Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"
Item # C15323
Retail:$540.95
Our Price: $312.81
You Save: $228.14
Confirmed to Fit
2003 GMC Sierra
1500
2500 LD
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (200)
- Q & A (0)
- Photos
2003 GMC Sierra - Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"
- 2 Inch Hitch
- Class V
- 16000
- Visible Cross Tube
- CURT
- 2400
- 17000 lbs WD GTW
- 2400 lbs WD TW
- Custom Fit Hitch
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your GMC Sierra's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class V
- Maximum gross trailer weight: 16,000 lbs
- Maximum GTW when used with weight distribution: 17,000 lbs
- Maximum tongue weight: 2,400 lbs
- Maximum TW when used with weight distribution: 2,400 lbs
- Maximum gross trailer weight: 16,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
15323 CURT Trailer Hitch Receiver - Custom Fit - Class V Xtra Duty- 2"
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
16,000 lbs.
Tongue Weight (TW):
2,400 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
17,000 lbs.
Tongue Weight (TW):
2,400 lbs.
Gross Towing Weight (GTW):
16,000 lbs.
Tongue Weight (TW):
2,400 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
17,000 lbs.
Tongue Weight (TW):
2,400 lbs.
Tech Tip
No drilling required for installation , Spare tire will need to be lowered or removed temporarily for hitch installation , Requires factory bumper for installation
Complete Towing Package for 2003 GMC Sierra
Retail:$703.81
Package Price:$423.45
2003 GMC Sierra Owners Who Purchased This Trailer Hitch Also Bought...
Popular Sierra Trailer Hitch Accessories
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" - C15323
Average Customer Rating: 4.8 out of 5 stars (200 Customer Reviews)
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Alan11/28/2022
2007 Chevrolet Silverado 1500
Hitch is very heavy duty but seemed to have been delivered by Ace Ventura. Was very scratched up. Hitch bolted right up on a 2007 GMC 1500 HD. The height of the hitch exactly matched the original. Spare tire does not need to be removed. Per the instructions, you are supposed to re-use the existing aft most frame bolts. Be aware that if you use those, they only engage the weld nut by 3/16 of an inch. That is short of fully maximizing the weld nut. Ideally, the bolt threads should go all the way thru the weld nut plus about 2 threads. I replaced those aft bolts with longer ones that fully engage the weld nut. Since the new hitch does not attach to the bumper, I fabbed a custom Z bracket, using 2 pieces of angle iron, to help carry the load. The light plug assy needed to also be modified. The factory angle is 90 degrees, but the wire harness would bot engage the plug assy. I modified the plug bracket as can be seen in the photos.
by: Jason 04/13/2024
Chevrolet
I bought this for my 02 Chevy 1500HD. It bolted on perfectly and is ideal for pulling heavier loads. I’ve pulled max payload loads for the truck with this new hitch and it has worked with no trouble. Would suggest to anyone.
by: Jason10/10/2022
Website said it would fit perfectly for my 2004 Chevy 2500HD. It did not. I had no option to return as I needed to tow the following day so had to work into the night to customize it which therefore I wouldn’t be able to return. I had to use a torch to cut a section out of both sides on the hitch to have it fit around the spring shackle and had to use the torch to make a new bolt hole in the frame closest to the front for that bolt hole. Also drops the receiver an inch lower than the factory height. Was not at all happy but was thankful I had the tools to make it work. Worst thing I hate is that it’s dropped lower than the stock receiver height.
Katrina B.
10/18/2022
I am sorry to hear that this hitch did not fit your application. I see that this hitch is not a confirmed fit for any of the Chevy HDs. This is only a confirmed fit for the Chevy 2500LD and 1500.
by: Michael 05/15/2024
always a good experience with etrailer, thats why i come back.
by: Dan 02/03/2024
The trailer hitch is great simple installation but I had to change hooks on my chain from my trailer other than that top notch
by: Tammy 03/06/2024
this is a way better hitch than class 3 hitch I relaced after 23 years.
by: Denise11/29/2023
It's well made and installation was pretty simple. Nice early x-mas present!
by: Seabee John07/01/2023
2011 Chevrolet Silverado
Went on my 2011 Silverado LT without removing spare tire.
by: Sidney 04/17/2024
2011 GMCSierra
Fit perfectly on my 2011 GMC 1500 Sierra SLE Fast shipping great customer service I have never had any problem with any thing I have ordered from ETrailer Great company to do business with Thanks
by: Kim12/14/2023
2014 Chevrolet Silverado 1500
Clear simple instructions, went on quick and easy. Looks good and feels sturdy.
by: Dale T03/17/2024
Very well made and very fast shipping!!! I would definitely recommend also use etrailer again !!!
by: Kurt04/26/2024
Mack Trucks
I brought this to my local garage to install it, and they were amazed at the quality. They wondered if I was going to start to haul Mack trucks around or what? It has had zero defects all the holes lined up perfectly to my truck.
by: Gary K04/14/2020
2012 GMCSierra
Great price, quick shipping even with the pandemic going on. Had a little trouble installing this heavy duty hitch by myself but went on very easy with no issues.
I have not pulled anything yet, but don't expect any issues with this 16k rating on a 1/2 ton truck.
Gary M.
4/15/2021
No issues at all. Great product and company to purchase from.
by: StJulian09/17/2017
2013 Chevrolet Silverado
Shipment was quick.After getting the a socket deep enough to remove the old bolts from the light duty hitch on my 2013 Silverado, The installation was straight forward and simple with the help of my wife and son. Thanks etrailer.
Stjulian
9/18/2018
Awesome. Still hold strong after 1 year. Handles heavy loads without issues. Still please with this purchase and the easy of installation.
by: Scott 05/25/2024
Great however had to sell truck as frame gave out
by: Glen12/01/2018
2005 GMCSierra
This is a heavy duty 2" receiver trailer hitch (C1523). The 3/8" steel it is made of is the way to go. Aside from the capacity of the hitch one really great features is that the safety chain hook holes are large enough for 3/8" clevis slip hooks. Most hitches don't seem to have holes that are too small.
by: Eric04/24/2020
2011 GMCSierra
This is an excellent upgrade to the OEM hitch. Installation was easy and the spare tire can remain in it's original location.
Eric
4/25/2021
The hitch is solid. Tow my 18 deck trailer and 16 dump trailer with no worries. Very nice product.
by: Brent12/05/2017
Ford
I had purchased a 2006 gmc savanna Thomas short bus and needed a hitch for it. The frame was not a normal savanna width. Searching the etrailer site I found drawings of a hitch I believed would work. I needed to enlarge 2 holes to 5/8inch, clean up 2 1/2 inch holes, and drill 2. 1/2 inch holes. In the end I spent more time running to store to get a needed drill bit. The hitch was installed in less then an hour. This was my 2nd hitch from etrailer the last one went on a Ford e350. Had it on in 20 minutes with my sons help. Both hitches purchased were over kill but the xtra capacity is nothing but piece of mind.
by: 02/01/2024
Only problem with this kit is the attaching screws. They were usless. I ended up thru bolting with bolts and nuts.
by: Stephen05/26/2022
Does the job. Pretty easy to install, other than somewhat heavy (needed a spare set of hands). Had to drop down spare tire to get the hitch up. Even then, spare tire is still touching hitch (tight fit).
by: Scot01/14/2021
2007 Chevrolet Silverado New Body
Bought this hitch receiver to replace the old rusted out factory hitch receiver. Bolted right up with no need to drop the spare tire. The differences between this hitch receiver and the factory one are night and day. This thing is solid. My truck will pull apart before this receiver hitch fails. Way overkill for my needs, but I will never worry about a receiver hitch failure!
by: Stephen 03/22/2024
Fast delivery on a great hitch
by: Kerwin 05/23/2024
Very fast delivery.
by: Colin07/31/2020
2010 Chevrolet Silverado
Very happy with this. Truly bolt on installation without having to modify anything. Definitely seems much stronger than the factory hitch. Its pretty heavy and awkward to do by yourself but its manageable. It took me roughly 20 minutes from start to finish. I no longer have to worry about my hitch while towing.
by: Tyler05/25/2023
Bolted right up to my 09 Chevy Silverado 1500 LTZ. Thank you
25
200
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- High Capacity Trailer Hitch Recommendation for a 2006 Chevy Silverado 1500The highest capacity 2 inch hitch we offer for your 2006 Chevy Silverado is the Curt Hitch part # C15323 which has a 2,400 lb tongue weight capacity and 17,000 lb total trailer weight capacity. I attached an install video for this hitch for you to check out as well. Your stock trailer wiring setup connects to a harness behind the rear bumper and would not be affected by the hitch. It installs by twisting into the socket.
view full answer...
- Trailer Hitch that Fits Right Under the Bumper on a 2009 GMC Sierra 1500Yes. The "C" in front of the part number, # C15323, is just how we designate it as a Curt part. The Class IV and V trailer hitches available for your 2009 GMC Sierra 1500 all set at approximately the same location. That is to say with a minimal, if any, gap between the receiver and the bumper. The Class III hitch # 13322 sits up tighter against the bumper, see the linked video, but as a Class III it isn't rated as high as a IV or V. The higher Class hitches are beefier so they may need...
view full answer... - Curt Hitch Recommendation for a 2002 GMC SierraYes, the Curt Hitch part # C15323 that you referenced is confirmed to fit your 2002 GMC 1500HD. To complete your towing setup you may also be interested in the following products: etrailer.com Ball Mount Kit part # EBMK2416. This provides you with a ball mount and two different hitch ball sizes plus a pin and clip.
view full answer... - High Capacity Trailer Hitch for a 2013 Chevy Silverado 1500 that Sits Tight to Rear BumperThe hitch opening of both Curt hitches you mentioned are going to sit right under the bumper of your 2013 Chevy Silverado. Check out the picture I attached that shows the # C15323 installed on a truck like yours. I attached an install video for you to check out as well. Be sure you don't exceed the towing capacity of your truck that is stated in the owners manual as well.
view full answer...
- Class V Trailer Hitch for a 2007 Chevrolet Silverado Classic 1500If your Silverado has a factory bumper, then yes, the Curt Trailer Hitch, part # C15323, is the hitch that you will want to install on your 2007 Chevy Silverado Classic 1500. This hitch has a max Gross Trailer Weight (GTW) of 16,000 lbs, 17,000 lbs when used with a Weight Distribution (WD) system, and a max Tongue Weight (TW) of 2,400 lbs which doesn't change when using a WD system. Please note that this hitch will not fit SS models. If your Silverado has a deep drop bumper, then you will...
view full answer... - Recommended Ladder Rack, Trailer Hitch Receiver, And Truck Bed Extender For 2013 Chevrolet SilveradoFor your 2013 Chevrolet Silverado, the Truck Bed Extender # BX4004-02 , is a confirmed fit. It will allow you to store this extender allowing you full bed access and will give you the extra 28 inches of space. For a trailer hitch, I recommend the Curt Trailer Hitch Receiver Class V XD - 2", # C15323. This is a custom fit for your vehicle and is made in the USA. There is no drilling required for installation, but the spare tire will need to be lowered or removed temporarily for installation....
view full answer... - Hitch Receiver for 2001 Chevy Silverado with Roll Pan Bumper That Does Not Use License Plate HoleYou are correct. For the 2001 Chevy Silverado 1500, the Curt # 13932 is the only available hitch that can be used with the roll pan bumper. If you wanted to use one of the hitches designed to circumvent the deep drop bumpers that were often found on this model you could use the Curt # 13339. However, this is still a Class III hitch receiver, so it would not increase your towing capacity and there is not anything for use with an aftermarket roll pan bumper that is higher rated than that....
view full answer...
- Recommended Class V Hitch for 2006 GMC Sierra for Towing 10,800 lb BoatI'd recommend upgrading that hitch, ASAP. If the hitch fails while you're towing, causing an accident, your insurance company would be well within their rights to deny you coverage which would leave you wide open to all kinds of legal liability. Not a pretty situation. Usually, Class V hitches do indeed have a 2-1/2 inch receiver tube. However, companies like Curt Manufacturing, Draw-Tite and B&W have developed Class V hitches with a 2 inch receiver tube that are strong enough to be classified...
view full answer... - How Far Down Does Curt Trailer Hitch C15323 Hang from Frame on a 2002 GMC Sierra 2500First I should mention that Curt trailer hitch # C15323 will only fit your 2002 GMC Sierra 2500 if it is an LD (light duty) model. It will not fit a 2500HD (heavy duty) model. But on the hitch it measures approximately 6-1/2 inches from the rear most attachment point (on the vehicle) to the top of the cross tube and 9 inches to the bottom (the cross tube is approximately 2-1/2 inches square). Take a look at the picture I added with these measurements.
view full answer...
- Does Curt Class V Trailer Hitch C15323 Fit 2005 Chevy Silverado 1500You are correct the Curt hitch part # C15323 is a confirmed fit for your 2005 Chevy Silverado 1500HD and is a Class V. We do not have any replacement step side bumpers that fit your truck as we only have standard bumpers.
view full answer... - Curt Class V Hitch Recommendation for a 2012 Chevy Silverado 1500 4x4The Curt Class V Hitch part # C15323 that you referenced has been confirmed by Curt to fit your 2012 Chevy Silverado 1500 4x4, crew cab, short bed truck. This hitch should work well for you. I attached installation instructions for you to check out. Most likely you have trailer wiring, but if yours is damaged you would want the Pollak 7-Way part # PK11916. I attached an install video for this product. For a ball mount, hitch ball, and pin and clip, I would recommend the etrailer Ball...
view full answer... - Replacement Trailer Hitch Receiver For a 2003 Chevrolet Silverado 1500HD Capable of Towing 12,000LBSThe Draw-Tite Trailer Hitch Receiver # 41932 checks all the boxes for you on your 2003 Chevrolet Silverado 1500HD. It is a bolt on installation with no drilling required, and has a weight distribution rating of 14,000lbs. The 7-Way # PK11893 can be secured using a Mounting Bracket # 18138. If you prefer to have the strongest receiver available the Curt Trailer Hitch Receiver # C15323 has the highest capacity available. It is rated for up to 2,400lbs of tongue weight and a trailer weight...
view full answer... - Class V Trailer Hitch That Fits 2015 GMC Sierra 1500There is a Class V trailer hitch that will fit a 2015 GMC Sierra 1500, but hitches are designed as a specific fit for years, makes and models of truck so the Curt Trailer Hitch # C15323 you referenced will not work; it does not have the correct dimensions to correctly install on this this truck. Instead, so long as your '15 Sierra 1500 has a standard factory bumper you can use the B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V # BWHDRH25217. This beast of a trailer hitch...
view full answer... - Where To Find Torque Specs for Curt Class V Trailer Hitch # C15323 for 2007 GMC Sierra New Body The current torque specs are located in the instructions, in step 6. You can see the instructions by clicking the provided link. We don't publish the torque specs on the website because the hitch manufacturer can change them If you click the provided link, you can see the hitch being installed on a 2007 GMC Sierra New Body.
view full answer...
- Does Installation Hardware for CURT Trailer Hitch # C15323 Have Same Weight Capacity as the HitchThe CURT Trailer Hitch, # C15323, is rated for 17,000 pounds gross trailer weight when used with weight distribution. The bolts will be rated the same. You will want to check the vehicle owners manual to determine its specific tow capacities. Whichever is lower, the vehicle or the hitch, is the weight capacity you will need to go by. I have included a link to the installation details for you to view.
view full answer... - Trailer Hitch that Fits Tight Against Bumper on a 2011 Chevy Silverado 1500The B&W hitch # BWHDRH25217 receiver would sit a few inches below the bumper on your 2011 Chevy Silverado. The Class V hitches for the 2011 Silverado 1500 are like that with the other option being Curt hitch # C15323, see video. Curt has a Class III hitch, # 13322, that fits up tight against the bumper. I have linked a video showing installation for you. Draw-Tite also has an option, # 75521, and I have linked a video for this hitch as well.
view full answer... - Class V Trailer Hitch Receiver for 2004 GMC Sierra 2500 LDThere are heavy-duty Class V trailer hitch receivers that fit your 2004 GMC Sierra 2500 LD, though the hitch you mentioned is only a fit for the 2500HD model. You need to have the standard factory bumper on your truck, and if you do, then there are two Class V hitches that fit: - B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V - 2" # BWHDRH25217 - Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" # C15323 I've added links to the instructions and install videos for...
view full answer... - Does C15323 Fit Both the 2003 GMC Sierra 1500 And The 2007 GMC Sierra 1500 ClassicFrom your photos it looks like you have the Class V Curt Hitch part # C15323 for the 2003 Sierra 1500. The Curt Trailer hitch part # C15323 fits both the 2003 GMC Sierra 1500 and the 2007 GMC Sierra 1500 Classic so you can use this hitch on your newer Sierra. However, I highly recommend to change the hardware with part # RHK. Go to the product page and put in hitch number C15323 to order new hardware because the bolts are one time use.
view full answer... - Dimensions of Curt Hitches C14006 and this C15323 for a 2015 Chevy Silverado 1500I went and grabbed both hitches that you referenced to get the dimensions you asked about. If you check out all the attached pictures you will see the dimensions you are looking for the Curt # C14006 and # C15323.
view full answer...
- Curt Hitch # C15323 Compatibility with 2009 GMC Denali AWD with Towing Package The Class V Curt Trailer Hitch Receiver # C15323 is confirmed to fit the 2009 GMC Sierra Denali. This Class V hitch has a maximum gross trailer weight capacity of 16,000 lbs. Keep in mind, however, that your towing capacity will be limited by the capacity of your vehicle, which you can confirm in your owner's manual. Always abide by the lowest rated component of your towing setup. Also note that the ball mount, pin, and clip for this hitch are sold separately. For your convenience, I've...
view full answer... - Recommended Trailer Hitch For 1990 Chevrolet Silverado 4WD Short BedI have another option for you, but the Curt C15322 (now # C15323) is only confirmed to fit select 1999-2014 Chevrolet Silverado's and GMC Sierra's and will not fit your 1990 Chevrolet Silverado 4WD Short Bed. Instead I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" # C15325 which is confirmed to fit your truck as long as it is has the standard or step bumper and is not a crew cab. If your truck is a crew cab then you will need the # C14082 instead. I included...
view full answer... - Trailer Hitch for a 2014 Chevy Silverado 1500Trailer hitch installation between a 2013 and 2014 Chevy Silverado is going to be basically identical. We have a video showing installation of Curt trailer hitch # C15323 on a 2014 Silverado which I have linked for you. We do not have a video on hitch # C14006. If you go with Curt hitch C15323 I recommend etrailer ball mount kit # EBMK2416. It comes with a ball mount with a 3 inch rise or 4 inch drop, 2 hitch balls, hitch pin with clip, and a storage bag. If you go with Draw-Tite hitch...
view full answer... - Trailer Hitch Fits for 2006 Chevrolet Silverado Classic Z71The 2006 model year Chevy trucks were a split model year (C/K Series and Silverado). To select the correct Curt Class IV hitch for your truck you can use the linked page to choose your Vehicle Style. Use the drop-down menu tool to choose your specific configuration. For the standard 1500 use Curt # C14332. For the 1500 with 10-inch deep-drop bumper use Curt # 13339 (Class III). If the 1500 has an aftermarket Roll Pan Bumper use # 13932 (also Class III). If you have a different version...
view full answer... - Class V Trailer Hitch Receiver Fit For 2002 Chevy Silverado 1500 HDThere is a Class V hitch that fits your 2002 Chevy Silverado 1500 HD, though I checked with B&W, and the B&W hitch is not a fit for your truck. Instead, the Class V hitch that does fit is from Curt: - Curt Trailer Hitch Receiver # C15323 I verified with Curt that the # C15323 is a fit for your '02 Silverado 1500 HD, and is a Class V hitch with a 2,400 lbs tongue weight and 16,000 lbs towing weight capacity.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Andrew S
Test Fit:
Shane H
Test Fit:
Robert C
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Video Edited:
Zack K
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Chris R
Video by:
Andrew K
Video by:
Joshua S
Video by:
Alan C
Video by:
Zach D
Written by:
Adele M
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Alan
11/29/2023
Product is alright. As stated in other reviews, the cut outs for the safety chain hooks are poorly designed.