Ball Mount for 2000 Ford F-350 with Camper In Bed to Tow 2007 Hyundai Elantra on Tow Dolly
Question:
I want to pull a car dolly behind f350 diesel. I have 10.5 camper on an 8ft. Bed. I will tow Hyundia Elantra 07. Can I do it and what hitch do I need?
asked by: Doyle M
Expert Reply:
The first thing you are going to want to do is check the owners manual for the 2007 Hyundai Elantra to determine if it can be towed on a tow dolly.
If the camper in the truck bed sit on or overhangs the tailgate you will want to get a longer ball mount. The longest ball mounts we carry measure 16 inches from the center of the hitch pin hole to the center of the ball hole. Ball mount # BH20 has a 3/4 inch rise or 2 inch drop and is rated for 10,000 pounds.
If your 2000 Ford F-350 does not already have a trailer hitch you can use # C15410 for a standard or step bumper. This hitch has a 2550 pound tongue weight capacity and a 17,000 pound gross trailer weight capacity. If your truck has a deep drop bumper then you can use Curt hitch # C15316 rated for 2,400 pounds tongue weight and 16,000 pounds gross trailer weight.
Products Referenced in This Question
Brophy Ball Mount for 2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Long Shank
- Brophy
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class V
- 2400 lbs TW
- 16000 lbs GTW
- 17000 lbs WD GTW
- 2 Inch Hitch
- 2400 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class V
- 2550 lbs TW
- 17000 lbs GTW
- 17000 lbs WD GTW
- 2 Inch Hitch
- 2550 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Product Page this Question was Asked From
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Matte Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Shock Absorbing
- Convert-A-Ball
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Dexter Brake Assembly Recommendations to Replace Part Number 023-357-00
- Q&A: Can Demco Kar Kaddy X Be Used to Tow 2022 Chevy Spark with Automatic Transmission
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Q&A: Mounting Bolt Pattern For Ultra-Fab Phoenix Electric Trailer Jack with Remote # UF38-944055
- Article: Steel vs. Aluminum Ball Mounts
- Q&A: Can Curt RockerBall Hitch Ball be Used When Flat Towing
- Q&A: Torque Rating for Spindle Nut on Trailer Hubs
- Q&A: Turn Signals but No Brake Lights on Trailer tail Lights
- Article: Trailer Lighting Requirements
- Q&A: Trailer Idler Hub That Uses a LM67048 Bearing and Has a 5 on 4-1/2 Inch Bolt Pattern
- Article: Calculating Portable Generator Power Needs
- Article: What is Boondocking