Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV- 2"
Our Price: $192.23
Confirmed to Fit
2012 Jeep Grand Cherokee
excluding SRT-8
SRT-8
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meCustomers prefer these similar products
- All Info
- Reviews (127)
- Q & A (0)
- Photos
2012 Jeep Grand Cherokee - Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV- 2"
- 2 Inch Hitch
- Class IV
- 7500
- Visible Cross Tube
- Draw-Tite
- 1125
- 7500 lbs WD GTW
- 1125 lbs WD TW
- Custom Fit Hitch
Fully welded Jeep Grand Cherokee trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
Specs:
- Receiver opening: 2" x 2"
- Rating: Class IV
- Maximum gross trailer weight: 7,500 lbs
- Maximum GTW when used with weight distribution: 7,500 lbs
- Maximum tongue weight: 900 lbs
- Maximum TW when used with weight distribution: 1,125 lbs
- Limited lifetime warranty
- Maximum gross trailer weight: 7,500 lbs
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
76432 Draw-Tite Class 4Trailer Hitch Receiver - Max-Frame
Replaces Draw-Tite 76196
Item # DT38MR
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
7,500 lbs.
Tongue Weight (TW):
1,125 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
7,500 lbs.
Tongue Weight (TW):
900 lbs.
Gross Towing Weight (GTW):
7,500 lbs.
Tongue Weight (TW):
1,125 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
7,500 lbs.
Tongue Weight (TW):
900 lbs.
Tech Tip
This only fits models with removable OEM Fascia Panel. No drilling required for installation , Requires temporary removal of bumper/fascia during installation , Installation requires permanent removal of the impact structure; hitch replaces the impact structure for support and safety , Hitch will fit models with an 18" or smaller spare tire under vehicle; larger spare tires will not be able to be stored under the vehicle
Complete Towing Package for 2012 Jeep Grand Cherokee
Package Price:$305.51
2012 Jeep Grand Cherokee Owners Who Purchased This Trailer Hitch Also Bought...
Replacement Parts Available For This Product
Popular Grand Cherokee Trailer Hitch Accessories
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Too difficult to install
Customer Reviews
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV- 2" - DT38MR
Average Customer Rating: 4.8 out of 5 stars (127 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.by: Sean10/17/2022
Haven’t put it to the test yet with actual towing, but as far as install goes it was super easy. The videos provided by etrailer were thorough and easy to follow along with. The daunting task of pulling off the rear bumper on my new car was less scary after having seen it done. Looks great!
by: Brian06/07/2022
Great hitch receiver at a great price!!
Fast delivery
Installed by my regular mechanic in less than an hour
Video on etrailer website was very helpful
Brian
6/8/2023
A year later and hitch is still working great without any issues. Highly recommended!!
by: Timothy04/06/2024
2014 Dodge Durango
The installation videos on durango (mine 2014) were extremely helpful. Especially how to remove the bumper facia. I found it was unnecessary to drop the exhaust system. The fish wires to pull the carriage bolt and bar were very helpful. on the passenger side, i needed to have the bar and bolt go into the cavity one at a time and had to be careful how the bar landed to allow it to reassemble by pulling on the fish wire.
by: Michael05/31/2024
2017 Dodge Durango
Package was delivered as notified. First impression was the package was damaged,from the inside out. Upon opening I found the contents to be poorly packed. I understand it's a heavy piece. But could have been a little more stuffing to help the contents from shifting inside the box. As for the product small amount of damage to the paint but not significant to the actual use of the product. Thank you for the prompt shipping.
by: Greg08/04/2022
2018 Dodge Durango
I am a first time user of e-trailer. My experience was a good one. The parts that I had ordered arrived very quickly for not having to pay any shipping, good on you e-trailer. I had watched the video on installing my new draw tite receiver. It was a completely custom fit for my 2018 Durango. And the video was spot on. As I saw in other reviews most did not like that they use ty-wraps to hold the bottom part of the fascia, so I went a step farther and drilled and tapped two 1/4x20 holes in the bottom of the reciever and screwed it on to the bottom (see pics) worked great. The only problem I had was the collar on the reciever was not welded on in the right spot, just a bit off. That made it difficult to push a hitch ball in or in my case a bike rack(also purchased for e-trailer, but with a bit of filing all good. Thanks guys for getting everything here quickly.
Greg
8/14/2023
I have not used it a bunch yet, but when I first installed it we went on a trip to Michigan. It was about a 5-6 hour drive. I hauled 4 adult bicycles on the hitch and bike rack purchased from e-trailer. They made the trip flawlessly, both directions. I was and are very satisfied with e-trailer and the equipment purchased from them, would recommend them to anyone. Thanks guys!
by: Roberlan02/16/2024
2019 Dodge Durango
Great fitment. Awesome product easy ins tallation
by: Eric07/31/2022
2019 Dodge Durango
Directions are clear, but the online video is super helpful and clearer.
Eric
7/31/2023
I feel confident of the integrity of the hitch. No issues on my occasional use with my trailer 2-5k and hitch carrier. Id buy again when needed for another vehicle.
by: MP01/09/2023
So happy I purchased this hitch from etrailer. The installation went perfectly.
They though of everything and I loved the fish cables the best.
Very fast shipping..great customer service.. very detailed videos for installs.
It’s not to often companies value good business anymore.
I will definitely buy from etrailer again.
Excellent service. They deserve more then 5 stars.
by: Yonaidy04/29/2024
2021 Dodge Durango
It fit perfectly thank you so much already hang my bike on it
by: Zach08/29/2023
So this hitch is great! It is a decent amount of work to put in by your self so I suggest asking for help. Even with help, be ready to put some work in. In my opinion it is worth it because this recover hides in the bumper so you can put cover on to make your Durango look slick. Now the only reason why I give it 3 stars, is because it’s very difficult to get the chains to snap on to the loops. It’s very inconvenient but this problem could probably be fixed with adding in some quick link hooks. If it wasn’t for that, I’d give it 5 stars!
by: Jarren06/08/2024
Easy to install. Instructional video was easy to follow. Make sure you have a 19mm deep socket available. It’s not listed on the tools needed list. Hitch could have been packaged better on the sharp edges to prevent it from compromising the box
by: Bob 07/28/2023
2017 Dodge Durango
We are using this hitch package on our 2017, Durango GT to tow a new (single) personal watercraft. Delivery communication was delivery only took a few days. We had it professionally installed with no issues. I love that the hitch receiver is mostly hidden within the bumper cover (when in use) and that the removable OEM hitch cover fits perfectly with no interference (when not in use), all while maintaining OEM ground clearance. Very slick and MUCH less $$ than the OEM.
by: David 06/05/2024
Dodge Durango
Excellent quality, quick shipping. Looking forward to the install on my Durango R/T
by: Tim 02/21/2024
Easy and straight forward unnatural process. Works great no problems.
by: Mike11/05/2021
Product came in on time and as described! The associated videos showing install was extremely helpful and they made the install very easy! I had a few different tools so I did not have to drop the exhaust, but I appreciate that they showed how to do it for those that may have to. Results came out awesome and the hardware included the body pins which was helpful. The only thing I would ask for would be the clips for the lower facia to be reinstalled instead of using zip ties.
by: Shaun08/23/2022
Excellent product. Very thorough directions. It made installation very easy.
by: Dan 08/26/2023
2021 Dodge Durango
so easy to install, online video was spot on with the instructions right down to the socket sizes needed.
by: Hugo04/25/2022
Everything fits perfect the only problem is the Botoom part doesn't have the support for bumper where 2 bottom bolts goes.
by: Aaron 02/04/2023
Dodge Durango
I am very pleased how well it fit on my 2022 Dodge Durango SXT. It took my son and I just over an hour to complete installation. We watched the provided installation video and never had to look at the instructions. Side note, we didn’t remove the spare, lower the exhaust, or cut the plastic as shown in the video.
by: Herman04/10/2023
2013 Dodge Durango
Worked out perfect even though my bumper didn't have the cutout for a hitch I made one
by: Sidney12/14/2021
Very happy with the product. Was able to install as shown in the video.
by: Mike01/26/2023
Missing the wiring harness
Brooke M.
1/30/2023
Thank you for letting us know! We will get you that harness. I have already sent your information to our customer service team and they will be getting in touch.
by: Chris09/20/2022
Fast shipping. Awesome instructional videos. Was able to install my hitch with the bumper mod so it was hidden when not in use. definitely reccomend to anyone looking for trailer/cargo accessories. Next purchase, roof racks!
by: Jeff 08/24/2022
I much prefer this hitch rather than the low-mount hitches. Installation was definitely more involved than the non-hidden receivers. My biggest complaint with this receiver is the attachment points for the trailer safety chains. It's impossible to get the safety chain hooks onto the mount rings, which ultimately requires the use of either quick links, or another (adequately rated) attachment technique.
25
127
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Will The Draw-Tite Hitch # 76196 Fit A 2019 Dodge Durango RT With A Spare?Yes, there is plenty of room between the Draw-Tite Hitch # DT38MR and the spare tire on the 2019 Dodge Durango. The stock spare is an 18 inch wheel and you will have no problems. I've included a picture to show you and also included the install video so you can install by yourself!
view full answer...
- Best Hidden Trailer Hitch Recommendation for 2020 Dodge DurangoThe most hidden trailer hitch available for your 2020 Dodge Durango is without a doubt the Draw-Tite Max-Frame Trailer Hitch Receiver # DT38MR. The 2" receiver for this Class III hitch will actually extend out through the bottom of the rear bumper instead of sitting below it like all the other options. This not only provides you with a clean, factory-like appearance but it also really helps with ground clearance. I have attached a couple images below so you can see exactly how it looks...
view full answer...
- Does Rear Bumper Panel of 2018 Dodge Durango Install After Draw Tite Hitch # DT38MR InstallsThe removable panel of your 2018 Dodge Durango that normally covers the # DT38MR trailer hitch will be able to reinstall. I attached a picture from a customer that shows the panel reinstalled after.
view full answer...
- Trailer Hitch for 2020 Dodge Durango that is Totally Hidden Behind Removable Appearance PanelYes the Draw Tite hitch part # DT38MR that you referenced is a hidden hitch for your 2020 Dodge Durango. When not in use you can reinstall the rear fascia cover over the hitch opening and it would be totally concealed. We've had customer come back and tell us how well the hitch fit and that they liked how the rear cover was able to fit back over the hitch once it was installed.
view full answer... - Can 7-Way Trailer Wiring Harness 30955 Fit 2018 Dodge Durango RTYour 2018 Dodge Durango RT most likely has the tow package so to find where the connector is you'd need to look behind the rear bumper most likely on the driver side of the vehicle to find what the # 30955 needs to plug into. The Draw Tite hitch that fits your vehicle # DT38MR does not have a mounting bracket so you'd need to attach the 7-way to the lower edge of the vehicle bumper with the included hardware. Then for a brake controller the Prodigy P2 part # 90885 is a great option that...
view full answer... - How to Balance a Load When Towing With a 2020 Dodge DurangoIf you are referring to rubber spacers/washers that would install between the frame and the Draw-Tite 76196, allowing it to flex and level out when there is more weight on one side, then we do not. We also highly discourage installing the hitch in this manner. These have specific torque ratings for the install to keep everything secure to the vehicle. If these are not followed, there could be a catastrophic failure while towing a trailer or carrying an accessory, which would be very bad....
view full answer... - Trailer Hitch and Wiring for 2019 Dodge Durango with Dual ExhaustWe definitely have a trailer hitch fit for your 2019 Dodge Durango that has a dual exhaust, and I highly recommend the Draw-Tite Trailer Hitch Receiver # DT38MR because it has a concealed crosstube so your Durango maintains its clean look. This is a Class III hitch with a 2" receiver and has a 6,000 lb towing capacity with a whopping 900 lb tongue weight capacity which speaks to its strength and durability, as does its lifetime warranty. For wiring I recommend the T-One Vehicle Wiring...
view full answer...
- Recommended Hitch, Wiring Harness, and Brake Controller for a 2022 Durango w/ the Towing PackageI would be happy to help you set your 2022 Dodge Durango up to tow your cargo trailer. I have linked all necessary parts below along with any pictures and installation videos we have that will help you install them. For a hitch, I recommend the Draw-Tite Max-Frame Trailer Hitch item # DT38MR. This hitch is custom fit and bolts to your Durango with included hardware. I really like this hitch because it mounts behind your rear bumper and is completely concealed behind the cover when you...
view full answer...
- How To Attach Trailer Connector To Draw-Tite Max-Frame Trailer Hitch Receiver On 2021 Dodge DurangoIn order to attach a trailer connector to the Draw-Tite Max-Frame Trailer Hitch Receiver part # DT38MR like the T-One Vehicle Wiring Harness part # 118617 you'll simply need the No-Drill Mount for Electrical Mounting Bracket part # 18140 and Mounting Bracket 4-Pole Flat part # 18144. The no-drill bracket will wrap around the hitch crosstube with the band clamp and then you just attach the four way bracket to this. That said, you can actually just secure the connector to the safety chain...
view full answer... - Recommended Receiver, Wiring, Brake Controller & Hitch For Towing a Travel Trailer With 2020 DurangoYes, the Draw-Tite Max-Frame Trailer Hitch Receiver # DT38MR will give you a receiver that mounts behind the removable tab on your bumper for your 2020 Dodge Durango. Do be sure to check your spare tire size as this receiver will only allow you to keep your spare tire underneath your Durango if it is on a 18" or smaller spare tire. For the wiring you will first need a T-One Vehicle Wiring Harness # 118617 for connecting to your tail lights. This will then connect to the Universal Installation...
view full answer... - Complete Towing Setup for a 2021 Jeep Grand CherokeeI would be happy to help you set up a towing package for your 2021 Jeep Grand Cherokee. You're going to need a hitch, wiring harnesses, brake controller, and ball mount. For your hitch you are going to want the Curt Trailer Hitch Receiver item # C13065. This hitch is custom fit and bolts directly to your Jeep's frame with included hardware. It has more than enough capacity to pull your food trailer. It is also the only hitch for your model year of Grand Cherokee that allows for storage...
view full answer...
- Can Spare Tire Stay on 2022 Dodge Durango Using Draw-Tite Hitch DT38MRHey Roland, good question and the answer is you can leave your 18 inch spare tire on your 2022 Dodge Durango and still install the Draw-Tite Max-Frame Trailer Hitch Receiver # DT38MR.
view full answer... - Trailer Hitch Recommendation For 2020 Dodge Durango That Allows Bumper Cover To ReinstallI recommend the Draw-Tite Max-Frame Trailer Hitch Receiver part # DT38MR for the 2020 Dodge Durango that allows the knock out panel to be replaced when the hitch is not in use. I have attached an installation video on a 2019 Dodge Durango but the installation will be the same for the 2020. If you need wiring, I recommend Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter - 7 Way Trailer Connector part # TK22113 which will give you a fully functional 4-Way and 7-way...
view full answer...
- Which Hitch and 7 Way Wiring Harness for a 2021 Dodge Durango GTI have a solution for you, but there is not a package with all of these parts offered so you'll need to get the individual parts. I'm also skeptical that there is room to fit a 7 way trailer plug in the opening left by removing the knockout panel; the 4 way fits without issue, but you'll likely need to find a mounting location below the bumper for the 7 way connector because of its' size. With that said, you can use the Draw-Tite # DT38MR and it will fit right behind the knockout panel,...
view full answer... - Trailer Wiring for a 2018 Dodge Durango GTI agree the Draw-Tite, part # DT38MR, is the best looking hitch available for your 2018 Dodge Durango. If the trailer you're going to be towing has a 4-way connector then I recommend the Hopkins, part # HM11142214. The converter box mounts with two screws instead of one or just double sided tape like the other options. A lot of the times we see issues with wiring it's because the converter box took a hit from not being mounted well enough and damaged it. The extra screw will help...
view full answer... - Will The Draw-Tite Hitch 76196 Allow 20 Spare Tire to Stow Under Dodge DurangoThe Draw-Tite Class III Max Frame Receiver Hitch part # DT38MR does require the removal of a 20" spare tire. The hitch is designed to fit with a stowed 18" tire but not 20" so it will not be able to remain stowed under the vehicle. There are currently not any options that allow you to stow a 20" tire.
view full answer...
- Can Rear Bumper Cover be Reinstalled With Draw-Tite Trailer Hitch Installed on a 2019 Dodge DurangoYes, you will be able to cover the Draw-Tite Max-Frame Trailer Hitch Receiver # DT38MR once it is installed on your 2019 Dodge Durango. The photo you are referencing is from the linked installation video of this trailer hitch on a 2017 Durango. If you skip to the very end of the video you can see where our install team is able to replace the cover after all is said and done. I have also attached an installation video of this on a 2018 Durango that you can check out. If you let me know...
view full answer...
- Recommended 2016 Dodge Durango RT Trailer Hitch Receiver Behind Bumper CoverThe Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # DT38MR is a confirmed fit for your 2016 Dodge Durango RT. The receiver will fit behind the factory fascia and it will need to be trimmed for access to hitch and wiring. We do not carry the bubble cover you mentioned. For your vehicle wiring, I recommend the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter - 7 Way Trailer Connector # TK22113. This will allow you to simply connect...
view full answer...
- Recommended Parts to Tow a 2015 Jayco Jay Flight 24FBS with a 2021 Jeep Grand CherokeeI'd be more than happy to help you get your 2021 Jeep Grand Cherokee setup for towing and making memories with your family! Since the 2015 Jayco Jay Flight 24FBS you're looking at is a heavier trailer we'll need to get your Jeep outfitted with a trailer hitch, wiring, a brake controller, and a weight distribution system. Here is what I recommend for your setup: Draw-Tite Max-Frame Trailer Hitch Receiver - # DT38MR T-One Wiring Harness - # 118727 Universal Wiring Kit - # ETBC7 Mounting...
view full answer...
- How Does Install Hardware Thread Through Frame for Trailer Hitch for 2017 Dodge DurangoThe method to get the bolt and spacer through the frame of your 2017 Dodge Durango is called "fishwiring" which you can see the entire process outlined in the install video link I attached.
view full answer... - Recommended Hidden Trailer Hitch Receiver For 2021 Dodge Durango With 7000lb Trailer RatingI recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # DT38MRyou were looking at as it is confirmed to fit your 2021 Dodge Durango, and fits behind the rear bumper like you mentioned you were wanting. The # DT38MR has a 1125lb tongue weight rating and 7500lb trailer weight rating, but your Durango may not so you will want to check the owner's manual of your vehicle to confirm its towing capacity and use the lower rating between the hitch and vehicle. To...
view full answer... - Recommended Hitch and Wiring Harness for a 2021 Jeep Grand CherokeeI have a great towing setup for your 2021 Jeep Grand Cherokee. You're going to need a hitch receiver, wiring harness, brake controller, and ball mount. Let's start with the hitch receiver. I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver item # DT38MR. This is a custom fit receiver that mounts to your Jeep with included hardware that requires no welding or drilling into your frame. It has a maximum gross trailer weight of 7,500 lbs and a maximum tongue weight of 900 lbs. This...
view full answer... - Can Hitches for 2020 Dodge Durango Fit With Spare Larger than 18 inch Wheel SizeAll of the hitches we offer for your 2020 Dodge Durango like the Draw Tite part # DT38MR do not fit with spare sizes that are larger than 18 inches. Now if what you have truly is smaller in overall diameter than a standard tire size that fits your vehicle the hitch would fit with it. The 18 inch tire size that fits your vehicle has a diameter of 30.5 inches so you'd want to measure the diameter of your spare and make sure it's less than 30.5 inches.
view full answer... - Hitch Mounting Bracket for 7-Way Wiring Harness on a 2015 Jeep Grand Cherokee LaredoThe Hopkins 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End item # HM40975 will fit your 2015 Jeep Grand Cherokee Laredo if you have the towing package. It will be easy to confirm if you do because there will be an OEM plug directly behind your rear bumper to plug into to. I have linked an installation video. Typically the Draw-Tite hitches like Item # DT38MR have the mounting plate installed to mount the wiring harnesses. There isn't a hitch available for...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Kathleen M
Updated by:
Leah S
Updated by:
Wilson B
Video by:
Dustin K
Video by:
Jonathan Y
Video by:
Thomas T
Video by:
Rick G
Test Fit:
Conner L
Test Fit:
Jacob H
Test Fit:
Ryan G
Test Fit:
Bradley B
Written by:
Mark S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sean
10/17/2023
After a year I still love this hitch. Looks great, tows great, not a single complaint. As a consumer I feel I am often very critical of products and I honestly have nothing I can find wrong with it. If you’re on the fence, get it! You won’t be disappointed.