Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C13383
Our Price: $210.06
Confirmed to Fit
2018 Chrysler Pacifica
excluding Hybrid
Hybrid
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (69)
- Q & A (0)
- Photos
2018 Chrysler Pacifica - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Class III
- 2 Inch Hitch
- 4000
- Visible Cross Tube
- 400
- CURT
- 5000 lbs WD GTW
- 500 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your Chrysler Pacifica's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 4,000 lbs
- Maximum GTW when used with weight distribution: 5,000 lbs
- Maximum tongue weight: 400 lbs
- Maximum TW when used with weight distribution: 500 lbs
- Maximum gross trailer weight: 4,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13383 Curt Class 3 Trailer Hitch Receiver
Replaces 13286
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
4,000 lbs.
Tongue Weight (TW):
400 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
5,000 lbs.
Tongue Weight (TW):
500 lbs.
Gross Towing Weight (GTW):
4,000 lbs.
Tongue Weight (TW):
400 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
5,000 lbs.
Tongue Weight (TW):
500 lbs.
Tech Tip
The emissions canister bracket may require modification. Manufacturer does not recommend trailer towing with this vehicle. Please review vehicle owner's manual before towing. No drilling required for installation , Access holes may need to be enlarged by drilling, filing, or rotary tool , Underbody panel(s) and/or fascia must be temporarily loosened or removed. Trimming may be needed to reattach panel or fascia. , Exhaust must be temporarily lowered for installation
Complete Towing Package for 2018 Chrysler Pacifica
Package Price:$312.06
2018 Chrysler Pacifica Owners Who Purchased This Trailer Hitch Also Bought...
Replacement Parts Available For This Product
Popular Pacifica Trailer Hitch Accessories
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Too difficult to install
- Product did not meet expectations
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13383
Average Customer Rating: 4.4 out of 5 stars (69 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Adam B08/17/2019
2019 Chrysler Pacifica
Ultimately, the hitch went on (1 star for that) and looks good (one star for that) for a total of three stars. The installation though was not as advertised.
“Grounding stud” hole too small. Yep, had that. Had to “nudge” the stud a little with a hammer to get the hitch in position. This ultimately constrained the position of it so that, no matter how much I ground on the frame (for reasons left completely unexplained in the instructions but other reviews suggest it’s to help with carbon canister clearance) the hitch wasn’t going to move anyway!
Which brings me to the carbon canister clearance. Had to modify that (also not in the instructions) so that it cleared the carriage bolts and nuts. This wasn’t hard since the canister mounting brackets are plastic but completely unexpected and appears to have been addressed by Draw-Tite with a $100 auxiliary bracket. One other issue is that, on tightening, the carriage bolt spacers rotate into the carbon canister nutplate and cause it to misalign with the (large) hole in the frame for it. To get around this, I placed the canister mounting bolt, torqued the carriage bolt nuts, then removed the bolt, ground the frame hole, and installed a new bolt as the 6mm 10.9 bolt from the kit had no threads left.
Another one - the underbody panel trimming dimensions are not even close! See the photo. They’re off by nearly two inches from side to side and three inches along the length of the vehicle which, at the end of the day, doesn’t impact function but makes for a very frustrating and ultimately, ugly end result. How this is off by this much, I can’t begin to understand. Photos are included and I’m hopeful this can help someone get it right(er than I did).
CURT! Please repeat this installation, revise the instructions and pay more attention to the Hybrid version. etrailer should do the same for the Hybrid with a video. I shouldn’t have to scour the reviews (reviewers, thank you for helping to bail me out and, yes, I’m wishing I would have read them ahead of time because I wouldn’t have bought this).
I’ve done three other hitches including one Curt and two Draw Tites (and many other car projects) with zero issues. This one though took 5 hours and one unexpected trip to the hardware store for a new 6mm carbon canister screw. Not fun at all.
Recommend against this hitch :(
by: Michael 04/05/2024
Great hitch. I did need help installing it (I didn't have the proper jacks or the torque wrench). Tucks in nicely and holds my 4X bike rack like a champ
by: Jim06/26/2018
2018 Subaru Forester
Got this for a 2018 Pacifica Hybrid. Installation instructions were great, but it was a tough, two man job.
Unfortunately the receiver is does not stick out far enough from the bumper. As the hybrids are not rated for towing the primary use for the hitch is going to be bike racks, and with our 4 bike 1-UP in the stow position the rack winds up being too close to the car to open the hatch...not an issue on any of our other cars (prius v, forester). Receiver really needs to come out another 3" to edge of bumper. We can still make it work, just not perfect.
by: Dan 05/23/2024
Always watch the video prior to and during the installation. This is no time to get creative or think for yourself. The materials etrailer provides are excellent. Great site and customer service
by: Michael04/16/2022
2022 Chrysler Pacifica
Package was delivered in shambles the box was torn open and all the pieces to attach the trailer to the car were missing. Called them on Monday they promised to get them to us by Thursday as we were leaving Thursday night. The parts didn’t come til Friday. Too late we were already on the road without anything in tow :(. Customer Service was lacking to say the least
Jenny N.
4/23/2022
I will have our Customer Service team reach out to you.
by: Eric08/15/2023
2020 Chrysler Voyager
The hitch is strong and well made. Been lugging my bikes and ebikes with no issues at all.
I only rated it 4 stars because installation of hitch was a bit difficult because the holes did not line up. I needed to spread the hitch out with a jack because the way it sat in the warehouse, the metal shifted.
But overall it’s a good hitch.
.
by: John 02/17/2023
2020 Chrysler Voyager
Website very easy to navigate excellent communication from time order was placed to arrival
John
2/18/2024
Hitch is working very good
by: Tim06/06/2024
2022 Chrysler Pacifica
Nice hitch but installation was way more difficult than expected and I have installed 3 hitches in the past. Not for the faint of heart.
by: Steve07/22/2023
2017 Chrysler Pacifica
Hole tolerances for clearance holes were off, so I had to pull the whole thing off again and significantly open up a hole to get it to fit. Got it on there eventually but shouldn't have to modify a custom hitch.
Brooke M.
7/26/2023
Ypu arent wrong about that! You shouldnt have had to do any more than what the instructions outline. It sounds like your hitch was perhaps flexed or that maybe weld nuts needed to be brushed out to make them their proper size. They can get clogged with debris and many times require some cleaning before installation of a hitch. I went ahead and attached our help article about correcting flexed hitches.
Helpful Links
by: Corrina08/23/2023
Works perfect with my van. Im able to have cargo on the basket and still be able to open my lift gate. Use it all the time for camping and family trips.
by: Kate06/10/2022
Chrysler Pacifica
Working great on my Chrysler Pacifica Hybrid van! The mechanic had to do a little extra problem solving to get it to fit - but it did fit and it has been awesome!
Kate
6/11/2023
Works great on my 2017 Hybrid Pacifica Van!
Mike L.
7/12/2023
@Kate Niiice! We're glad the hitch is working well for you!
by: Stephen06/04/2023
It fits the hybrid, but the est of time of 90 min is extremely far off. It took me 5 hours. One longer bolt for the carbon canister on the hybrid would have saved time. I ground down the plastic which then fit over the front drivers side bolt. The cutout instructions are wrong for the splash guard. Having clearer instructions would have been nice. Maybe shine a light, all the photos are black.
by: Joe 06/01/2023
Customer is very happy with the hitch. Shipping was great. Product is great. Customer service is great.
by: Mark05/31/2020
2018 Chrysler Pacifica
Great product. Easy install. No drilling. Perfect fit.
by: David 12/07/2022
The trimming instructions for the heat shield, and especially the underbody panel, are vague and hard to follow. I ended up butchering the underbody panel in n order to get it back in place.
by: Todd10/26/2022
The hitch had scratches on both sides of the tubes. It appears that it’s used or it was dragged across the floor.
Jenny N.
11/2/2022
Thank you for reaching out. I will have Customer Service contact you. I recommend touching up the affected area with a rust resistant paint like Rustoleum.
Helpful Links
by: Bryan10/04/2021
2020 Chrysler Voyager
I found that this receiver is very well built. Heavy duty steel, well built except for one thing. On the 2020 Chrysler voyager I installed the receiver on, the grounding bolt on the driver side rear did not line up with the hole fabricated on the receiver. Consequently, I had to buy a metal cutting blade and remove the whole lug. It took a while to get it off. Definitely makes for a tough time when installing by yourself.
Sierra K.
10/14/2021
Depending how off the bolt is, it may be a flex issue. This is a common occurrence as hitch receivers are made of mild steel that flex with the vehicle. Here is a help article regarding the matter:
Helpful Links
by: Anthony08/11/2019
2018 Chrysler Pacifica
I have used this trailer on our Pacifica Hybrid for three road trips around the midwest, the product has only been used for a bike rack as the Pacifica Hybrid is not rated for towing.
The hitch has performed well with the vehicle. It did not sway or create any odd sounds. The one disadvantage is the hands-free lift gate sensors are blocked by some of the hitch and that function of the vehicle is impaired by the hitch. If that is not an issue for you this hitch is a great fit for those who want a fuel efficient van and the ability to haul some bikes on a rack.
by: Eric10/15/2022
The hitch had a few gouges and numerous scratches that would have been on the item prior to it being boxed. I am unsatisfied with the handling of this item.
Katrina B.
11/1/2022
Im sorry to see that your hitch has received some scratches on it due to shipping. This does tend to happen and when it does, we recommend using a Rust-oleum type paint to cover up any scratches and prevent corrosion in the future during use. I have a link below for your reference. I have also sent this information over to our Customer Service Department for them to get into contact with you.
Helpful Links
by: James08/05/2022
The trailer hitch itself is great - no complaints at all about quality, even after over a year! My one issue was simply that it didn't fit my chrysler pacifica hybrid (granted it was a newer hybrid that may not have been as well known) as promised without me making a small (but annoying) modification to my frame. Once that was done, all worked well, but it took much longer start to finish than expected.
by: Zach01/13/2019
2018 Chrysler Pacifica
I installed this on a 2018 Pacifica Hybrid. Mostly smooth sailing, except for 1 hiccup. I didn’t read the paper directions first, just watched the install video. Didn’t realize that there is a slightly different installation process for the hybrid, which the manufacturer recommends grinding the holes in the frame slightly larger to allow it to sit further back and avoid contact with the carbon canister on the driver side. Since I already had the hitch in place once I realized this issue, I searched some Pacifica owner forums and found an alternate solution, which involved slightly modifying the bracket which mounts the carbon canister to allow space for the hitch bolts. Wasn’t very hard, just a little extra time/work to figure it out. It would be nice for e-trailer to add a hybrid-specific install video.
All told, install took about 3 hours for 2 fairly handy dudes, including searching forums and such. Final installation looks pretty clean.
by: Paul05/31/2018
Dodge Grand Caravan
My only complaint about the hitch itself is that there is a small hole on the drivers side to accommodate a screw with a nut on the bottom of the car and the hole in the hitch is too small for the nut. I have done this job on a Dodge Caravan a couple of times before and found the Pacifica to be much more involved. First the bolts had to be installed into the frame of the car, then all the covers on the bottom of the car that needed to be removed, modified and reinstalled. It was a long and difficult process to do alone and without a lift. A floor jack is a must to lift the hitch and hold it in place while you put the nuts on and to take the drivers rear wheel off. There are 3 screws in the wheel well that hold the cover onto the rear bottom of the car.
by: Carlos 11/05/2021
2018 Chrysler Pacifica
This hitch is great! It is exactly what I needed for my hybrid Chrysler Pacifica 2018. I was able to install it myself with the instructions provided and I use it very often to transport my 4 bike rack and also a platform for extra storage. It looks great on our minivan!
by: Scott 08/12/2023
2023 Chrysler Pacifica
Awesome. Just what I ordered with great customer service.
by: Christine06/11/2021
2019 Chrysler Pacifica
Had my mechanic install this hitch on my 2019 Pacifica. He said it was a super easy install - no issues. Arrived earlier than expected. The receiver doesn't stick out very far as I expected from the photos, but we are still able to get large mountain bikes on our Kuat rack without the handlebars being too close to the van, in other words, it sticks out far enough for a bike rack.
25
69
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Recommended Hitch for a 2022 Chrysler Pacifica HybridBetween the Curt Trailer Hitch item # C29UR and item # C13383, I recommend the item # C29UR because it doesn't hang down as much. Both hitches are confirmed to fit the 2022 Chrysler Pacifica Hybrid and have identical 4,000 lbs towing capacities. However, the item # C29UR has a completely concealed crossbar. This not only looks better but also helps with ground clearance. The rear end of your van already sits low enough. You really don't want to drop your hitch receiver down any lower than...
view full answer...
- Will I Need To Enlarge Holes In Frame For The Curt C13383 On A 2022 Chrysler Pacifica HybridHello Tim. For the Curt # C13383 hitch, there is a chance you will need to enlarge the holes for both Hybrid and non hybrid models. It completely depends on the size of the holes in the frame rail. There can be some variances in the size of these holes. Some of the newer hybrid models have been noted to have smaller holes than other models, but this is not true 100% of the time. This is why we state you MAY have to enlarge holes. The verbiage in the Curt instructions make things seem more...
view full answer... - Which Curt Trailer Hitch For 2021 Chrysler Pacifica Limited Non-HybridHey there Tom, good question as you correctly noted a couple Curt hitches for your 2021 Chrysler Pacifica Limited non-hybrid. The appropriate one for you really depends on how you want it to look on your Pacifica. One has a visible crosstube and one has a hidden crosstube. If you take a look below you can see the differences, and here are the part numbers for both: - Hidden Crosstube: Curt Trailer Hitch Receiver # C65CR - Visible Crosstube: Curt Trailer Hitch Receiver # C13383 They otherwise...
view full answer...
- Curt vs etrailer Trailer Hitch For 2024 Chrysler PacificaJust a single difference exists between the Curt and etrailer trailer hitches for your 2024 Chrysler Pacifica, which is the finish. The etrailer hitch has a matte black finish, while the Curt hitch has a glossy black finish, so you can choose which you prefer. The hitches that fit your '24 Pacifica are the following part numbers: - Curt Trailer Hitch Receiver # C13383 - etrailer Trailer Hitch Receiver # e98903 The matte black finish does hide those inevitable small scuffs a bit better...
view full answer... - What Hitch Will Fit My 2022 Chrysler Pacifica Pinnacle HybridWhen it comes to installing a hitch on your 2022 Chrysler Pacifica Pinnacle Hybrid # C29UR will not fit your vehicle. Per the manufacturer The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 inch # C13383 will bolt right up to the frame of your vehicle. It has a gross towing weight up to 4,000 pounds and a tongue weight up to 400 pounds. I would check your manual to find out what the proper towing capacity is for your vehicle. Depending on if you will towing a trailer or not...
view full answer... - Best Trailer Hitch Receiver for 2020 Chrysler VoyagerThe best trailer hitch receiver for your 2020 Chrysler Voyager is the Curt Trailer Hitch Receiver # C13383 because it is a bolt-on installation that will not require drilling into your vehicle's frame to install, is assembled in the USA and has a 2" receiver. This is important because the larger receiver opens up many more opportunities for higher-quality accessories than the smaller 1-1/4" receiver of the other hitch that fits, the Curt Trailer Hitch Receiver # C12180. The Curt hitch...
view full answer... - What Trailer Hitch is a Fit for 2018 Chrysler Pacifica Hybrid Limited?There is a hitch that is a fit for your 2018 Chrysler Pacifica Hybrid Limited, the Curt # C13383. This is a Class III hitch with a 2" receiver, 400 lb tongue weight capacity and 4,000 lb towing capacity. To add a 4-flat wiring harness you would want the Curt T-Connector # C56322. If you are going to be towing, I recommend checking out Ball Mount Kit # 989900, which may fulfill your towing needs in one tidy package; two ball mounts - one with a 3/4” rise or 2” drop and the other with a...
view full answer... - Recommended Trailer Hitch for 2018 Chrysler Pacifica Both the Draw-Tite Class III Trailer Hitch # 76046 and the Curt Class III # C13383, which are confirmed to fit your 2018 Chrysler Pacifica, will require that the heat shield is trimmed/modified for proper installation. In both cases the heat shield does get reattached after the hitch is in place. Even when trimming the heat shield, your vehicle will still be protected because the installed hitch will essentially be taking the place of the trimmed off portions. Between the two hitches,...
view full answer... - Install Instructions for etrailer Hitch e98903 for 2018 Chrysler Pacifica HybridThe etrailer hitch # e98903 is a confirmed fit on the 2018 Chrysler Pacifica Hybrid and it also fits the standard version. The instructions for this hitch have been sent to you in a separate link. They will be essentially identical to the instructions for Curt hitch # C13383; those instructions are linked for you here.
view full answer... - Is C13383 2 Class III Hitch confirmed for 2019 Pacifica Hybrid?The Curt Trailer Hitch # C13383 will work with your 2019 Chrysler Pacifica Hybrid. Once using the fit guide you can then go to the top end of the page and choose between including or excluding Hybrid. I've included an install video of the Curt trailer hitch to give you some more info about the install. If you aren't set on buying the Curt hitch, our Class III Trailer Hitch # e98903 will work with the Hybrid models as well. Depending on what you plan on using with your hitch, here are...
view full answer... - Comparing etrailer and Curt Trailer Hitches for 2018 Chrysler PacificaFor your 2018 Chrysler Pacifica the best choice by far is the Curt part # C65CR because it has a hidden crosstube unlike the Curt hitch part # C13383. Because it gives you a better overall look and has even higher towing capacities it's the one I recommend as the best.
view full answer...
- Which Curt Trailer Wiring Harness Fits 2020 Chrysler Pacifica LimitedCurt has a trailer wiring kit that is a fit for your 2020 Chrysler Pacifica Limited but it's the part # C56322 and not the # C56399 that you referenced. Curt also has a hitch that fits your vehicle too with the part # C13383 as well.
view full answer... - 2018 Chrysler Pacifica Hybrid Hitch InstallationWe have both 1-1/4-inch Class II and 2-inch Class III hitches confirmed to fit the 2018 Chrysler Pacifica Hybrid that are shown on the linked page. Both Class II hitch # C12180 and Class III hitch # C13383 will require temporary removal and re-installation of the carbon canister on your hybrid's driver-side frame rail. It will be reinstalled using hardware supplied with the hitch. Instructions for both hitches are linked for your reference.
view full answer...
- What Frame Holes Need to be Enlarged to Install Curt Hitch on 2019 Chrysler PacificaFor the Curt hitch part # C13383 that you referenced you do have to enlarge holes on the driver side frame rail to fit the hitch on the hybrid models of the 2019 Chrysler Pacifica. I attached a picture that shows this. The picture on the left shows the square before picture and after you can see the shapes of the holes is a bit rounder. The only holes that would ever need to be enlarged to install a trailer hitch would be on the vehicle. None of the hitches we offer will require you to...
view full answer...
- Recommended Hitch for Carrying Bike Rack on 2019 Chrysler Pacifica HybridThe Curt # C13383 that you'd looked at would be an excellent choice for carrying bike racks. Curt does a great job with their powder coat finish which is why I typically recommend their hitches over their competitors. For bike racks, the hitch has a 400 lb tongue weight capacity which will handle the weight of your bikes and bike rack perfectly. If you could reply and let me know how many bikes you'll be carrying, and what types of bikes they are, I'd be happy to recommend a bike rack for you.
view full answer... - Best Hitch For 2018 Chrysler Pacifica and 4-Bike Platform Rack Yes Karine, we are still here to help! For the 2018 Chrysler Pacifica Hybrid, I recommend the Curt Trailer Hitch Receiver part # C13383 because it is a 2" hitch that fits the Hybrid model and has a more durable powder coat finish compared to some of the other options. Using a 2" hitch opens up more bike rack and accessory options compared to a 1-1/4" hitch. I also find the photos in the Curt installation instructions to be easier to follow. For the 4 bike rack the best option is a platform...
view full answer...
- Install Instructions for etrailer Hitch e98903 on 2019 Chrysler Pacifica HybridThe installation of the etrailer.com Trailer Hitch Receiver # e98903 will be the same as the Curt Trailer Hitch Receiver # C13383 for your 2019 Chrysler Pacifica Hybrid and I have attached the installation instructions of the Curt hitch for you so you can see exactly how to install the hitch on your Pacifica (the only difference between the two hitches is the matte black powder coat finish of the etrailer.com hitch compared to the gloss black powder coat finish of the Curt hitch). The...
view full answer...
- Trailer Hitch and Wiring for a 2017 Chrysler Pacifica LimitedIn addition to the trailer hitch # C13383 for your 2017 Chrysler Pacifica there are a few other items I recommend to set the vehicle up for towing. I also recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise or drop to tow the trailer level,...
view full answer... - Recommended Bike Rack That Can Carry 5 Bikes on a 2020 Chrysler PacificaOnce the Curt # C13383 is installed on your 2020 Chrysler Pacifica, it will sit 13 inches off the ground and the center of the pin hole will sit 5 inches behind the bumper. With that being said, you will need a rack that will extend out past 5 inches from said pin hole. The Thule Apex XT 5 Bike Rack for 1-1/4" and 2" Hitches - Tilting # TH9026XT will extend out 7 1/4 inches from the pin hole and will be the rack I suggest. This has the capacity for 5 bikes and a total carrying capacity...
view full answer... - Is There an etrailer Trailer Hitch Receiver for a 2018 Chrysler Pacifica with Glossy FinishYes, you can get the matte finish with the etrailer Trailer Hitch Receiver part # e98903 or gloss with the Curt Trailer Hitch Receiver part # C13383. They are the exact same hitch aside from finish. There really isn't a benefit for one over the other, it's more or less preference. I find that the matte finish blends in with the underbody paneling better on certain vehicles but it's again mostly preference.
view full answer... - Recommended 2 Inch Trailer Hitch Receiver & Wiring For 2022 Chrysler Pacifica TouringWe can definitely get your 2022 Chrysler Pacifica Touring set up with a Class III, 2 inch trailer hitch receiver as well as a 4-way wiring harness. Let's go ahead and start with the hitch, and the correct fit is from Curt: - Curt Trailer Hitch Receiver # C13383 Then for the 4-way and mounting bracket, the correct fit for your 2022 Pacifica Touring are the following: - T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56399 - Mounting Bracket 4-Pole Flat # 18144
view full answer... - Curt Trailer Hitch Fit For 2024 Chrysler Pacifica HybridI verified with Curt the correct trailer hitch receiver fit for your 2024 Chrysler Pacifica hybrid is the following: - Curt Trailer Hitch Receiver # C13383 If you plan on towing and also need a wiring harness the correct fit is part # C59236.
view full answer... - Recommended Trailer Hitch for 2018 Chrysler Pacifica Hybrid Limited For your 2018 Chrysler Pacifica Hybrid Limited, I recommend the Curt Trailer Hitch Receiver # C13383. This Class III hitch is confirmed to fit your vehicle and will use existing holes in its frame for a no-drill installation. This will provide you with a 2 inch receiver opening, a 400 pound tongue weigth capacity, and a 4,000 pound towing weight capacity. You will also want to check the vehicle's capacities by taking a look at your copy of the owner's manual, as you will need to follow...
view full answer... - Can I Carry A Hitch Mounted Bike Rack Or Cargo Carrier With My 2018 Chrysler Pacifica HybridGreat news! We do offer a a hitch for your 2018 Chrysler Pacifica Hybrid. I recommend the Curt Class III Round Tube Receiver Hitch part # C13383 because the 2" hitch will be the most versatile when it comes to accessories like bike racks. There are more options to fit the 2" hitch compared to the 1-1/4" hitch. The Curt 2" hitch is a glossy black powder no drill-installation hitch that can handle up to 400 lbs of tongue weight. If you prefer a matte black option for a more rugged look,...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Video by:
Kathleen M
Video by:
Zach D
Video by:
Schuyler H
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Written by:
Ronnie R
Test Fit:
Shane H
Test Fit:
Conner L
Test Fit:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Victoria B.
8/22/2019
Thank you for your review. Unfortunately we have not yet had the opportunity to install this hitch on a Pacifica Hybrid. We will keep your review in mind if we have the chance to perform this installation.