Hidden Hitch by Draw-Tite Trailer Hitch Receiver - Custom Fit - 2"
(3 reviews)
Price: $417.52
In Stock
Hidden Hitch by Draw-Tite Trailer Hitch Receiver - Custom Fit - 2"
Item # DT72GR
Retail:$779.46
Our Price: $417.52
You Save: $361.94
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (3)
- Q & A (0)
- Photos
Hidden Hitch Trailer Hitch - DT72GR
- Class III
- 2 Inch Hitch
- 3500 lbs GTW
- Completely Hidden
- Hidden Hitch
- 350 lbs TW
- Custom Fit Hitch
This hidden, custom-fit hitch installs behind your vehicle's rear bumper so that the cross tube is always out of sight. Fully welded, corrosion-resistant receiver easily removes when not in use.
Specs:
- Receiver opening: 2" x 2"
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 350 lbs
- Not rated for weight distribution systems
- Ball mount requirements:
- Minimum rise: 3/4"
- Maximum length: 10-1/2"
- Limited lifetime warranty
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Hidden design - hitch is completely out of sight for a clean, from-the-factory look
- Hitch cross tube is concealed behind rear bumper
- Removable receiver unbolts from hitch when not in use
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Durable storage case and anti-theft lock included
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
76919 Hidden Hitch by Draw Tite Hitch Receiver - Custom - 2" Receiver
Installation Details
This Product Fits The Following Vehicles
- 2021 - 2024 Ford Mustang Mach-E
Customer Reviews
Hidden Hitch by Draw-Tite Trailer Hitch Receiver - Custom Fit - 2" - DT72GR
Average Customer Rating: 5.0 out of 5 stars (3 Customer Reviews)
This hidden, custom-fit hitch installs behind your vehicle's rear bumper so that the cross tube is always out of sight. Fully welded, corrosion-resistant receiver easily removes when not in use.by: Edmond 07/31/2022
2021 Ford Mustang Mach-E
Very fast delivery. Some paint loss noticed as received but I will touch up during installation. Good instructions for installation.
by: Frank 08/31/2022
Good products, fast shipping.
by: Francis 12/12/2023
2023 Ford Mustang Mach-E
3
3
See what our Experts say about this Hidden Hitch Trailer Hitch
- Depth of Receiver for the Draw-Tite Hidden Hitch on a 2022 Ford Mustang Mach-EThe 2' x 2" receiver portion of the Hidden Hitch by Draw-Tite item # DT72GR has a 5" depth before you get to the weld. This is from the opening of the receiver to the farthest point on the inside. This hitch is a confirmed fit for the 2022 Ford Mustang Mach-E.
view full answer... - Draw-Tite or Curt Trailer Hitch For 2021 Ford Mustang Mach-EThat's a good question, and there is one option I do like better for your 2021 Ford Mustang Mach-E between the Curt # C77ER and Draw-Tite # DT72GR hitches, and that's the hitch from Curt, which is the following part number: - Curt Trailer Hitch Receiver # C77ER The reason I like the Curt the best is because it has a longer receiver that allows you to easily install an accessory like a bike rack without any bumper interference; the receiver on the Curt extends just past the bumper so it...
view full answer... - Hidden Hitch vs Stealth Hitch for a 2022 Ford Mustang Mach-EI would be happy to compare those two hitches for you but there is little to no technical information available about the Stealthhitch because it does not release until the end of August 2022. Out of the two I would highly recommend the Draw-Tite item # DT72GR for your 2022 Mach-E. It has a comparable installation method so ascetically it is nearly identical. Price wise there is no comparison. The Draw-Tite hitch is significantly less expensive. If you are going to tow with the Stealthhitch...
view full answer... - Tongue Weight of the Hidden Hitch by Draw-Tite for a 2021 Ford Mach-EI would be happy to answer those questions for you. I will start by confirming that the Hidden Hitch by Draw-Tite Trailer Hitch Receiver item # DT72GR is confirmed to fit your 2021 Ford Mustang Mach-E. To verify what your Mach-E's tongue weight capacity is you will need to check your owner's manual or call your local Ford dealership with your VIN. There is conflicting information available online and the safest option is to go directly to the manufacturer's information.
view full answer... - Least Visible Hitch for 2023 Ford Mustang Mach-EThe least visible hitch for your 2023 Ford Mustang Mach-E is the Hidden Hitch by Draw-Tite # DT72GR. This hitch has a removable receiver for a completely hidden design when not in use. It also features a bolt-on installation and a limited lifetime warranty.
view full answer... - Does Hidden Hitch for 2022 Ford Mustang Mach-E Need 4-Way Mounting BracketYes, you would want to use a 4-way mounting bracket like the part # 18144 with the Hidden Hitch part # DT72GR to mount the 4-way of the Tekonsha harness part # TK24vr that is a fit for your 2022 Ford Mustang Mach-E. The hitch comes with a bracket for the mounting bracket to attach to as well.
view full answer... - Draw-Tite Hidden Hitch or Curt Hitch? Which is Better for a 2022 Mustang Mach-E?I would be happy to help you find a hitch for your 2022 Ford Mustang Mach-E. I absolutely recommend the Hidden Hitch by Draw-Tite Trailer Hitch Receiver item # DT72GR over the Curt item # C77ER. It is definitely worth the extra money. The receiver is completely removable. When you are not towing your trailer or hauling an accessory you can take the 2" x 2" off and retain your factory appearance. This hitch also has a higher capacity than the Curt and will allow you to fully use your Mach-E's...
view full answer... - Most Concealed Hitch for a 2022 Ford Mustang Mach-EYes, we have a great hitch for your 2022 Ford Mustang Mach-E that will have your vehicle looking like it did from the factory when you are not towing. It is the Hidden Hitch by Draw-Tite Trailer Hitch Receiver item # DT72GR. This hitch is custom fit and bolts directly to your Mach-E's frame with included hardware. The best thing about this hitch is its completely removable 2" x 2" receiver. When you are not towing you simply unlock the receiver from the main cross tube, store it away in...
view full answer... - Can Hidden Hitch by Draw-Tite Receiver Be Removed With Bike Rack InstalledI can't say for sure since it hasn't been tested and we don't have one around to try it out. It would also depend on the actual bikes and bike rack you have. I imagine that as convenient as it may seem it is probably a horrible pain to detach the # DT72GR receiver with the bike rack on. It might be doable with an extra set of hands but if you tried it yourself it would be awkward and something will probably be hitting the ground. You're welcome to give it a shot but I think it would be...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Dustin K
Updated by:
Wilson B
Updated by:
Carrie F
Video by:
Thomas T
Test Fit:
Bradley B
Written by:
Justice A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.