To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 5.0 out of 5 stars (17 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Great hitch, works well! The install, was straight-forward and instructions easy to follow. Would recommend Etrailer to anyone.
Love this hitch. I installed it on my 2019 XC90 Volvo T5. It is a perfect fit. The Volvo Dealership (here in San Diego) sells the $2,200 option including labor and that just seemed to high to me and probably to you for a hitch, even if it is a motorized hitch. I want to add a few personal notes that you may find helpful. I was so happy with this I am planning on getting the hitch for my wife’s 2019 XC60.
1. Do watch the video on the site twice. I was very helpful. I actually had it nearby during the installation. Much easier than reading the paper.
2. I used a 19mm socket on the 1/2” bolts that are provided. That was not detailed anywhere although you could figure it out. But if you are like me and needed to buy some tools that is what fits.
3. There are already holes in the frame that you can use to feed the hardware through (near the axle). You might need to extend the feeder wires to use them but it saves you drilling the larger hole to get the hardware in. You will see it when you are under the car. I didn’t take the picture.
4. If you don’t have them you can easily buy drive on ramps (for pretty cheap) to raise up your vehicle enough to do this job safely. They gave plenty of safe room to work.
5. The trim for the heat shield instructions in the video mostly apply. You will need to do a little extra than what they suggest on the 2016 model in the video
6. MAKE SURE you have the muffler hangers attached to the muffler before you do final assembly. I took mine off for ease of testing the fit and marking the holes to drill. I didn’t put them back on before final install and what a difficult time I had getting them back on. You don’t want to drop the hitch because you might lose your 1/2” bolt.
Other than that I love it. Could not be happier.
Thanks
Great that it didn't need to cut or adjust bumper. Sits a little low, but hitch ball and assembly can be bought to sit high. Not very noticeable. Really have liked it.
Overall, great product considering the alternative from the Volvo dealer is literally 10x as much.
A few notes though, I'm reasonably good with a wrench and have installed several hitches over the years. This one was the hardest, and took me 3 hours, not 2 as listed in the instructions for a novice.
I have a 2022 XC90 so the heat shield may have changed a little, but more cutting is required, especially around the rearward bolt, than described in the instructions. Also, the instructions never tell you to reinstall the heat shield, so don't forget that!
You don't have to remove the bumper cover, you can wiggle the heatshield out without removing. In new cars with parking sensors, they are a pain to remove.
Finally, the kit would have more complete if 4 small bolt retainers were included. These look like little toothed plastic washers that would hold the captured bolt in place while you are reinstalling the 45 pound hitch over your head on your back. Instructions say to use the fish tape to thread through the bolt holes in the hitch, but I think you would need 3-4 people under the car to make that happen. I only had a 15 year old helping me.
Again, great product, would buy again, but not a simple install.
Trailer has worked very well and made hauling bikes much easier! Thanks for the great support during the installation process!
The Curt Trailer Hitch is very solid/strong. Well manufactured. The installation video is excellent although it takes closer to three hours to install and best to have a helper.
To install is no need for a bigger hole, 5 inches to the front of the car is a big hole from the factory. Is what I used. For the back bolts I extend the rod on the coil wire.
Great product, very good quality. The video instructions on the website were spot on. Had to buy a large step up drillbit which was 75 bucks at Home Depot but other than that it was pretty easy. Only other tip would be to trim a little bit more than you think you’ll need to from the heat shield before you put it on. It looks great on my 2020 XC 90.
The representative displayed complete professionalism! She was very informative and helpful. This customer experience leaves me feeling very happy with Furture purchases from etrailer down the line .
The product looks and works great. The install Video was easy to follow along and pretty much applied to my 2019 Volvo XC 90.
very good hitch, works like it supose too. Was easy to install.
Working as a hitch should!
Simple install and looks great!
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tony Y.
8/17/2023
High is working very well, no issues!