Recommended Trailer Hitch for 2010 Ford F-150

Question

Question:

I have a 2010 Ford F150 super cab can you tell me the hitch that is good for my truck.

asked by: Tim M

0

Expert Reply:

The trailer hitch that I recommend for your 2010 Ford F-150 would be the Draw-Tite # 75691. This durable custom fit Class III hitch has an easy, bolt-on installation so no welding is required. A complete hardware kit and installation instructions are included.

If you plan to do some towing I recommend the etrailer ball mount kit # EBMK4. It comes with a ball mount, interchangeable ball set, a hitch pin with clip, and a carrying bag. For trailer wiring, use Draw Tite wiring harness # 18252. If your F-150 has the tow package you can add a 4 way and a 7-Way with part # 74682.

For install details and some product demonstration videos, click the provided links.

expert reply by: Chris O

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

If you check out the attached picture you can see where you'll find the serial number and date code on your cover.

view full answer...

Answer 3

The 2" receiver for the EcoHitch item #EH87SR sticks out right through the middle of the air dam. I have attached a picture below that will show you what this front hitch looks like once installed. The EcoHitch Hidden Front Mount Trailer Hitch…

view full answer...

Answer 4

Technically none of the hitches made for the 2022 Ford Escape are designed to fit the PHEV model. However, we do have a review from a customer who successfully installed the etrailer #e89YR on their 2022 PHEV. They did take this to a local installer…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do have the parts you will need to add all the parts you need on your 2022 Toyota Tundra for towing. First you will need the Curt Trailer Hitch Receiver #C44BR. This is a custom fit receiver with a 2" receiver tube. For the electrical…

view full answer...

Answer 7

There are two ways to add a hitch to your 2013 Ford F-150 that already has a factory hitch installed. The first is to add the TorkLift #TLF1005H. This is only designed for short bed models and trucks with a factory hitch rated for 10,500 lbs. It also…

view full answer...

Answer 8

The connection point for trailer wiring on a 2005 Subaru Outback Wagon is usually located behind the paneling on the passenger side, directly below the tail light. I have included a video and the installation details for a similar harness that also…

view full answer...

Answer 9

Yes, the Curt hitch part #C86HR that you referenced does fit your 2019 Ford F-150 and will allow you to retain the spare you have stored underneath the vehicle. The spare does need to get lowered during the install process but it can easily be put…

view full answer...

Recommended Trailer Hitch for 2010 Ford F-150

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching