bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class III
  4. 2 Inch Hitch
  5. 4000 lbs GTW
  6. Concealed Cross Tube
THIS ITEM IS NOT A FIT FOR
2008 Jeep Grand Cherokee

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 13344
Retail:$370.09
Our Price: $219.52
You Save: $150.57
Trailer Hitch
Not Confirmed to Fit

2008 Jeep Grand Cherokee

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 34 lbs
Add to cart
In Stock
13344 - 4000 lbs GTW CURT Custom Fit Hitch
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 13344 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (50)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - 13344

  • Class III
  • 2 Inch Hitch
  • 4000 lbs GTW
  • Concealed Cross Tube
  • CURT
  • 400 lbs TW
  • 6000 lbs WD GTW
  • 600 lbs WD TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA, bolts overseas


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 4,000 lbs
      • Maximum GTW when used with weight distribution: 6,000 lbs
    • Maximum tongue weight: 400 lbs
      • Maximum TW when used with weight distribution: 600 lbs
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13344 Curt Class 3 Trailer Hitch Receiver

Installation Details 13344 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13344

Average Customer Rating:  4.7 out of 5 stars   (50 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:

This order arrived quickly,the box was torn open but due to proper packaging , nothing was missing.
I installed the hitch without any problems at all. Custom made for the car, PERFECT FIT. It looks like it was always there installed at factory. When a need to purchase a hitch receiver, Curt hitch has my business. Really no need to look elsewhere. Excellent product.
Thank you for letting me give my opinion. Ray



by:
2009 Pontiac Montana SV6

Shipping fee a little high and price. But product is a perfect match.

Louis-philippe

7/21/2023

Yes, Its mounted safely on the back of the Montana.



by:

Very well made, sturdy trailer hitch, the fitment seems pretty good. Shipped quickly but the box arrived damaged and the hitch was scratched, wish the packaging was sturdier. The installation hardware is excellent, especially the nifty fishing tool for the hidden bolt in the frame rail. The instructions were a bit confusing as to where the spacer blocks are supposed to be positioned, they need to be rewritten. Despite my minor complaints I'm happy with this purchase.

Ryan W.

7/10/2018

Still happy



by:

This was fairly easy to install. The only issue I have is the electrical connector which never locked into the bracket (which I purchased as well). I have to hold it in place in order to attach any connector to it...

Etrailer Expert

Heather A.

11/17/2018

It looks like the hole in the bracket is 1 3/8 in length. The 4 way connector plug that you are using may be slightly shorter. Ecohitch now offers a 4 way bracket that is a magnetic mount that will keep your plug securely against the hitch. Part # 306-X6019 mounts to the hitch or the vehicle.



by:

The shims under the passenger side were too big and I had to grind one of them down. Also the shim that goes up in the frame rail does not fit and I will have to grind it down to fit the hole. Other than that it looks like a good product

Dave S.

3/20/2015

used the hitch to pull my Goldwing motorcycle 1500 miles to AZ with no problems. The hitch works well.



by:
Oldsmobile

I received all items as listed, packed well and no dings or dents.
Installation went as instructed. Holes drilled and 6 bolts in place, no problem. EXCEPT for the ol blind bolt. This is a real pill and I believe that a shop would modify the hole in the frame to enlarge it to facillitate this bolt installation. I installed this bolt in my garage and ended up drilling a small hole in the two plates so I could hold them in place while fishing (good work for this task) the bolt into position (while not disturbing the TWO plates) and bringing it down through the frame while holding th two plates (still) in position. The wiring started out fine, the "T" went together but routing the wires is another issue. I have the rear air conditioned van and the heat exchanger (radiator) and fan and piping are on the same side as this interconnect. But I will find a way to route this wiring through the chassis to the outside world! 2001 olds van
Would I do this again -- absolutely -- thanks Howard

Would I do this again -- absolutely -- thanks Howard " />


by:

Customer service was great and the product fit perfect as descibed online. I would definitely use your company again and again infact i'll purchasing another hitch for my other work van. I appreciate you following up a year later. If you have any type of sticker, i would not hesitate to put it on the hitch or any product to advertise for you because when your company does good then you can continue to support your customes with great service and products



by:
2002 Oldsmobile Silhouette

This was ordered for a minivan. It was boxed and shipped and came to my house in excellent shape. The video instructions online helped out a lot in the installation. I had no problems at all with mounting this on my minivan. Thanks much to etrailers for an excellently boxed and wrapped package. No hardware was missing. UPS did a wonderful job caring for the package as well.

I am totally satisfied with the product.

Thank You Etrailer.com



by:

Fine Product it went on like they said everything was there as presented all you need is some time a few tools they suggest and you are set to install at your leisure . Hitch up and go . Thank you to all at etrailer and for the informative video .



by:

Trailer went up beautifully and love the wire to feed the bolts through the Holes . Had no problems installed the hitch, it took about an hour and a half. I got my product within three days , wiring harness was exactly the one for my vehicle plug right in . Thank you guy's. Will call you first Next time I need a hitch.



by:

This is the 3rd trailer hitch and wire harness I purchased from etrailer.com. As with the other 2 hitches I received this one within a few days, all came in good shape with instructions, installed quickly, and was using it the same day. Couldn't have worked out any better.



by:
2005 Pontiac Montana SV6

I ordered a hitch and harness from Mark and received it 2 days earlier then expected. That was great. I made a mistake and ordered the wrong harness and called Mark explained the problem, he said no problem and within two days I received the right one.

Thanks Mark for helping me correct MY mistake.

You Guys ROCK!!!



by:

This is not the first hitch i have purchased from e-trailer ,the web site makes it so easy to look up the exact product that i am in need of and it has always been quality hitch's.Thank you so much for shipping our product out to us fast and accurate .you will definitely see us again.



by:

Received Trailer Hitch with fast delivery. Hitch is well made. Watched video to help facilitate installation. This hitch will take extra work (had to drill 3 holes in frame rails) but fit was excellent. I wanted a hitch with a class IV rating. Installation not as difficult as rated unless you are not mechanically inclined. I highly recommend etrailer.com !



by:

Best customer service have had in a long long time ,great product , fast delivery, easy to install , had a little trouble with wiring but after talking to Bill found it was nec to remove part of rear a/c housing to find connector plug, after that everything was a breeze.

Thanks for great service.

CLP



by:
2000 Pontiac Montana

I was amazed that I could find a hitch that was made for my 2000 Montana van! Still a great car with lots of miles left in her! I needed a product with a 2" receiver, and this is perfect! :-).



by:

I haven't had time to open the box yet, but I have dealt with this company before and was very satisfied. This time was even better as they contacted me to let me know that what I ordered would not work together, with their help, I now have the right parts, I'm sure



by:

Director We get fast delivery on most products. The only thing we need to be careful about is multiple items on a single order. The hitches are sometimes labeled wrong to show us the hitch number in the box is not always the same as on the label.
Otherwise outstanding services and prices.

Thanks



by:

Sturdy,with nice paint. Hole for receiver is a little large. Receiver hitch bangs around. Had to put pads in. Yes ,both are 2"



by:

Good hitch relatively easy install. The only problem I really had was fishing the bolt through the frame. The hole just could have been a bit larger than the spec'd 1/2 inch, but by the time I found that out I couldn't get the bolt back out without losing it so I had to use my dremel tool to open it up some more. Went well though.



by:
2008 Chevy Uplander

Received hitch four days after I placed ordered on Saturday, Thanks
Hitch instruction were excellent and installation was done within one hour.
Looks great on the 2008 Chevy Uplander
Thanks



by:

all products are of good quality , installed nicely, the staff at e trailer were a pleasure to work with to get me the right stuff for my truck. its all good thanks john



by:
2008 Chevrolet Uplander

eTrailer has been my go to place for many years. Again, this order did not disappoint.
We can now haul the Harleys with the new car!



by:
2001 Oldsmobile Silhouette

Fast delivery. installation took minimum effort. would recommend!



by:

excellent fit and installation quick and easy.


25
50
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Will Curt Class III Trailer Hitch Fit Short Wheelbase 2000 Pontiac Montana?
    Yes, the Curt Class III Trailer Hitch, # 13344, will fit your 2000 Pontiac Montana with a short wheelbase. This hitch would actually be my recommendation for you. I usually prefer Curt trailer hitches because I know they like to be a little liberal with their powder coating and in this case, it has the highest weight capacities of any hitch for your van so it has plenty of built-in safety margin. All of the wiring harnesses for your vehicle are basically the same thing, but built by different...
    view full answer...
  • Manufacturing Location of Curt Class III Receiver Part # 13344
    Curt Hitches, including the Class III receiver part # 13344 are manufactured in the USA.
    view full answer...
  • Will Trailer Hitch From 1999 Chevrolet Blazer Fit A 2001 Chevrolet Astro Van
    The trailer hitches that are designed for a 1999 Blazer will not fit on a 2001 Chevrolet Astro van. For the Astro I recommend the Hidden Hitch Trailer Hitch, part # 87516. This is a Class lll hitch and it has a 2 inch receiver opening. There is no drilling needed when installing this hitch on the Astro.
    view full answer...
  • Trailer Hitch, Ball Mount, Hitch Ball, and Trailer Wiring for a 2009 Chevy Uplander
    I spoke with my contact at Curt and she stated that, technically, Chevy stopped making an Uplander for the US market in 2008 so there is no 2009 model. They did continue to make them for the Canadian market which is why the Tech Tip states the hitch is for that market. However, she stated that as long as your 2009 Uplander has the 121 inch wheelbase, the Curt Hitch, # 13336 will fit. If yours does not have a 121 inch wheelbase, or you are not certain, she stated you could use Curt Hitch...
    view full answer...
  • Trailer Hitch that Fits 2008 Chevy Uplander with 109 inch Wheelbase
    Yes, for your 2008 Chevy Uplander with a 109 inch wheelbase part # 13344 is a confirmed fit. I attached an install video for you to check out for more info as well. For trailer wiring you then would want the part # 118396. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin...
    view full answer...
  • What Vehicles Does the Curt Hitch part # 13344 Fit
    The best info I can give you would be to give you the fit info for the Curt Hitch part # 13344 that has been confirmed as a fit for your 2002 Chevy Venture. This hitch will fit the following vehicles. 2005 - 2007 Saturn Relay 1997 - 2004 Oldsmobile Silhouette 2005 - 2007 Buick Terraza 2005 - 2009 Chevrolet Uplander 1999 - 2005 Pontiac Montana All Models 2005 - 2006 Pontiac Montana SV6 All Models 1997 - 2005 Chevrolet Venture All Models 1997 - 1998 Pontiac Trans Sport Van All Models,...
    view full answer...
  • Recommended Trailer Hitch And Trailer Wiring For 2003 Chevrolet Venture
    We have a few options for trailer hitches for your 2003 Chevrolet Venture. The # 24773 is not designed as a fit for your vehicle. My recommendation for a trailer hitch is the Curt Trailer Hitch, part # 13344. This is a Class lll hitch and has a 2 inch receiver opening. I recommend this hitch because it is more versatile than the Class ll or Class l trailer hitches with a 1-1/4 inch receiver opening. You can attach many more accessories and the hitch has a higher weight capacity. I have...
    view full answer...
    Image 1 for
  • Replacement Bolt Kit for a Curt # 13344 Hitch on a 2007 Chevrolet Uplander
    Yes, we have hardware kits available for all of the hitches we carry. Just put # RHK, replacement hardware kit, in the search box, then add your hitch part number and the manufacturer to the boxes on the product page and you will receive all of the installation hardware needed for the hitch. At this time we do not sell individual hardware parts for liability reasons. Hitch installation hardware is torqued to fit and is designed for a single installation only, so replacement hardware is...
    view full answer...
  • Hitch and Trailer Wiring Harness for 2006 Saturn Vue
    The Curt # 13344 Class III hitch is a fit for 2000's era GM minivans, and wouldn't fit your Vue. This being said, we do indeed have hitch and trailer wiring harness fits for your 2006 Saturn Vue. For a hitch, I'd recommend the Curt # 13591. If you click the provided link, you can see an install video showing this hitch being installed on a 2006 Vue like yours. For a trailer wiring harness, use # 118418. See the linked video for installation details. You'll also need a ball mount and a...
    view full answer...
  • How to Determine the Towing Capacity of a Vehicle
    To determine the towing capacity of your 2006 Chevy Uplander you will need to consider the capacities of every thing in your towing setup and go with the lowest rated component as the overall capacity since a setup is only as strong as it's weakest component. So if the owners manual of your vehicle has a lower capacity than the hitch you installed like the # 13344 which has a 4,000 lb trailer and 400 lb tongue weight capacity then the lower figure would be the overall capacity. According...
    view full answer...
  • Trailer Hitch And 7 Pin Wiring Setup For A 2008 Chevy Uplander
    We can definitely set you up. For a trailer hitch for your 2008 Chevy Uplander we do have a no drill option # 13336. This will only fit models with the 121" wheel base. If you do not have the 121" wheel base I recommend the # 13344, which will require some drilling. Both hitches are rated for 4,000 lbs towing and 400 tongue weight. For your 7 pin round plug trailer wiring and brake controller, you will need the following parts. T-One Wiring Harness # 118396 Universal Install Kit # ETBC7 Prodigy...
    view full answer...
  • Will the Curt Hitch 13344 Fit a 2003 Oldsmobile Silhouette and What Hardware Is Needed
    Yes, the Curt Trailer Hitch Receiver part # 13344 is a confirmed fit for your 2003 Oldsmobile Silhouette. The Curt Trailer Hitch Receiver actually comes with all of the fasteners needed for installation so nothing needs to be purchased separately. If you are missing these fasteners then you can obtain them with the Replacement Hardware Kit for Trailer Hitches part # RHK. If you will be towing a trailer with your Oldsmobile Silhouette you will also need a trailer wiring harness, the Curt...
    view full answer...
  • Can Hitch From 2003 Dodge Caravan Be Installed on 2004 Pontiac Montana
    Trailer hitches are vehicle specific, so they typically won't fit a vehicle they weren't designed for. The rear frame structure of the 2003 Caravan and the 2004 Pontiac Montana are different enough so that a hitch for the Caravan won't work on the Montana, I'm sorry to say. I recommend going with the Curt Class III hitch, part # 13344 which gives you a 2" receiver which is the most common for accessories like a bike rack, cargo carrier, or ball mount for towing a trailer. I included a...
    view full answer...
  • Trailer Hitch, Wiring, and Accessory Recommendations for a 2003 Pontiac Montana
    The Curt trailer hitch # 13344, is a fit for a 2003 Pontiac Montana. The hitch fits all models of the 2003 Montanas. In terms of the different hitches available, see link, they will all look similar once installed. The receiver will be visible but most of the crosstube will be hidden behind the rear fascia. There are both 2 inch and 1-1/4 inch hitches available for this vehicle. The Curt hitch is a Class III with a 2 inch receiver. The 2 inch hitches are more versatile than the 1-1/4...
    view full answer...
  • Torque Settings for Curt Trailer Hitch # 13344
    If you take a look at the linked instructions, they will give you all the torque settings for the Class III Curt Trailer Hitch Receiver # 13344.
    view full answer...
  • Will the #13344 Curt Hitch Fit on a 2001 Oldsmobile Silhouette
    Yes, I checked with my contact at Curt Manufacturing and the Curt Class III Trailer Hitch, item # 13344, will fit on your 2001 Oldsmobile Silhouette. This hitch will fit the Oldsmobile Silhouette from 1997 to 2005 and includes the models with rear heat and air conditioning. I have linked to instructions below for you to review.
    view full answer...

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Lindsey S
Written by:
Lindsey S
Employee Nicholas E
Test Fit:
Nicholas E
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.