Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Retractable cover opens and closes manually with a pop-up, locking handle that provides excellent security for your truck bed. Durable polycarbonate is long-lasting and supremely weather resistant. Sleek, streamlined design complements your vehicle.
Features:
Specs:
The RetraxONE MX offers excellent security and protection for the items in your truck bed. This tonneau cover can withstand impacts and inclement weather, and it can perform in temperatures between -50 and 200 degrees F. It won't swell in the heat, contract in the cold, or crack in ice storms, unlike some other tonneau covers out there. And you can secure this retractable cover at any point along the rails with an easy-to-use, locking handle, all to ensure that your gear stays safe and protected.
This tonneau cover retracts quickly and easily for complete truck bed access. It does this by gliding along the side rails with sealed ball-bearing rollers, which also prevent the cover from binding or retracting unevenly. The RetraxONE MX has no joints or hinges that can wear out, freeze, or trap dirt. It does not need to be lubricated and it has no springs that can fail. Unlike other truck bed covers on the market, you won't have to struggle with pull straps, hook-and-loop fasteners, or snaps every time you open and close the cover.
At the end of the cover, on the driver's side, there is a pop-up handle that makes it easy to slide the cover up and down the length of your truck bed with just one hand. The handle must be popped up for the tonneau to move, but you can push or pull the cover to guide it along the rails from either side of your truck.
When not in use, the cover rolls up into a space-saving storage canister at the bulkhead of your truck, so you'll never have to remove the tonneau to access your cargo. This canister has a unique spiral track system that keeps the cover from coming into contact with itself while it's retracted. This helps prevent wear and tear on the cover while you're opening and closing it.
With the cover fully retracted, the entire canister assembly only takes up a small portion of your truck bed. And the angled bottom of the canister gives you more space to slide long items or small gear underneath it.
When the RetraxONE MX is closed, potential thieves will find it nearly impossible to access the items in your truck bed. The locking handle is mounted flat and is concealed with a lid, keeping it well hidden from prying eyes. This flat, weather-guarded lid also keeps out dirt and debris to prevent internal corrosion in the keyhole, ensuring that the lock lasts longer and won't seize up.
To unlock the cover, lift the lid on the lock, insert and twist the key, and press the button to release the pop-up handle. Once the handle is up, you can slide the cover back.
You can latch the cover at any position along the rails by pushing the handle back down. This lock-in-place feature enables you to carry long items that overlap your tailgate while still covering cargo, such as a tackle box, that's stored closer to the bulkhead of the truck.
This cover is better at preventing cargo theft than soft covers, which can be cut open with a knife. It also cannot be pried up at the edges like some hard, folding covers. As a result, your cargo and truck bed are secure when this cover is closed and latched, as long as you lock your tailgate as well. Conveniently, the cover operates independent of the tailgate, so you can open and close the tailgate without touching the cover, and you can open and close the cover without disturbing the tailgate.
To keep snow, water, and dust out of your bed, the tonneau cover includes weather stripping and foam seals. An automotive-grade weather strip ensures a firm, dependable seal along the bulkhead of your truck. Attached to the bottom of each side rail is a foam seal that conforms to the shape of your bed rails. These seals help to prevent any scratches on your bed rails as well as fill any gaps to keep your cargo from getting wet or dirty. The cover also overlaps the top of the tailgate for additional protection against intrusive dirt and debris.
The RetraxONE MX is constructed of a polycarbonate known as Lexan - the same material used to make bulletproof glass and jet fighter canopies. It has excellent dent and impact resistance to keep it from getting damaged by falling debris. Additionally, 5/8" thick aluminum I-beams are embedded into the polycarbonate every 4-3/4" to give the cover added strength. As a result, this cover can hold up to 200 lbs of snow or evenly distributed weight when it's rolled out.
You'll never have to worry about the cover cracking in the cold or bubbling or fading in the hot sun because it's designed to perform in temperatures from -50 and 200 F, and its hard thermoplastic is UV treated to protect it from fading. On hot summer days, Lexan is cooler to the touch than metal, so you won't get burned when accessing your gear. And on top of that, its durable matte black finish is weather and scratch resistant.
To prevent mildew from forming on the cover while it's rolled up, the RetraxONE MX features a water management system that channels excess water out of the storage canister. Two drain tubes attach to the bottom of the canister to remove any water that gets inside. The tubes then route water through the existing drain holes in the floor of your truck bed, ensuring that the stored cover remains as dry as possible.
When rolled out, this tonneau sits nearly flush with the back of the canister to give a streamlined look. In addition to the flush-mounted locking handle, the sleek frame features a top panel that overlaps the bulkhead of the truck and storage canister, eliminating the gap in between.
The low-profile side rails mount just 1" above your truck bed, which offers a sleek look while still providing enough clearance for most 5th-wheel hitches to remain installed beneath the cover.
To install the RetraxONE MX, begin by attaching the side rails to the canister with the provided screws.
Because the cover comes preinstalled inside of the canister, it will take 2 people to lift the assembled unit and place it on your truck. Once the cover is in position, make sure that the side rails are square on your truck bed rails. Then secure them in place with the bolt-on clamps. Finally, install the drain tubes in the canister and route them through the factory holes in your truck bed.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (16 Customer Reviews)
Retractable cover opens and closes manually with a pop-up, locking handle that provides excellent security for your truck bed. Durable polycarbonate is long-lasting and supremely weather resistant. Sleek, streamlined design complements your vehicle.
One year update: My RetraxONE MX still looks and performs good. For my application (fifth wheel protection) it was a good choice.
I am very happy with the cover. It is exactly what I needed and it works great.
Thanks for the follow up. Everything I have ordered from etrailer has performed great.
You are my go to website.
I spoke with Jesse who was very helpful in helping me pick out this product for my 2006 Toyota Tacoma. He was also very helpful when he informed me that I needed a tailgate lock. The product arrived in a timely manner and was as advertised. My daughters and I set up the RetraxONE MX Hard Tonneau Cover pretty quickly. The installation was simple and straight-forward. Would purchase again from etrailer.
The unit shipped to my location with over a months delay. This was too late for our last camping trip of2 2021, which I was counting on using it. I installed this year instead. Some of the tapped holes need to be re-tapped. Also, drain plugs were a little tricky in that the hose interfered with that latching mechanism, so they did not latch correctly at first. The roll-up into the box does not seem as smooth as the videos seem to show. Roll down to close is smooth.
Installation straightforward, well buil t.
I was pleasantly surprised by the quality and durability. I like the ability to cover, lock and latch in partially closed position to help support large items. I'm sure I'm getting a little bit better gas mileage because of the drag reduction off the bed. The only drawback: the space that the canister takes up reduces your bed size. It hasn't impacted me yet as I have the larger bed size. If you have a bed extender, that will help. I definitely like the retractable better that the folding ones.
Great cover, not a minutes trouble after a year on the truck.
this is a great product if your on the fence pull the string easy to install works good.
A little challenging at first with the directions but with my neighbor helping we pulled through. 3-4 hours of slow methodical reading and working. Very nice product looks great and works as advertised.
It fits great looks great it works e-trailer is a great company to use
Excellent product. Easy do it yourself installation and looks and works great. Very high quality.
Everything was on time and good quality. Easy to install, but you need to open the lock before installing the rail. If the lock is in the lock or down position the rail won’t go on. Other than that it was easy and it looks great on the truck!
Great Tonneau
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.