Depth of Receiver for the Draw-Tite Hidden Hitch on a 2022 Ford Mustang Mach-E

Question

Question:

Hello, what is the usable depth of the 2x2 receiver?

asked by: Brian

1

Helpful Expert Reply:

The 2' x 2" receiver portion of the Hidden Hitch by Draw-Tite item # DT72GR has a 5" depth before you get to the weld. This is from the opening of the receiver to the farthest point on the inside. This hitch is a confirmed fit for the 2022 Ford Mustang Mach-E.

expert reply by: Jerred H

1

Answer 1

I would be happy to answer those questions for you. I will start by confirming that the Hidden Hitch by Draw-Tite Trailer Hitch Receiver item #DT72GR is confirmed to fit your 2021 Ford Mustang Mach-E. To verify what your Mach-E's tongue…

view full answer...

Answer 2

I would be happy to compare those two hitches for you but there is little to no technical information available about the Stealthhitch because it does not release until the end of August 2022. Out of the two I would highly recommend the Draw-Tite…

view full answer...

Answer 3

I would be happy to help you find a hitch for your 2022 Ford Mustang Mach-E. I absolutely recommend the Hidden Hitch by Draw-Tite Trailer Hitch Receiver item #DT72GR over the Curt item #C77ER. It is definitely worth the extra money. The receiver is…

view full answer...

Answer 4

That's a good question, and there is one option I do like better for your 2021 Ford Mustang Mach-E between the Curt #C77ER and Draw-Tite #DT72GR hitches, and that's the hitch from Curt, which is the following part number: - Curt…

view full answer...

Answer 5

Yes, you would want to use a 4-way mounting bracket like the part #18144 with the Hidden Hitch part #DT72GR to mount the 4-way of the Tekonsha harness part #TK24vr that is a fit for your 2022 Ford Mustang Mach-E. The hitch comes with a bracket for…

view full answer...

Answer 6

Yes, we have a great hitch for your 2022 Ford Mustang Mach-E that will have your vehicle looking like it did from the factory when you are not towing. It is the Hidden Hitch by Draw-Tite Trailer Hitch Receiver item #DT72GR. This hitch is custom fit…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...