To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.7 out of 5 stars (72 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.It came quickly. The mechanic said it was bent, but that had occurred during shipping. He was able to make the hitch work.
Very easy to install and fit great. The only thing that could have made it easier would be to include a tape for the bolt holes because it is an older vehicle and those holes have gotten clogged with dirt and rust. But after finding a tap the job went smooth.
This is a great product and was sent very quickly. I installed this on a 2006 Jeep Liberty. I would recommend that before you start installing, that you get yourself a M12x1.75 tap for the factory receiving nuts under the vehicle. Mine were rusty and I could not have installed this without one. In order to get the tap into the front right nut, I had to move the exhaust out of the way which meant I had to pull off the rubber mounting bracket. This wasn't easy but I eventually got it to slide off with oil, channel locks, a screw driver, and some creativity. Getting it back on was much easier than getting it off but that took more time than everything else combined. Once I had access and got the nuts tapped, the intallation was a breeze and it looks great.
I ordered this for my 2007 Jeep Liberty. The package was mailed to my APO address and arrived quickly. The box didn't make it too good, but the bolts and other things were taped very well to the hitch itself and were in good shape. I wasn't expecting a box to hold a heavy hitch very well, but it made it ok. The main advantage was it was able to be mailed to my APO address.
The hitch mounted very easily. I did it by myself, so I got a box and put the hitch on it and got one side started with a bolt and then went to the other side. It went up easy. It fit perfectly and was mounted in about 30 minutes including the time to clean out the threads in the car frame. I am very very happy with the hitch and would suggest it to anyone that is looking for one. etrailer was absolutely excellent in their service.
One note!!! Make sure you get a 12mm course threat Tap (M12x1.75) to clean out the old rusted out threads that you are mounting the hitch to. I read that advice in a review and it was very very good info. I would have had a very hard time getting the bolts started without cleaning the threads out first.
The product came well packaged and just as expected. The installation was for a Jeep '06 Liberty and the fit was perfect. It looks great; only the receiver itself is visible. The only real delay was due to the holes in the frame being VERY dirty and that's not etrailer's fault :) I thought the bolts were too big at first but they were correct; there was just that much crud in the holes. The install would have been as estimated but the cleaning took me a couple of hours because of my limited tools. This wasn't the case on my other vehicle's install (only 30 minutes) but plan for it just in case.
Customer service is outstanding. This was my second receiver purchased at etrailer and I will be back...great shopping experience.
I liked the quality of the product that I receiveed the only issue that I had was when the box was delivered the trailer hitch was protruding through the bottom of the box. During installation it was apparent the hitch was no longer square and not all of the bolts would line up. I did manage to square it back up with a jack and install properly.
Perfect fit and install was a breeze. I was worried about parts being missing when I saw the condition the box came in. To my surprise the packer at etrailer had taped all the parts directly to the hitch so turned out to be no problem. The hitch looks great or I should say what you can see of it, because it is hidden well. Thanks again for everything and I will definatly be a lifelong customer.
My experience with etrailer.com was a great one. The sales rep. Rebecca N. was so delightful and knowledgeable. She walked me through the entire process right down to installation. Installing the hitch and wiring harness was simple. Thank you Rebecca and etrailers.com!
I will refer and do business with etrailer.com in the future.
I read the reviews and learned to tap out the holes before starting. Unfortunately the tap and die kit that I got had the regular long handle and the gas tank got in the way. After doing a few of them and taking a break I got creative and hammered the 12m 1.75 tap into a torx socket. Things went smoother after that until I had to put the last bolt in. No matter how I tried and tried to line them all up it wouldn't work right. After 15 minutes or so of struggling I was able to use the gas tank as a prop to get the last one close enough to get the blot started and tightened it the best I could. I am only using it to haul some landscaping thins in from time to time and I believe it should be fine. Otherwise I would have returned it and gotten one that lined up correctly.
It is a good trailer hitch but be for you start go buy new bolts wrong size I think by the reviews they should get it right
Patrick B.
11/15/2013
Check to make sure the weld-nuts are really clean first. Most of the times we get feedback about bolts being to large, the problem is actually corrosion and debris built up in the weld-nuts. Mistakes do happen and sometimes the wrong bolts are packaged. But making sure the weld-nuts are clean is the best first step. Re-sending the same properly sized bolts still wont work if the nuts are dirty or corroded.
Installed in less than 30 minutes on 2003 Jeep Liberty. Six bolts, will have to borrow a Torque wrench to complete installation before towing. Also purchased a wiring harness and 4-pole to 7-pole connector. After watching video on WEB site, completed the entire installation (hitch, wiring harness and connector in less than two (2) hours. By
Everything arrived as expected, although the box did have a nice sized hole where one side of the hitch had broken through. The hitch itself was not damaged though. The bolts that came with the kit were the correct size, however they were colored (goldish tint) like a grade 8 bolt, but did not have the grade 8 markings on the heads. I went to the store and replaced them with known grade 8 bolts.
Fitment was spot on, with no issues with bolt holes not lining up. I was quite pleased with how almost the complete hitch is hidden; the only part you see is the receiver itself. Nice!
Overall, I'm very pleased...
Suggestions:
1) My Liberty did not have the factory fuel tank skidplate, therefore there were no bolts in the existing mounting holes. This along with 5 years of salty winters made for some work with a tap to clean the threads out before installation. Like other's that had similar reviews, if this scenario fits, go ahead and source a 12mm coarse thread tap ahead of time. The passenger-side-forward mounting bolt is directly above the exhaust...it's tricky to get to with a long tap.
2) The hitch itself is heavy and awkward; a second set of hands is almost mandatory.
Hitch arrived at 3:23 pm. I arrived home at 4:42 pm and it installed by myself at 5:12 pm. Exhaust pipe got in the way of the last bolt on right side but able tighten with wrench. Will need to take tire off to torque correctly. I do have one suggestion, that being that the safety chain location should be moved forward as much as possible. As you it is directly over the pin and clip location which makes it cramped for a locking pin and safety chains.
1st Time Buyer through etrailer.comI am extremely happy with my first experience with etrailer.com. The whole process was simple and easy from the internet search to the ordering to the delivery of my products. I just, today, received my Trailer Hitch Receiver and accessories. I am sure that installing my said products will be just as easy.
I was especially impressed with etrailer's team that kept me up-to-date on the confirmation of my order to the date they shipped my products. The whole process took less than 5 days. I will in the future look to etrailer.com for any additional products I might need.
Thank you etrailer.com.
Love It!2006 Jeep Liberty. Ordered hitch, came super fast. Gas station guys put hitch on in less then 15 minutes, and they didn't even charge me! Perfect fit, couldn't be happier. Had to order the Hitch Adapter to fit my 1 1/4 thule bike rack that I got from my brother's friend, but that's okay cuz I saved money all around!!
When things go this smooth I'm a happy person!
Great customer service and follow up by etrailer personnel. I had some difficulty on the installation from the ground without putting the vehicle on a hoist or ramp. The overall experience was great, the instructions, video and website information was very helpful.
Hitch was just as described, it lined up perfectly. Super fast shipping. One problem - enclosed bolts were too large. I needed the hitch on to be able to pick up our new camper, couldn't what to have replacements sent, so I just went to Lowe's to buy the correct bolts. otherwise a great transaction
I am a 67 year old man . I purchased this hitch for a 2007 Jeep Liberity. It was heavy and well made. It fit perfectly, installation was a snap. I installed by my self in about 45 minutes. I have no pictures but it looks great .Intend to use it for bike rack and pull small trailer.Thanks for a great product and great service. Leonard S.
Hitch arrived in less than 5 days with standard shipping. Hitch was very easy to install. I recommend retapping the holes. Just remember they are metric not SAE. Perfect fit less than a quarter inch under bumper. Instructions were very easy to follow and having the YouTube link online was a great help.
Quality product. It took a little persuasion to make it fit around the gas tank guard on my 2003 Jeep Liberty, but it worked. The shape of the shield wouldn't allow the holes to line up so i bent the shield a little to make it work. Not easy, but that's expected with aftermarket parts sometimes. Excellent service from etrailer -they upgraded my already free shipping and my entire order arrived in 3 days!
Screws were missing and staff was okay at best. Hitch did it's thing though... won't be shopping here again.
E-trailer upgraded my shipping at no cost. My hitch came with no damage and 4 days earlier than I expected. The install went effortlessly. I will always use and recommend in the future
Received the package yesterday afternoon---outstan service from order (Janice) to shipping dept.
Note: thank you to the shipping person for taping the 5 loose items to the hitch itself ( fillament tape ROCKS)-Received all even though box was shreaded in transit. I am very impressed with the quality welding on hitch and cant wait to install this weekend .Will pass on my excellent service to others.
A fine job by American workers!!!!
The hitch is Awesome, however the box it was shipped in was a mess. Lucky the hitch was not damaged nor the bolts were lost. It took about fourteen days to get here but that was due to weather. Again thank you for great help.
I got a trailer hitch and wiring harness for a 2007 Jeep Liberty. The products were shipped quickly and customer service was great. Instructions were included that made the install go very smoothly (in addition to videos on youtube). I would not hesitate to purchase from etrailer again.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Timothy R.
5/31/2021
It is working great have had no trouble.