Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"
Item # C15410
Retail:$540.95
Our Price: $311.94
You Save: $229.01
Confirmed to Fit
2011 Ford F-350 Super Duty
Pickup
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (189)
- Q & A (0)
- Photos
2011 Ford F-350 Super Duty - Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"
- 2 Inch Hitch
- Class V
- 17000
- Visible Cross Tube
- CURT
- 2550
- 17000 lbs WD GTW
- 2550 lbs WD TW
- Custom Fit Hitch
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your Ford F-350 Super Duty's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class V
- Maximum gross trailer weight: 17,000 lbs
- Maximum GTW when used with weight distribution: 17,000 lbs
- Maximum tongue weight: 2,550 lbs
- Maximum TW when used with weight distribution: 2,550 lbs
- Maximum gross trailer weight: 17,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
15410 CURT Trailer Hitch Receiver - Custom Fit - Class V Xtra Duty - 2"
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
17,000 lbs.
Tongue Weight (TW):
2,550 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
17,000 lbs.
Tongue Weight (TW):
2,550 lbs.
Gross Towing Weight (GTW):
17,000 lbs.
Tongue Weight (TW):
2,550 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
17,000 lbs.
Tongue Weight (TW):
2,550 lbs.
Tech Tip
Hitch will fit on vehicles with a 20 inch or smaller spare tire. No drilling required for installation
Complete Towing Package for 2011 Ford F-350 Super Duty
Retail:$643.90
Package Price:$414.03
2011 Ford F-350 Super Duty Owners Who Purchased This Trailer Hitch Also Bought...
Popular F-350 Super Duty Trailer Hitch Accessories
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- etrailer mistake
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" - C15410
Average Customer Rating: 4.8 out of 5 stars (189 Customer Reviews)
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Elliott05/23/2024
I didn't find any information on this site regarding if this would fit under a ranch hand bumper replacement. But luckily it did. It mounted right up as stated. I believe my spare tire is stock, and that also fit right back into place. The hitch has much more beef to it than stock. I haul a lot of different heavy trailers, both bumper pulls and goosenecks, can't wait to see how this unit works out.
by: E05/25/2024
Ford Transit Connect
Hitch is fine. The box/shipping materials however were DEE-STROYED in transit. Never seen anything like it before. I know it's a large, heavy piece but it could do with a little better packaging
by: David06/15/2023
2007 Ford F-250 Super Duty
It was an exact fit. I'm 60 and with a couple of jack stands I had it in stalled in less than an hour. Instructions didn't mention it but I also used blue loctite on the bolts and the 7 pin/4 pin connector did not have any holes to connect it so I drilled 2 holes 1/4" into the hitch used original bolts and a nut driver to get them in place. Most people would not have that mechanical knowledge so in future there should be pre drilled holes for that. Overall good experience.
by: Edward05/25/2024
2016 FordF-350 Super Duty
The hitch receiver looks good. I used it to replace my factor Ford F350 hitch receiver for higher tongue weight ratings. Note that this hitch does not come with mounting holes for the factory wiring bundles that the factory hitch receiver had for wire attachment devices. I had to drill my own.
Also note that the etrailer shipping box was not well prepared. My hitch box came with holes and parts of the hitch sticking out. Luckily everything was there and no significant damages or scratches. etrailer really needs to improve their shipping process. No padding or wrapping inside the box to prevent this shipping damage was inside.
by: Craig 04/19/2024
Instal took 5 minutes with help from a friend.The hitch fit perfectly and I would assume this one will last as long as my first one- 20 years. Customer service was outstanding, they had a computer glitch the day I tried to order so called in. Martha took care of the entire order, she did a great job! Great company to work with and will do so again.
by: John05/15/2024
2000 Ford F-250 Super Duty
Very pleased with the hitch and fast shipping. I installed by myself in less than an hour. My pics show how to use 3 pieces of rope to lift and hold without hardly any physical lifting on my part. One rope at the rear up to the bumper a one on each front bolt hole to the front bolt hole in the truck frame. Just keep shortening the ropes until it’s tight to the frame and install bolts. Very easy. Factory spare tire still fits.
by: Ronnie 03/14/2024
2005 FordF-350 Super Duty
I replaced my 05 F350 hitch that had rusted out on the back side, the hitch arrived on time and to my surprise was even better than the one that came with the truck. Great hitch, Great price, Great service. Thanks etrailer
by: Brian01/12/2024
Nothing wrong with the hitch but packaging was very poor from etrailer, most of the hardware was missing out of the box
by: Tyler12/13/2018
2006 FordF-350 Super Duty
Price is perfect, shipping was fast! As others have noted, the box arrived a little beat up. But that is to be expected with a heavy chunk of steel inside a cardboard box. Contents were packaged so there is no chance of missing parts.
Installation wasn’t bad. Use a large breaker bar or a heavy duty impact wrench to remove factory bolts. 350,000+ mile F350 from the rust belt came off with some muscle. This hitch lines up perfectly utilizing the Ford factory centering nubs.
One thing to note is that this hitch will require lowering your spare tire as it has a straight square tube instead of Ford’s factory bent tube that wraps around the spare tire. See pictures.
Installation for me took a little over 1 hour due to a lost security key for the spare tire winch. Ended up deciding to cut the winch cable and replace the winch. With a heavy duty impact wrench and the ability to lower your spare tire, complete installation should take no more that a half hour.
Tyler
12/14/2019
Fantastic!
by: Vincent11/13/2023
2006 FordF-350 Super Duty
MOST OF THE TIME WAS REMOVING THE OLD HITCH, THE BLUE LOCKTITE FORD USED IN 2006 WORKS REALLY WELL. I WAS WORRIED THAT THE 20 INCH SPARE WOULD NOT FIT WITH THE MASSIVE SIZE OF THE NEW HITCH, BUT IT CRANKED RIGHT BACK IN PLACE. INSTALLED IN 30 MINUTES AFTER AND HOUR GETTING OFF THE OLD HITCH.
VERY PLEASED.
by: Fred 02/01/2024
Fit excellent under the stock bumper. The dually has towed 10K with no problems and no sway control.
by: Kenneth10/08/2022
Excellent hitch, looks good.Allows me to tow my 10K dump trailer.Super easy 2 person swap with a floor jack. Wife drove the floor jack.
by: Chris 10/05/2022
1999 FordF-350 Super Duty
Bolted up perfect.. 10 min total job.. regularly tow 14k+ . feel much more comfortable towing now. Ordering for my other trucks soon.
Chris
10/10/2023
Very happy with the hitch. Super easy install. So much better than stock. 2003 f350 Crew Cab Dually v10
by: Joe C08/10/2022
Box was severely damaged in transit, but the hardware kit was securely taped to the hitch itself, which is good. Not surprising for an 80 lb steel piece wrapped in cardboard. Four stars because, despite being a 'direct fit' for my truck, the hitch interfered with an existing mounting screw on the frame rails that could not be relocated, so I had to grind some clearance in the mounting flange of the hitch. While it was a relatively minor inconvenience for me, it could be a show-stopper for someone without the proper tools to make the modification. Also, this hitch does not come drilled for the OEM receptacle bracket. etrailer recommended a strap-on option in one of the question responses that allowed me to bolt my existing bracket to it, but the band clamp that came with it was not large enough to go around the massive tube on this hitch. I was able to use a stainless steel 6" diameter hose clamp from the local big box store to clamp it on... Just barely.
Half the price of the local shops, super fast shipping, and in the end, it works great!
by: Kenneth 02/25/2024
NOT packaged well, but the product itself is excellent! Installation went as expected.
by: Larry11/04/2021
I couldn't be happier with the hitch and etrailer. I was a bit worried about putting a class V hitch on myself. I thought with the weight I sometimes tow, I really wanted it done right. Every truck I've bought before already had the hitch on it. I watched a video etrailer had that actually was on a 2006 F350 Super Duty and with that being the truck I have I was really lucky to see how easy they made it look. I was a bit concerned about the weight over my head, and thought I'd check the cost of having a shop nearby put it on, before ordering it, and they told me I couldn't even get a hitch since my truck was built as an incomplete truck to be finished with utility boxes by Monroe truck. He was also concerned about the Tommy Liftgate that was added after Monroe truck finished building it. He just didn't measure correctly, assuming my frame was wider than standard.
Anna, at etrailer assured me the one I wanted would fit, helped me with the order and got it to me in 3 days. She was right, it fits great and it was a breeze to install. I used a motorcycle jack, with a bungee cord attached to the jack, holding a ball receiver I put in, to keep it more or less straight as I lifted it into place. I think the actual time it took me, installing it by myself, was just about an hour. I highly recommend etrailer for their service from before ordering, with their informative videos, the willingness to answer all your questions, getting the item to you quickly, keeping you informed about the order's status, and then being pro-active in volunteering to help
by: Jim M07/20/2017
2006 Ford F-250 and F-350 Super Duty
Installed very easy. Very stout. Poor box it was shipped in was beat up. Could have expanding foam to keep the hitch from moving and beating up box. As stated in some reviews, the stock location for the electrical connection for the trailer could not be used. I just drilled a hole in the bumper above stock location to mount the trailer plug. This will keep the plug out of the way. See picture.
by: Andrew09/26/2021
2000 Ford F-250 Super Duty
This hitch receiver was a direct fit for my 2000 F250. It took about 40 minutes to complete the whole job, and I definitely recommend having a helper. Other wise the job would have taken much longer.
I was amazed at how much bigger the curt receiver hitch is compared to the factory hitch. Definitely worth the purchase.
by: James 01/26/2024
2012 FordF-350 Super Duty
Quality heavy duty hitch that fit perfe ctly!
by: Jim01/31/2022
Very heavy hitch. Original shipment was missing some hardware, missing hardware was shipped immediately. New hitch did not have a means for mounting the trailer connection plugs. Drilled and tapped holes to mount original bracket.
Great customer service.
Jim
2/1/2023
Hitch has been great, however the typical safety chain hooks will not work on the hitch safety loops. Larger hooks are required.
by: Craig 02/26/2024
One bolt that came with it was cross-threaded and I could not get it on.
by: Brigett11/09/2022
Excellent product & customer service
Brigett
11/10/2023
Customer Service is amazing! We have been using our hitch over a year now and they still reach out. It is great to see the attention to detail that they put into their product and customer service.
Mike L.
11/16/2023
@Brigett Thanks for the kind words, we really appreciate it!
by: BRIAN H.01/24/2013
2008 Ford F-250 and F-350 Super Duty
This hitch improved my trucks towing capacity by almost double. I also feel a lot safer towing down the highway in my rig.
by: Andy08/05/2016
2008 Ford F-250 and F-350 Super Duty
Easy to find product, quick delivery time. Bought a class 5 hitch, Got it in 3 days. Definitely buy from etrailer.com again!
by: Josh 07/06/2023
Quick shipping and installed quickly with 1 person. I'm very happy with the communication from ordering, shipping, to follow up. I'll definitely be buying from etrailer again!
25
189
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Recommended Hitch and Hitch Extension Compatible with 2011 Ford F-350 and 7K TrailerIf you have a 2-1/2 inch opening in your factory hitch receiver on your 2011 Ford F-350, then you can use the Reese Hitch Box Extension and Reducer for Titan 2-1/2" Trailer Hitches # RP45292 along with a weight distribution system for your 8,000 lb capacity. If you have a 2 inch factory trailer hitch receiver opening, then there is another option. If you are right at the 7,000 lb trailer weight or under it, you can use the Brophy Hitch Extender with Step - 2" Hitches - 18" Long - 6-1/2"...
view full answer... - Class V Trailer Hitch Receiver To Replace Curt Class III Receiver on a 1999 Ford F-250/F-350The 2" Curt Trailer Hitch Receiver # C15410 or 2-1/2" Curt Trailer Hitch Receiver # C15810 will be the closest to the same dimensions as your Curt Trailer Hitch Receiver # C13014 on your 1999 Ford F-250/F-350 Super Duty. These Class V receivers are going to use thicker steel and a larger cross tube to accommodate for the heavier weight ratings, but feature a nearly identical design. The 2" Curt Trailer Hitch Receiver # C15410 has a capacity of 2,550lbs tongue weight and 17,000lbs trailer...
view full answer... - Mounting Flange to Top of Crossbar Dimensions for Curt 15410 Class V Trailer Hitch Your Curt # C15316 is for the deep drop bumper and has a measurement of just over 9 inches according to my contact at Curt. He said the # C15410 is 5.32 inches from the frame to the top of the crosstube and they don't have anything in between those two to meet your 8 inches. Due to your aftermarket bumper on your 2000 Ford F-250, you have the best option as the other will not fit. I also reached out to B&W and their 2 inch Class V that is similar will also not fit the dimensions you...
view full answer...
- Trailer Hitch Recommendation for a 2016 Ford F-250The Curt Hitch part # C15410 that you referenced has been confirmed as a fit for your 2016 Ford F-250 so it would work well for you. For a ball mount you would want the part # C45341.
view full answer... - Maximum Towing Capacity of the Curt Class V Trailer Hitch With or Without Weight Distribution SystemI have confirmed with my contacts at Curt Manufacturing, and indeed the towing capacity of the Class V trailer hitch # C15410, is 17,000 pounds with or without using a weight distribution system. Therefore, the maximum towing weight of this trailer hitch is 17,000 pounds. Please check the towing capacity of your 2014 Ford F-250 or F-350, and make sure that it is rated appropriately for towing this capacity. Also please keep in mind that it is not recommended to exceed the lowest rated...
view full answer... - Spare Tire Fitment with Class V Hitch on 2000 Ford F-350 The Curt Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" # C15810 is a fit for the standard or step bumper of your truck. With this hitch, spare tires 20" and larger will not be able to be stored in the original location underneath the vehicle. If you instead go with the Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" # C15410 then your spare tire will fit if you have a 20 inch spare or smaller. If you use the Draw-Tite Trailer Hitch Receiver - Custom Fit - Class V...
view full answer... - Hitch, Weight Distribution And Towing Accessories to Tow 12,000 lb Boat with 2000 Ford F350Unless you're planning on carrying a truck bed camper again, the Torklift # TLF1002-30 Hitch you referenced would be overkill for you. A Class V hitch like the Curt # C15410 would be a less expensive option. For a ball mount, use the Draw-Tite # 40331 with the # 19286 2-5/16 inch trailer ball. Anytime the weight of what you're towing exceeds half the weight of the tow vehicle, weight distribution is recommended. To choose a weight distribution system, you'll need to first determine the...
view full answer... - High Capacity Trailer Hitch Recommendation for a 2005 Ford ExcursionI have a very high capacity hitch I can recommend for your 2005 Ford Excursion, but the Curt part # C15410 is not it. Instead you would want the Torklift part # TLF1006 which is a confirmed fit and has a 1,700 lb tongue weight capacity and a 17,000 lb total trailer weight capacity.
view full answer... - Recommended Hitch Extension for 2004 Ford F-350 with Camper Towing 7100 lbs Travel TrailerIf you need 14 inches to clear your camper, you might be interested in the Curt # C45795. This hitch extender will give you 14 inches of clearance from your current pin hole location. Please note that using a hitch extender will decrease the weight capacity of your trailer hitch by 50 percent. It sounds like your vehicle has a weight capacity of 15000 lbs, and a tongue weight of 1500 which would be well within your weight limit even with the reduced capacity using the hitch extender....
view full answer... - Ball Mount for 2000 Ford F-350 with Camper In Bed to Tow 2007 Hyundai Elantra on Tow DollyThe first thing you are going to want to do is check the owners manual for the 2007 Hyundai Elantra to determine if it can be towed on a tow dolly. If the camper in the truck bed sit on or overhangs the tailgate you will want to get a longer ball mount. The longest ball mounts we carry measure 16 inches from the center of the hitch pin hole to the center of the ball hole. Ball mount # BH20 has a 3/4 inch rise or 2 inch drop and is rated for 10,000 pounds. If your 2000 Ford F-350 does...
view full answer... - Can Ram Long Horn 1500 Pull RV with 2100 Lb Tongue WeightThe tongue weight of a trailer is usually about 10 to 15 percent of its total weight. Given that, RV you describe likely weighs between 21,000 and 25,000 lbs. If you're speaking of a bumper pull trailer, it's likely that the weight of the trailer would exceed the towing capacity of the truck. You don't mention the model year of your Ram, but there probably isn't a bumper pull type hitch available for your truck that would have the necessary capacity. If you were speaking of a fifth wheel...
view full answer... - How Can I Attach My OE Electrical Bracket to the New # C15410 Trailer HitchTo relocate the 7-Way electrical connection on your 2006 Ford F-350 you can use the Mounting Bracket for Pollak 7-Pole, RV-Style Trailer Connector - Vehicle End, item # PK12711U, and a no drill bracket, item # 18136, as long as the 7-Way is similar to the Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket, item # PK11893. We have a video (see link) of a hitch install on a 2006 Ford F-250 that shows, at the end of the video, the relocation of the 7-Way connector. If you have another...
view full answer... - Why is there a Hole on the Side of Curt Trailer Hitch 15410 for a 2001 Ford F-250I spoke with my contact at Curt about trailer hitch # C15410. The holes, one on each side near the bottoms of the brackets, are drain holes. The hitch is not painted or powder-coated. It goes through a dip process and the holes let the excess coating drain out. So the hitch actually looks the same on the inside as it does on the outside. My contact also wanted me to know that the hitch is made in Wisconsin so they build the hitches with the tough winters in mind. To complete your towing...
view full answer... - Is Weight Distribution Recommended when Towing a 14,000 lb TrailerRegardless of the capacity difference between using a WD system and not you would see a benefit to using a WD system for towing a trailer as heavy as yours. The lack of a capacity difference for the WD application does not indicate that you wouldn't benefit from the use of one. Any time the trailer weighs more than 50 percent of the tow vehicle a WD system is recommended. You would be within the capacity of your hitch to tow the trailer without a WD system, but you will have better handling...
view full answer... - Trailer Hitch for a 2000 Ford F-250 that Allows the Spare Tire to Stay in PlaceCurt hitch # C15810 is a great Class V option for your 2000 Ford F-250. It will fit without having to relocate the spare as long as the spare tire is on a smaller than 20 inch wheel. This hitch has a 2-1/2 inch receiver. If you would rather have a 2 inch receiver use # C15410. Draw-Tite hitch # DT45508 is another option you could use (2-1/2 inch receiver). I have linked videos showing example installations of the Curt hitches for you.
view full answer... - Can Full-Size Spare be Reinstalled on 1999 Ford F-250 Fitted with Curt Hitch C15410Curt hitch # C15410 allows reinstallation of a spare tire that is on a wheel/rim up to 20-inches in diameter. I confirmed this with my technical contact at Curt. Do please note that this 20-inch dimension refers to the wheel/rim size, not the larger overall diameter of the tire. Some of the other hitches made for your truck, such as the 2-1/2-inch Class V Curt # C15810, do not allow a 20-inch spare to be reinstalled.
view full answer... - Does Curt 2-inch Class V Hitch C15410 Include Trailer Wiring Mounting BracketCurt 2-inch Class V hitch # C15410 is not pre-drilled for installation of a trailer connector mounting bracket but we do have an add-on kit. Part # C57202 is a no-drill long mounting bracket that can be used with a 7-way mounting plate like # 18138. The long bracket secures to your hitch tube with the included ring clamp and the connector mounting bracket bolts up to it. This Curt hitch will bolt on to your 2011 F-350 using the supplied hardware and existing holes in the truck's frame....
view full answer... - Class V Trailer Hitch Options for a 2002 Ford F-250 Super Duty 4x4 LariatWe have numerous Class V hitch options for your 2002 Ford F-250 Super Duty. I have listed them below. Curt Trailer Hitch, # C15410 2 inch receiver Curt Trailer Hitch, # C15810 2-1/2 inch receiver Draw-Tite Trailer Hitch, # DT45508 2-1/2 inch receiver B&W Heavy-Duty Hitch, # BWHDRH25230 2 inch receiver Tork Lift Trailer Hitch, # TLF1002 2 inch receiver Tork Lift Trailer Hitch, # TLF1002-30 2-1/2 inch receiver I have included links to the instructions for the hitches below. You can also...
view full answer... - Availability of Hitches to Fit 2007 Ford F-250 With 20 Inch Spare and 10,000-Lb Towing CapacityI spoke with my contact at Draw-Tite and he said the Draw-Tite Class IV 2 Inch Hitch, part # 41931, will fit your 2007 Ford F-250 with a 20 inch spare tire. The spare tire does need to be lowered when installing the hitch. This hitch is a Class IV 2 inch hitch with a maximum gross trailer weight capacity of 12,000 lbs. I am including a link to the installation instructions on the Draw-Tite hitch. I have the CURT Class V 2 Inch Hitch, part # C15410, that will fit with a 20 inch spare....
view full answer... - Trailer Hitch for a 2001 Ford F-350 Cab and Chassis TruckIf your 2001 Ford F-350 has the utility body then that means it was built on a cab and chassis model (originally did not come with a bed). Cab and chassis models have a more narrow frame width compared to regular pickup models. For a cab and chassis model and the same capacity hitch you would need # C15445. If you are not certain if you have a cab and chassis model or not you will need to measure the distance from the outside of one frame rail to the outside of the other frame rail. If...
view full answer... - Recommended Hitch and Weight Distribution With Sway Control for a 1999-2016 Ford F-250 w/ 8K TrailerIt never hurts to have a trailer hitch receiver that is over-rated for the application it will be used for; in fact, it is usually better to have a higher rated hitch. I don't know what year F-250 that you have, but the Curt Trailer Hitch Receiver # C15410 will fit Ford F-250's from 2005-2016 and F-250's from 1999-2004 that have a Standard or Step Bumper. This trailer hitch will work well for your application since it has a Max Gross Trailer Weight of 17,000 lbs and a Max Tongue Weight...
view full answer... - Trailer Hitch for a 2002 Ford F-350 with Knapheide Utility BodyUsually they put utility bodies like the one on your 2002 Ford F-350 on the cab and chassis versions of the truck (rather than the standard models that would come with a regular bed). You would need to look at the hitches for the cab and chassis models linked to the right. These hitches fit a frame width of 34 inches. This is measured from the outside of one frame rail to the outside of the other frame rail. If your measurement is 34 inches then you would look at the cab and chassis hitches...
view full answer...
- Trailer Hitch Recommendation for a 2012 Ford F350 DuallyThe tech tip for the Curt Hitch part # C15410 that you referenced that says, "Hitch fits vehicles with a 20 inch or smaller spare tire." is referring to the size of the rim. This hitch is confirmed to fit your truck so it should work well for you and will fit with your factory spare. If you are in the market for a new ball mount as well check out the link I attached that details how to pick out the correct one.
view full answer... - Replacement 2 Inch Hitch For 1999 Ford F-250 Super DutyI definitely recommend replacing the 2 inch hitch on your 1999 Ford F-250 Super Duty to be on the safe side. For a 2 inch hitch that will fit your truck and has the capacity needed to pull a large travel trailer go with an option from Curt: - Curt Trailer Hitch Receiver # C15410 The # C15410 has a 2 inch receiver but is a Class V hitch with a 1,700 lb towing and 2,550 lb tongue weight capacity so it's got the necessary bulk for your travel trailer.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video by:
Joshua S
Video by:
Alan C
Test Fit:
Nicholas E
Test Fit:
Shane T
Video Edited:
Jacob T
Video Edited:
Patrick B
Video Edited:
Andrew L
Video Edited:
Dustin K
Video Edited:
Sue W
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
1/13/2024
We will definitely have this taken care of for you. Customer Service will be in touch.