyone!!
by: Kimberly 10/24/2023
It’s a great product easy to install and works very well. I would recommend it.
by: Harvey 10/18/2023
Awesome Produt he does what I needed to do and pull my equipment around
by: Cassidy06/18/2021
Build quality is good, install was basic. Look is awful, most of these I have installed replace the factory hitch and install tight to the bumper, this one hangs below the factory hitch and looks out of place on the pickup. I considered sending it back but shipping would have been half what I paid for the hitch,
Cassidy
6/19/2022
Hitch is working as it should, and I tow heavy daily. Hitch still looks terrible though. I get questions all the time asking whats wrong with it of if its broken. Operates perfect, just doesnt look that good.
Jenny N.
6/22/2022
You mentioned that the hitch looks terrible and I wondered if you were referring to how it appears under the factory hitch or if the powder coat has become scratched. For a 2009 Dodge Ram 2500 or 3500 with a factory hitch, there is a Draw Tire hitch part # DT45509 which requires the factory hitch to be removed. There is drilling required to install, does not fit cab and chassis 34 inch frames, only fits models with an 18 inch spare tire or smaller under the vehicle. Bigger tires will not be able to be stored under the truck. If the hitches powder coat is marred as will happen over time, I recommend touching it up with a rust resistant paint like Rustoleum.
Helpful Links
25
96
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Are Hitches Compatible Between 2003 Dodge Van and Dodge Ram 1500?Trailer hitches are custom fit for specific vehicle years, makes and models, and there are no hitches that are going to be compatible between a 2003 Dodge van and 2006 Dodge Ram 1500. The hitch that you referenced, Curt # C15809, is a fit for a 2006 Dodge Ram 1500 with or without a factory hitch, but will not work with any Dodge van. I have added a link to an install video of this hitch on a 2004 Ram for you to take a look at.
view full answer... - Trailer Hitch Recommendation for 2009 Dodge Ram 2500Hey Dolores, for your 2009 Dodge Ram 2500 we have the Curt hitch part # C15809 that fits and would work really well. It has great towing capacities and fits if the truck had the factory hitch or didn't have it.
view full answer... - Curt Class V Trailer Hitch for a 2006 Dodge Ram 2500 with Factory Trailer HitchThe factory trailer hitches on the 2006 Dodge Ram 2500s are welded on. You can add a Class V Curt hitch, # C15409 for a 2 inch receiver or # C15809 for a 2-1/2 inch receiver, and either will install beneath the factory hitch. I have linked videos showing example installations of these hitches for you. Trailer hitch # C15704 will not work because it was designed for truck models that do not have the factory hitch.
view full answer... - CURT Trailer Hitch # C15809 Recommendation for a 2012 Dodge Ram 3500Yes, this CURT Trailer Hitch # C15809 is confirmed to fit on your 2012 Dodge Ram 3500 Megacab. I attached installation instructions for you to check out also. You may also be interested in the following items to complete your towing setup: etrailer.com Ball Mount and Ball # EBMK25318 Draw-Tite Wiring # 119178KIT Pin and Clip # 37201065
view full answer... - Spring Mount Interfering with Fit of Curt Class V Trailer Hitch C15809 on 2006 Dodge RamI spoke with my contact at Curt, who tells me that some Ram trucks, even though they were manufactured as pickup trucks were assembled using the spring mounts from the cab and chassis trucks. The Cab and Chassis truck spring mount would extend below the bottom of the frame. Please take a look at the diagram I've provided showing what the spring mount SHOULD look like. If your spring mount extends below the frame, please let me know.
view full answer...
- Class V, 2-1/2 Inch Trailer Hitch and Long Extension to Clear In-Bed Camper in a 2006 Dodge Ram 2500If you were to use an extension such as # C45048 with Curt trailer hitch # C15809 on your 2006 Dodge Ram 2500 then it would be limited to 4,500 pounds at the 34 inch length. But at the 24 inch length it is rated for 6,000 pounds and a standard length ball mount would provide additional extension to clear the in-bed camper.
view full answer... - Towing Capacity of Curt Trailer Hitch Receiver C15809 Without a Weight Distribution SystemThe gross towing weight rating for the Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" part # C15809 is 20,000 lbs with or without the use of weight distribution. The tongue weight rating is also 2,700 lbs with or without the use of weight distribution according to Curt. You do want to make sure you are not exceeding the tow weight rating for your vehicle that can be found in the owners manual.
view full answer... - Does the Factory Trailer Hitch of a 2006 Dodge Ram 1500 Stay On to Install Aftermarket HitchThe factory hitch of your 2006 Dodge Ram 1500 has to stay on to install and use the Curt hitch part # C15809 that you referenced. You will need to install the bolts back through the hitch so that you can install the Curt hitch. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch...
view full answer... - Trailer Hitch For 2004 Dodge Ram 2500 w/ Factory Hitch to Allow 32-36 Inch ExtensionSo we do have one option for your 2004 Dodge Ram 2500 with a factory hitch that will allow you to add another hitch as well as an extension. Since there isn't an extension that fits a 2 inch hitch, what you'd have to do is add a 2-1/2 inch hitch and an extension, using the following parts: - Curt Trailer Hitch Receiver - 2-1/2" # C15809 - Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long # C45048 The Curt hitch will fit under your OEM hitch, and then the extension...
view full answer... - Can a Trailer Hitch be Installed on a 2006 Dodge Ram 2500 with Ranch Hand Bumper InstalledIf the ranch hand bumper is the same thing as a cowboy bumper or deep drop bumper then none of the hitches for the 2006 Dodge Ram 2500 are confirmed to fit because they are not tested on truck models with alternate bumpers. You would have to put the old bumper back on. If the factory hitch is the one welded to the frame then you would need # C15809 if you did install the factory bumper. This hitch fits below the factory hitch. I have linked instructions and a video showing installation...
view full answer... - Comparing Pintle Hook and Gooseneck for Towing With 2015 Ram 2500A pintle hook combo like the Curt Pintle Hook with 2-5/16" Hitch Ball # C45922 and a gooseneck are very different applications and generally aren't comparable because they require such different applications and configurations for both your trailer and truck. Assuming you have a truck that is set up for both, a gooseneck application will absolutely be the way to go because it will be a more cost-effective option and will give you better ride quality when towing. You didn't state your...
view full answer... - Class V Trailer Hitch that Will Fit a 2007 Dodge Ram 2500 with a Factory Installed Trailer HitchYou will not be able to remove the factory hitch on your 2007 Dodge Ram because it is welded and integrated into the bumper cross member which it welded to the truck frame. You would need to use a hitch that fits around the factory hitch. For a Class V hitch, you can use Curt # C15809. This hitch will also give you a 2-1/2 inch receiver and a capacity of 2,700 pounds tongue weight and 20,000 pounds gross trailer weight. I have included a link to the installation instructions for you....
view full answer... - Trailer Hitch with High Capacity Recommendation for 2011 Ram 2500 with Factory HitchYou'd have to check the factory hitch of your 2011 Ram 2500 for a capacity listed on it as it will be stated on it typically on a sticker. We have the Curt hitch part # C15809 which is a confirmed fit for your truck and has a capacity of 20,000 lb trailer towing and 2,700 lb tongue weight. You'd also want to check the towing capacity of your truck that's stated in the owners manual and be sure not to exceed this figure too.
view full answer... - Recommended Trailer Hitch Receiver for 2005 Dodge Ram 1500 Rumble Bee With Factory HitchFor your 2005 Dodge Ram 1500 Rumble Bee I recommend the Curt Trailer Hitch Receiver # C15809. This is confirmed to fit the Rumble Bee and designed to install below the factory hitch. If you want to remove the factory hitch you also have that option. This has a maximum gross trailer weight of 20,000 lbs so you won't have any problems with capacity.
view full answer... - Can I Use Curt Trailer Hitch Receiver # C15409 Same Time as the OEM Hitch on 2010 Dodge Ram 3500The hitch you have referenced, Curt Class V Trailer Hitch Receiver, part # C15809, is a 2-1/2 inch receiver, and can be installed along with an OEM receiver, on your 2010 Dodge Ram 3500. The towing capacity for this hitch is 20000 lbs, and it also has a tongue weight capacity of 2700 lbs. For this receiver I would recommend the Reese Ball mount, Part # RP45323. It has a towing capacity of 18000 lbs. I would also recommend Hitch ball, part # 63840, which has a towing capacity of 20000...
view full answer... - Will the Reese Hitch Extension RP45018 and Curt hitch C15809Yes, you can use a Titan Hitch Box Extension # RP45018 with the Curt Hitch 15607 that you referenced. The # C15809 is also confirmed to fit your 2008 Dodge Ram 3500 with a factory hitch. You should note the different capacities the # RP45018 has. If you use it at the full 48 inches of length it has a 4,000 lb capacity. Or if you cut it off to use it as a 41 inch extension you would have a capacity of 5,000 lbs.
view full answer... - Does Curt Hitch C15809 Fit w/Same Torklift Rear Camper Tie-Downs as Factory Hitch on 2003 Ram 3500For your 2003 Dodge Ram 3500 long bed dually with the factory installed trailer hitch you are likely using rear camper tie-downs # TLD3109. If you switch to a non-Torklift aftermarket trailer hitch you would need to use # TLR3500 for the rear tie-downs. This will be the case for any non-Torklift aftermarket hitch. If you did go with a Torklift aftermarket hitch such as # TLD1102 or # TLD1102-30 then you would still need different rear tie-downs, # TLR3503.
view full answer... - Curt Class V Trailer Hitch Compatiblity with 2015 Ram 2500 with 5 Inch ExhaustYou won't have any fitment issues with the Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" # C15809. I've attached a photo of this installed so you can see the exhaust fit with this hitch will allow plenty of room. I've attached a video of the installation on a 2014 model to assist. The TorkLift hitch has already been discontinued so it is no longer in our fit guide. I do not know the reason why it was discontinued as that wasn't disclosed to us. If it were...
view full answer...
- Recommended Upgraded Trailer Hitch for a 2015 Ram 2500The trailer hitch I recommend for a 2015 Ram 2500 Short Bed is the Curt Trailer Hitch Receiver part # C15409 for 2" or part # C15809 for 2-1/2". The Curt Trailer Hitch will fit models with the long bed or short bed, models with or without the factory trailer hitch, as well as models with the gas or diesel engine. The Curt Trailer Hitch also offers a bolt-on installation. In regards to weight capacity, these options will both exceed the vehicles capability so there should be no worries here. If...
view full answer... - Height Differences Between 2-1/2" Curt and Draw-Tite Hitches for a 2011 Ram 2500While we haven't had the opportunity to install the Curt # C15809, Curt # C15704, and Draw-Tite # DT45509 hitches, from what I could see in the photos customers have sent in it looks like the Draw-Tite will actually sit right up next to the bumper on your 2011 Ram 2500. The C15704 that you referenced has a little bit of a gap, and the C15809 looks to sit a little lower.. I don't have exact measurements on these or the OEM hitch on your Ram 2500 but I'm attaching a few pictures that you...
view full answer...
- Best Trailer Hitch that Will Fit Under Factory Hitch on a 2007 Dodge Ram 3500The issue with the factory hitch on a 2007 Dodge Ram 3500 is that the hitch is actually welded to a sort of u-shaped support piece of steel. So because of this design the factory hitch cannot be removed. You will need a version that fits beneath the factory hitch such as # C15809. I have linked a video to the right showing how this hitch installs. If you plan on doing some towing you might be interested in etrailer ball mount kit # EBMK25318. It comes with a ball mount with 1-1/2 inch...
view full answer... - Trailer Hitch Recommendation for a 2004 Dodge Ram 2500 with Factory Trailer HitchThe factory hitch on the 2004 Dodge Ram is welded to the bumper beam on the truck. The bumper beam is a round, curved piece of steel. In order to remove the factory hitch it would have to be torched off and you would not want to cut off any of the bumper beam. The heat from cutting off the hitch could still affect the bumper beam so it is not advisable to remove the factory hitch. I recommend going with a hitch that is designed to fit beneath the factory hitch, like # 41929 that you have...
view full answer... - Curt Trailer Hitch Fit on 2008 Dodge Ram 3500 With Factory HitchThe Curt Hitch # C15809 that fits on your 2008 Dodge Ram 3500 sits directly below the factory hitch, as you can see in this photo a customer provided of his hitch installed on a 3500. Though we have not test fit this hitch on an '08 Ram 3500, we have fit them on similar model years and found there is - approximately - less than 18 inches from the ground to the bottom of the hitch. I would not be able to confirm that exact distance on your truck but that should give you a general idea...
view full answer...
- Trailer Hitch for 2012 Ram 3500 that Replaces the Factory Installed Trailer HitchFor your 2012 Ram 3500 with factory trailer hitch I recommend the Draw-Tite Class V hitch # DT45509. The factory hitch will need to be removed so this hitch can be installed. Once installed the receiver will be right up under the bumper in the same location as the stock hitch was. All of the other options require mounting a hitch so that the receiver will be below the factory receiver and you will lose the ground clearance. I also recommend etrailer.com Ball Mount Kit for 2-1/2" Hitches...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Test Fit:
Nicholas E
Test Fit:
Shane T
Test Fit:
Jared G
Video by:
Chris R
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Joe O.
8/15/2019
Love it. No problems since I installed it and Im a mad man on the road even with a heavy load. I never feel like the receiver is going to fail me. I havent gotten to use the 2.5 pintle hitch function yet but but I have no doubts it will work as advertised.