Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
(105 reviews)
Price: $222.94
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
Item # C14360
Our Price: $222.94
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (105)
- Q & A (0)
- Videos (2)
- Photos
CURT Trailer Hitch - C14360
- Class IV
- 2 Inch Hitch
- 10000 lbs GTW
- Visible Cross Tube
- CURT
- 1000 lbs TW
- 12000 lbs WD GTW
- 1200 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class IV
- Maximum gross trailer weight: 10,000 lbs
- Maximum GTW when used with weight distribution: 12,000 lbs
- Maximum tongue weight: 1,000 lbs
- Maximum TW when used with weight distribution: 1,200 lbs
- Maximum gross trailer weight: 10,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
14360 Curt Class 4 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2006 - 2008 Ford F-150 without factory hitch
- 2007 - 2008 Lincoln Mark LT
- 2006 - 2006 Lincoln Mark LT Built after 8/2005
Video of Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Curt Hitch Product Line Manufacturer Demo
With over 1,000 different trailer hitch designs, Curt is the first name in towing products. We make our hitches vehicle-specific to provide the best possible fit for each new make and model on the road today. Sophisticated design software, hands-on engineering, and quality steel, are all combined right here in the USA to make hitches that are perfectly suited for your vehicle and lifestyle. In our state of the art testing facility, our hitches are evaluated to ensure they meet or exceed all industry standards, and function at the level of quality and durability our customers expect. Curt hitches are made to last, featuring a cold cured liquid aquence 00:00:50 and highly durable powder coat finish to provide superior protection against rust, chipping, and UV damage. We're so confident in the quality of our trailer hitches that we back them up with a limited lifetime warranty. We work hard, so you can play even harder. Get out on the road, do more of what you love, and enjoy it for years to come with Curt. The first name in towing products..
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- Arrived Damaged
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" - C14360
Average Customer Rating: 4.9 out of 5 stars (105 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Ringo12/02/2023
The trailer hitch receiver came in quick from etrailer. All the needed hardware came with it and the receiver lined up perfectly with the truck. Installation took only a few minutes. It works great and has held up as expected.
by: Alex08/11/2023
2006 Ford F-150
Perfect fit, super easy to install! Didn’t have to take down my spare tire or adjust anything to make it work. Strong & sturdy. Took me about 20 minutes.
by: Joseph H08/16/2016
Ford Flex
Easy install. Everything lined up on my Curt trailer hitch receiver C14360. 30 min install.
Also bought the Hopkins in-sight flex mount brake controller HM47297 and the Hopkins plug in wire kit for ford to Hopkins controller HM47715. This adapter saved me loads of time installing controller another 30 min install.
All was left was find my factory wires for trailer brakes and 12v battery supply and I was finished. I would say I spent 1.5 hrs installing and .5 hrs cleaning up. I use this brake controller in all my vehicles.
by: Izzy b06/13/2017
2006 Ford F-150
Where do I start the product is excellent in aperance and construction. Everything about this curt hitch screams quality and strong including the grade A hardware. The only comment I have is regarding the ordering of the hitch I called and was told it would fit my 06 f150 with factory hitch. Upon arrival I realized it will not fit an 06 unless you go and get the factory bumper support. I was planning on returning but after taking a look at the quality I went ahead and searched out the dealer part. That should give you an indication how much I thought of the product.
by: Edward06/22/2020
The trailer hitch I ordered arrived on the exact date as indicated when ordered. Product was wrapped well to prevent any scraping and was un-damaged. As verified before I placed the order, it fits and installed perfectly. Dry pleased with the product. After much research, I found etrailer has the best price and the product is well built. Would shop this company again and would recommend to family and friends.
by: Filip T07/13/2021
It fits perfectly on my truck, all the photos on the website were the decisive factor for me, knowing that I will order the exact model that fits this car, not just another ‘universal hitch’
It arrived in 5 days total, as I was told from the beginning.
Free shipping and tracking number.
Great service!
by: Ronnie11/14/2019
2008 Ford F-150
Receiver hitch was solid & good quality. I'm an old man and it took me about 45 minutes to install.... Impressed how accurate the hitch receiver holes and my F150 frame holes lined up for the attaching hardware (bolts & nuts). Pretty simple to install and happy that I saved money and time. Recommend it.
by: Larry07/01/2023
2007 Ford F-150
A quality product and the installation was easy less the 20 minutes. Fast delivery and I would order again.
by: Linda R09/17/2017
2006 Ford F-150
After we loosened the bumper bolts so we could adjust better, the attachment was a breeze!!! Went on without a "hitch"...
by: John06/12/2021
Very good product for the price. Well built, easy to install with the included instructions which are well laid out. Took less than 30 minutes to install.
by: Malcolm04/06/2017
2007 Ford F-150
Went on with no problems, all the correct fasteners were provided
by: Tom s Auto09/11/2017
Everything was AA+. Customer service to shipping.. Product arrived a day ahead of schedule.. will definitely use them again.
by: Dario S. 09/10/2016
2007 Ford F-150
Perfect fit and installed very quickly!! Super fast shipping too!! Now we're ready for the Family Camping trip!!!
Dario S.
10/25/2017
Thank you. The hitch still performs perfectly.
by: Tinker10/01/2022
2008 Ford F-150
Overall the receiver is fine, I just wish it mounted as easy as your video shows. I don't know if it was a lack of precision in the receiver construction or if my 2008 F-150 was a little off spec, but the flange supports that attach to the frame were sprung a little wide and didn't slide in easily at all. On my third attempt, flat on my back in the driveway, I used a pipe clamp to squeeze the flanges in far enough to jack them into position. My 75 year-old body is worn out, but I'm happy with end result.
Mike L.
10/10/2022
Trailer hitches are constructed so that the mounting flangesside plates are made of softer metal so the hitch can flex along with the vehicle when necessary. Because of this, the hitch can get flexed during shipping and handling. There are simple methods to get the hitch back into position, as shown in the article Ive linked for you.
by: Warren 06/25/2023
2007 Ford F-150
Installation was very easy, just needed another pair of hands.
by: Roy 04/08/2021
My Curt Custom Fit Class IV 2" receiver has been a great choice for my hitch need. It fit perfectly and has worked well for pulling my hay trailer around the farm, gravity wagon to the co-op and back for feed and pulling my utility trailer for spreading mulch.
Roy
4/12/2022
Still very pleased with my purchase. I don’t think about it because I know it’ll do what I need it to do. Just hook and go. So glad I purchased it.
by: Dave07/16/2017
2007 Ford F-150
Hitch has nice finish. Bolted on to truck nicely, definitely need to loosen 4 bumper bolts 2 get hitch 2 bolt up on frame. Use floor jack with small 2x4 to hold hitch up 2 install bolts & 2 realign bumper level with body.
David Y.
7/16/2018
Great, like it should, pulled a 5000 lb. load with no problem.
by: Michael09/27/2022
Installed it in about an hour. No problem with the hitch, my bumper was bent. Needed to use a floor Jack and some oak blocks to get it properly aligned. I’m an old guy and a second pair of hands would be recommended. Great product.
by: Michael07/06/2021
2006 Ford F-150
Trailer hitch shipped out sooner than expected. Perfect fit for 2006 F150. Easy to install matched up too hole sin frame, only 6 bolts.
Michael
7/7/2022
The Curt trailer hitch has preformed well with no problems.
by: Rodney H04/02/2018
2007 Ford F-150
Just Got the Curt Hitch Receiver for our 2007 F-150, 20-30 Min install, I never had to loosen my bumper bracket bolts or spare tire, Fits great, highly recommend this product.
Rodney H.
4/2/2019
Works Great ! I recommended it to a Friend who bout a new Dodge Pickup he bought one also toke us 20 minutes to install now hes taking me fishing. Cant beet that.
by: Donovan 10/30/2022
I have had the hitch on the truck now for a year and zero issues. Installation was simple and fitment was spot on!
I will purchase this brand of hitches for my next truck if it doesn’t have one already.
by: Jerome S10/15/2019
Didn’t have the tools to install this myself, plus I realized I needed to remove my bumper as well. I ended up taking it to my mechanic and he installed it lickety split! Couldn’t be happier with the hitch.
Jerome W.
10/16/2020
Product is performing just like I expected. A-OK!!!!
by: Bruce05/14/2021
really fast shipping was as stated . installed in less than 20 min. very happy would recommend them for any of your hitch needs.
Bruce
5/15/2022
it has been a very good hitch I am happy to say I will recommend your products any time.
by: Carlos12/10/2018
2006 Ford F-150
Product bolted on just as it said, installed trailer wiring with no issues and installed brake control with no issues. being using the hitch for about a year pulling a 31 foot travel trailer, product works great. would recommend to anyone looking to install a trailer hitch.
by: Randy R.08/10/2017
2008 Ford F-150
This was the easiest hitch I have ever put on a truck very simple
25
105
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- How To Determine The Correct Torque Specifications For a Class IV Curt Trailer Hitch Receiver Curt lists the torque specs for the Curt Trailer Hitch Receiver # C14360 as 210lbs-ft for 5/8" fasteners 110lbs-ft for 1/2" fasteners in the installation instructions, which I've also attached below. Manufacturers do some times change the torque specifications so it's best to look for the most recent version of the installation instructions or check the size and grade of the bolt and using this information to look up the recommend torque specifications.
view full answer... - Will Curt Trailer Hitch Receiver C14360 Fit a 2005 Ford F-150The # C14360 is for the 2006-2008 Ford F-150 without the factory receiver. For a Class IV hitch that is confirmed to fit your 2005 Ford F-150 I recommend the Curt Trailer Hitch Receiver # C14357. This hitch has a 2" receiver with a maximum gross trailer weight of 10,000 lbs and tongue weight of 1,000 lbs. just like the # C14360. Keep in mind, if you have a factory hitch installed this will not fit your truck. If you plan on doing some towing and don't have wiring, I recommend the Curt...
view full answer... - Hitch and Brake Controller Install Harness Recommendation for 2008 Ford F-150For your 2008 Ford F-150 the Curt hitch part # C14360 is a confirmed fit and would be a great option. To install a brake controller in your 2008 Ford F-150 you would be able to use the brake controller port under the dash and you will need to complete the wiring at the rear of your vehicle to the 7-way (# 37185) at the rear of the truck. The install harness you would want is the part # 3035-P and then also the part # 37185 to convert the 4-way to a 7-way. I attached a help article that...
view full answer...
- What Vehicles Does the Curt Hitch # C14360 FitThe Curt hitch part # C14360 that you referenced fits the following vehicles: 2007 - 2008 Lincoln Mark LT 2006 - 2006 Lincoln Mark LT Built after 8/2005 2006 - 2008 Ford F-150 without factory hitch
view full answer... - Will Trailer Hitch From Different Vehicle Fit 2007 Ford F-150Trailer hitches are typically custom-fit for specific model and year vehicles. It is very unlikely that a trailer hitch from another make or model will fit your 2007 Ford F-150. With this in mind, I took a look through the trailer hitches available for your 2007 Ford F-150 to see if they also are a fit for other vehicles. The trailer hitches for your particular F-150, such as the excellent Curt Class IV Receiver Hitch # C14360, are also a fit for the 2006-2008 Lincoln Mark LT. A trailer...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Video Edited:
Zack K
Video Edited:
Jacob T
Expert Research:
Jameson C
Written by:
Laura H
Test Fit:
Randy B
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Tom A.
9/11/2018
Hitch went on a customer vehicle...Replaced his existing CURT hitch. Very nice hitch & easy to install.