bing tracking image
  1. Trailer Hitch
  2. Ford
  3. F-150
  4. 2014
  5. Draw-Tite
FITS 2014 Ford F-150
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Item # 75691
Retail:$257.80
Our Price: $165.36
Trailer Hitch
Confirmed to Fit
2014 Ford F-150

without factory hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Videos

Need help with installation?
Locate installers near me
Call etrailer.com at 1-800-940-8924 for expert service. We are your Ford trailer hitch experts, and offer a great price. etrailer.com carries a complete line of Draw-Tite products for your Ford F-150 2014. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" part 75691 from Draw-Tite can be ordered online at etrailer.com. Complete trailer hitch installation instructions and technical support.
  • All Info
  • Reviews (283)
  • Q & A (0)
  • Photos

2014 Ford F-150 - Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"

  • Class IV
  • 2 Inch Hitch
  • 6000
  • Concealed Cross Tube
  • 600
  • Draw-Tite
  • 12000 lbs WD GTW
  • 1200 lbs WD TW
  • Custom Fit Hitch

Fully welded Ford F-150 trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 6,000 lbs
      • Maximum GTW when used with weight distribution: 12,000 lbs
    • Maximum tongue weight: 600 lbs
      • Maximum TW when used with weight distribution: 1,200 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



75691 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

87583 Hidden Hitch Class 3 Trailer Hitch Receiver

Installation Details 75691 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
6,000 lbs.

Tongue Weight (TW):
600 lbs.


Weight Distribution Capacity
Gross Towing Weight (GTW):
12,000 lbs.

Tongue Weight (TW):
1,200 lbs.



No drilling required Manufacturer Estimated Installation Time

Tech Tip

No drilling required for installation , Spare tire will need to be lowered or removed temporarily for hitch installation




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" - 75691

Average Customer Rating:  4.9 out of 5 stars   (283 Customer Reviews)

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

by:

I found I had to lower my spare tire to use my impact wrench to tighten the front two bolts. The fit is good, and was not too hard for an old man to install in my driveway.



by:

Fair prices. Free shipping that is reasonably fast considering the distance, weight and size. Very easy to install. What took the longest during install, was finding a 7/8” open end wrench, that the directions said was needed, but after searching through tool boxes and eventually finding this wrench, I found that all I needed was two 3/4” wrenches. I like this hitch because you don’t see much of it sticking out from the truck and that is why I purchased this model.

Andrew

3/2/2020

A year later and I’m still happy. It does everything it should.



by:
2011 FordF-150

Trailer hitch got here when promised. Very easy to install with a helper. Took maybe 20 minutes total. Thanks.

Charles G.

4/5/2019

Trailer hitch receiver worked out very well. Pulled my trailer without any problem. Unfortunately have now gotten rid of my truck.



by:
2011 FordF-150

Bought a 2011 Ford F150 with no trailer tow package. I decided to add the trailer hitch myself. I started searching on Etrailer and ended up buying the Draw-Tite hitch. The kit came with instructions and all included parts. I installed it by myself in about 35 minutes. It looks great and already pulled my trailer with it without any problems. Great Product.



by:

If I would have known install would go so smoothly, I’d have gotten this a long time ago! Great piece of equipment!



by:
2010 FordF-150

Excellent customer service. Very quick on shipping. Easy to install as stated online when I ordered it. It took me 20 minutes from start to finish. I can't wait to tow my trailer now without using the bumper hitch. It will be so much nicer. I will definately use Etrailer again next time I need something for my truck. Thanks to everyone who took part in my order. Mel R.

p.s. pics didn't turn out so good.



by:
2009 FordF-150

Very please with etrailer and there product, received trailer hitch on time and exactly the way it would fit on my Ford F 150, I live in Houston and couldn't find the Hitch I wanted so I went online and found "etrailer "



by:
2011 FordF-150

I am very pleased with my new hitch. My order was promptly shipped by ground in three days. My wife and I installed the hitch in twenty minutes following the directions supplied. The hitch fit my 2011 Ford F-150 like a factory hitch. I have attached some pictures of my hitch.



by:
2014FordF-150

The Draw Tite Trailer Hitch is exactly what I needed. It's heavy-duty construction and easy installation made for an easy selection.



by:

I liked the ease of installation and that everything, except the receiver is concealed behind the bumper. I was satisfied with the price, delivery time and shopping experience as well.



by:
2014FordF-150

Perfect fit for my Ford F-150 4X4 . Towing is great no play in it. Installation was an easy tight fit.



by:
2014FordF-150

Just towed 6300 lbs with it last week, it is still just as strong as the day I installed it..
..Thanks etrailer



by:

2009 F150 stx class III hitch
Great
price, fit good, took 25 minutes, didn’t remove the spare tire.



by:
FordF-150

Item arrived a day early, I installed right away and it came out perfect! It so easy to install for one reason, it’s was made and designed exactly for the make/model of my Ford F-150 pick up. Thank you, etrailer!



by:
2014FordF-150

Beyond satisfied Great fit. Super quick shipping. Great tracking. Easy install



by:
FordF-150

Thank you for your speedy delivery. My hitch came yesterday and I put it on by myself in less than one hour. I used a floor jack to hold it in place. I did not remove the spare.



by:

Item arrived faster than expected, and was easily installed. I will be using etrailer again in the future.



by:
2009 FordF-150

Product fit great on my 2009 ford f150 and arrived faster than anticipated. Great product and GREAT company to order from. Highly recommend. Would not hesitate to do business with this company again.

Travis E.

3/5/2015

Patrick. Thanx for the follow-up. Hitch works great and still looks new. Great job guys. Keep up the good work.



by:
2013 FordF-150

Received my Draw Tite Trailer hitch one day before the expected delivery date. I love how tracking of shipping was provided to me daily. Trailer hitch looks terrific and I expect to install this week end if weather permits.

The only draw back I didn't like was that the free shipping on orders over $99 made me think that I only had that much time left showing on the screen. What I didn't know was that the clock start all over again each day that I have been checking it.

Jim M.

3/4/2016

I installed trailer hitch in approximatelu 30 minutes. I really like the way it is hidden under the bumper. Everything worked out just perfect. Extremely satisfied with everything



by:

Easy to install. Visually appealing, doesn't hang real low or protrude past the rear bumper. Don't look gaudy like some other hitches.
Performed with out any issues. I used it pulling a trailer every weekend for 5 months straight without any problems.
Recently I checked to make sure that none of the mounting bolts had loosened or that any of the metal had bent or cracked and found no probles.
Very satisfied with the hitch.

David H.

3/27/2021

Still very satisfied. No issues. Working fine.



by:
2010 FordF-150

after looking for several months, I came across etrailer.com. Wow....was I glad! They not only had the hitch I wanted, they had it at the lowest price of anywhere I'd checked. Ordering was a breeze....payment was easy,...and the shipment was a day ahead of schedule. Installation took all of 10 minutes and the hitch fits perfectly. I'll definitely be using these people for any other hitch/trailer accessories I need and thank you for such great service!

Joey C.

4/25/2018

Thanks for the follow up. The hitch has been doing just fine...no “hitches” whatsoever



by:

Fitment was right on. Simple install with a jack to hold up one side. 2013 F150 came without trailer package and 4-prong outlet is prewired and terminates below rear bumper without slack in wiring. Purchased 18" extension from a big box store for $5 and its something you could definitely sell as I had to order an unneeded pin to get me over the free-shipping threshold. Overall awesome service and delivery.

Mark

7/2/2020

Perfect



by:
2014FordF-150

Prgect fit & 20 minute installation.



by:
2009 FordF-150

Very please with etrailer and there product, received trailer hitch on time and exactly the way it would fit on my Ford F 150, I live in Houston and couldn't find the Hitch I wanted so I went online and found "etrailer "



by:
2009 FordF-150

I received my trailer hitch in record time and was very impressed. There was a glitch however with the product and so I contacted customer support and they were very helpful to arrange return shipment. They shipped out a replacement very quickly that was just perfect. It seems very solid and is a good fit with my vehicle. I will not hesitate to do business with etrailer again when the need arises!

Gt

4/26/2018

All good thanks


25
284
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Can Trailer Hitches for 2009 Ford F-150 Be Used with Weight Distribution to Tow More than 6,000 lbs.
    All of the hitches available for the 2009 Ford F-150 are rated for 6,000 pounds gross trailer weight and 600 pounds tongue weight capacity. However, all of the available hitches (see link) are rated for use with weight distribution which will allow the hitch to tow 10,000 pounds (# 13368) to 12,000 pounds (# 75691) depending on the hitch. These are ratings for the hitch, but not the truck. You will need to check the owners manual to determine if a weight distribution system can be used...
    view full answer...
  • Availability of Hitch for 2013 Ford F-150 With Factory Installed Tow Hitch
    There are two ways to add a hitch to your 2013 Ford F-150 that already has a factory hitch installed. The first is to add the TorkLift # TLF1005H. This is only designed for short bed models and trucks with a factory hitch rated for 10,500 lbs. It also installs along with the factory hitch instead of replacing it. The second option is to use the Draw-Tite Max-Frame # 75691 you were looking at. However, you can't simply install it by removing the existing factory hitch. You will need to...
    view full answer...
  • Could Draw Tite Hitch # 75691 Fit 2010 Ford F-150 with Dual Exhaust
    You'll have to compare the exhaust setup you installed on your 2010 Ford F-150 to the picture I attached to see if your aftermarket exhaust will fit with the Draw Tite # 75691. Our hitches like this have only be tested on vehicles that have factory exhaust so we don't can't say for certain if they will fit with aftermarket setups. Since this hitch is a bit narrower than most I could see it fitting though.
    view full answer...
    Image 1 for
  • Is Draw-Tite Class III Hitch 75691 Concealed Behind Rear Bumper When Installed on 2010 Ford F-150
    When installed on a 2010 Ford F150, the Draw-Tite # 75691 would be partically concealed behind the bumper. The receiver tube is the main portion that'll be visible, along with the lower portion of the hitch crossbar. The linked installation video will give you a good idea of what the hitch looks like once it's installed.
    view full answer...
    Image 1 for
  • What Model Years of the F-150 Does the Draw-Tite Max-Frame Trailer Hitch Receiver Part # 75691 Fit
    The product that you asked this question from is the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75691. This hitch fits a 2009 - 2014 Ford F-150 without factory hitch and a 2010 - 2014 Ford F-150 Raptor without factory hitch. I have attached a list of all of the trailer hitch receivers we have confirmed to fit a 2012 Ford F-150 for you as well.
    view full answer...
  • Draw-Tite 75691 Max-Frame Receiver Compatibility with 5, 200 lb Dry Weight Trailer
    The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75691 on your 2010 Ford F-150 does not need to be replaced. The hitch is rated for 6,000 lbs and 600 lb tongue weight without weight distribution and up to 12,000 lbs towing and 1200 lbs tongue weight when used with weight distribution. The hitch will work well for you and you will only be limited by your truck's towing capacity as your hitch will carry more than the max amount your trailer can tow so you definitely...
    view full answer...
  • Aftermarket Hitch Options for 2010 Ford F150 With Bent OEM Hitch
    I did some checking, and found that the hitch on your 2010 Ford F-150 is fully integrated into the bumper brackets so you can't just remove the existing OEM hitch and replace it with an aftermarket hitch like the Draw-Tite # 75691 you'd looked at. That's the bad news, but there are options. • You can go to a salvage yard and find a 2009-2014 F-150 that wasn't equipped with the factory hitch, and get the bumper and bumper brackets off of it and use those to replace what's existing on...
    view full answer...
  • What Does Weight Distribution Mean when Selecting a Trailer Hitch for a 2011 Ford F-150
    Trailer hitches are rated in two ways. The most common rating is weight carrying. This rating is for towing a trailer with a standard ball mount that transfers all of the trailer tongue weight to the towing vehicle. The second rating is weight distribution. A weight distribution system is used to reduce sag at the back of the vehicle when a trailer is attached and to transfer the tongue weight of the trailer to the vehicle and trailer axles, making the hitch capable of higher trailer towing...
    view full answer...
  • Recommended Trailer Hitch for a 2021 Toyota Sienna
    The hitch I recommend for your 2021 Toyota Sienna will be the Draw-Tite # DT55MR. This is designed specifically for the 2021 models. It is also a bolt on application, but you will need to trim or remove an underbody panel for the installation.
    view full answer...
  • Will Thule DoubleTrack Bike Rack Fit 2011 Ford F-150
    As long as your 2011 Ford F-150 has a factory hitch or an aftermarket hitch like the Draw Tite part # 75691 the Thule DoubleTrack part # TH92BJ will fit and work well.
    view full answer...
  • Differences Between Class III And IV Hitches For A 2012 Ford F-150
    Based on the sticker and weight ratings showing it would be a class III hitch. The difference between a class III like the Curt Trailer Hitch Receiver Item # C13903 and IV hitches like the Curt Trailer Hitch Receiver Item # C14002 is typically the weight ratings. The hitches we offer for the 2012 Ford F-150 are class III and IV. The Class IV has a 1000lb tongue weight and a 10000lb towing capacity and when used with weight distribution goes up to 1200lb and 12000lb. Our Class III hitches...
    view full answer...
    Image 1 for
  • Will the Draw-Tite Hitch For a 2011 Ford F150 Have a Factory Appearance
    The majority of this Draw-Tite Max-Frame Trailer Hitch Receiver # 75691 will be hidden behind the rear bumper of your 2011 F-150. It will have the same basic appearance that the factory hitch for this vehicle would have. The hitch opening will be visible, but most of the rest of the hitch will be hidden. Installation instructions are attached. You may be interested in the following products to complete your towing setup: etrailer Ball Mounts # EBMK4 Draw-Tite Wiring # 18252 (installation...
    view full answer...
  • Trailer Hitch Recommended for 2013 Ford F-150
    The actual towing capacity of your truck will depend on which 6cyl engine it has (3.37 or 3.5L), cab style and which gear ratio in the rear end it has. For the 3.7L engine, the max towing capacity number I see is 6700 lbs for a regular cab 4x2. For the 3.5L, 11300 is the highest rating I see. So, if you won't tow much over 5000 lbs, the Draw-Tite class III, part # 75691 would be a fine choice. If you'll be towing heavier trailers than that, I'd recommend the Curt Class IV, part # C14002...
    view full answer...
  • Trailer Hitch and Wiring Recommendations for a 2012 Ford F-150
    Draw-Tite trailer hitch # 75691 and the discontinued Hidden Hitch trailer hitch, 87583 are basically the same hitch from the same parent company. They even share the same instructions which I have linked for you. Either would be a good choice as the cross tube of the hitch would be mostly concealed behind the rear bumper on your 2012 Ford F-150 like in the video I have linked for you. I also recommend the etrailer ball mount kit # EBMK4. It comes with a ball mount, interchangeable ball...
    view full answer...
  • Parts Needed to Tow Safely with a 2010 Ford F-150
    First let's start with a brake controller. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. To install this controller in your 2010 Ford F-150 will only require the install harness part # 22292...
    view full answer...
  • Sway Control and Trailer Hitch Recommendation for a 2013 Subaru Outback Wagon
    For your 2013 Subaru Outback the Draw-Tite part # 75673 would be a great option for you as it has a 2 inch opening and Class III capacities. None of the hitches we offer for your vehicle are rated for use with a weight distribution system. Usually this has more to do with the vehicle than the hitch itself. Since the hitch manufacturers specifically say not to use a WD system I can't recommend one for you. Instead you could use a friction sway control unit like the part # 83660 to help...
    view full answer...
  • Does Use of Weight Distribution System Increase Trailer Towing Capacity
    Some trailer hitches will have higher tongue weight (TW) and towing capacities when used with a weight distribution/sway control (WD/SC) system like the Pro Series # 49570. As an example, the Draw-Tite Class III hitch # 75691 we offer for your truck is rated for 600-lbs of TW and 6K trailer weight without a WD/SC system, but those ratings double to 1200-lbs and 12,000-lbs when a system is used. Your hitch's safety/warning sticker will indicate if it has a higher rating with WD/SC. You will...
    view full answer...
  • Recommended Receiver Hitch for Class C Motorhome on 2003 Ford E-450 Chassis
    We don't offer a bolt-on hitch that would offer the capacity you're looking for, but we do offer some weld-on options that would get you where you need to be. In order to choose the correct hitch, you'll need to determine the amount of drop you need by measuring the vertical distance between the underside of the frame members and the lowest point of the rear bumper. You'll want to choose a hitch with a drop greater than your measurement. For a 3 inch drop, use # 15901, if that's not enough,...
    view full answer...
  • What is the Best Class III Hitch for the 2011 Ford F-150
    Without a doubt, for the 2011 Ford F-150, I would recommend the Draw-Tite Class III Max-Frame Trailer Hitch, # 75691, over the other hitches designed for this truck. For less than 20 dollars more than the competitors hitches, the # 75691 hitch has more towing capacity if used with weight distribution, has a curved cross tube for a better appearance under the rear bumper, and has a tab welded to the cross tube to accept brackets for trailer wiring harnesses. All of the hitches designed...
    view full answer...
  • What Is The Correct Hitch For 1995 Ford Mustang GT
    For the 1995 Ford Mustang, we have the Draw-Tite Sportframe Trailer Hitch Receiver, # 24687. This is a Class I rated hitch with a 1-1/4" receiver. It has a maximum gross trailer weight of 2,000 lbs. and a maximum tongue weight of 200 lbs. This is a bolt-on installation, no welding required. For a wiring, you will want the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, # 40505. This T-connector plugs directly into existing wiring - no cutting or splicing...
    view full answer...
  • Recommendation for Trailer Hitch and Weight Distribution System on 2013 Ford F-150
    Hello, we can certainly get you taken care of, please note the links to product reviews and installation videos I have linked. I suggest the Curt Trailer Hitch Receiver # C14002. This is a confirmed fit to your 2013 Ford F-150. This is a Class IV - 2" receiver with a tongue weight rating of 1,000 lbs. and max gross trailer weight of 10K extended to 12K when using a weight distribution system. This fully welded trailer hitch receiver bolts onto your Ford F-150's frame with no welding...
    view full answer...
  • Parts Needed for 2014 Ford F-150 to Tow Trailer with Electric Brakes
    We have everything needed to equip your 2014 Ford F-150 so that it can tow your utility trailer and power its electric brakes. The exact parts you need will depend a bit on what is already installed on your truck. Starting at the rear bumper, if you just have a 4-Way connector (and not a 7-Way round connector), I recommend using the Universal Installation Kit # ETBC7 to install a fully functional 7-Way. This kit also includes the additional wiring needed to install a trailer brake controller....
    view full answer...
  • Recommended Trailer Hitch for 2010 Ford F-150
    The trailer hitch that I recommend for your 2010 Ford F-150 would be the Draw-Tite # 75691. This durable custom fit Class III hitch has an easy, bolt-on installation so no welding is required. A complete hardware kit and installation instructions are included. If you plan to do some towing I recommend the etrailer ball mount kit # EBMK4. It comes with a ball mount, interchangeable ball set, a hitch pin with clip, and a carrying bag. For trailer wiring, use Draw Tite wiring harness # 18252....
    view full answer...
  • How Will Available Curt Hitches for 2010 Ford F150 Install in Relation to the Rear Bumper
    Curt actually offers three different hitches for a 2010 F150 (see link). Part # 13368 is a Class III with a square tube crossbar and # 13371 is a Class III with a round tube crossbar. Both hitches have a 600 lb tongue weight, 6000 lb towing capacity. A class IV, part # C14002 with a 1000 lb tongue weight 10000 lb towing capacity is also available. You can see the installation instructions for all three hitches by clicking on the provided links. As you can see by the instructions, all...
    view full answer...
    Image 1 for


< Previous
12



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Patrick B
Test Fit:
Patrick B
Employee Nicholas E
Test Fit:
Nicholas E
Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew L
Video Edited:
Andrew L
Employee Kathleen M
Video Edited:
Kathleen M
Employee Chris R
Video Edited:
Chris R
Employee Andrew K
Video by:
Andrew K
Employee Lindsey S
Written by:
Lindsey S
Employee Laura H
Updated by:
Laura H
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.